Opel Frontera UBS. Service manual — part 2562
AUTOMATIC TRANSMISSION (AW30-40LE)
7A–111
241RY00013
Using special tool, install a new oil seal.
The oil seal end should be flush with the outer edge of the
pump body.
Oil seal installer: 5-8840-2256-0 (J-9617)
Coat the oil seal lip with multi purpose grease.
7A–112
AUTOMATIC TRANSMISSION (AW30-40LE)
REASSEMBLY
241RY00019
241RY00014
Important operations
1. Oil pump driven gear
Place the oil pump body on the torque converter.
Coat the driven gear and drive gear with ATF.
Install the driven gear and drive gear.
Reassembly steps
▲
1. Oil pump driven gear
2. Oil pump drive gear
▲
3. Stator shaft
▲
4. Oil seal ring
▲
5. O-ring
AUTOMATIC TRANSMISSION (AW30-40LE)
7A–113
241RY00006
241RY00015
241RY00016
241RY00017
3. Stator shaft
Align the stator shaft with the bolt holes.
Tighten the thirteen bolts.
4. Oil seal ring
Coat the oil seal rings with ATF.
Contract the oil seal rings as shown, and install them onto
the stator shaft.
NOTE:
Do not spread the ring ends too much.
5. O-ring
Coat a new O-ring with ATF and install it to the oil pump
body.
Check oil pump drive gear rotation
Make sure the drive gear rotates smoothly when installed to
the torque converter.
N·m (kg·m/Ib in)
Torque
11 (1.1/95)
O-ring size (Reference)
mm (in.)
Inside diameter
204.9 (8.067)
Thickness
3.5 (0.138)
7A–114
AUTOMATIC TRANSMISSION (AW30-40LE)
OD PLANETARY GEAR AND OD DIRECT CLUTCH ASSEMBLY (C-0)
DISASSEMBLY
252L100002
Disassembly steps
▲
1. OD direct clutch assembly
▲
2. Thrust bearing
▲
3. Snap ring
▲
4. Flange, disc and plate
▲
5. Snap ring
▲
6. Piston return spring
▲
7. OD direct clutch piston with O-ring
▲
8. O-ring
▲
9. Thrust bearing
▲
10. Snap ring
▲
11. Ring gear flange
12. Race
▲
13. Snap ring
▲
14. Retaining plate
▲
15. OD one-way clutch
16. Thrust washer
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст