Opel Frontera UBS. Service manual — part 581
MANUAL TRANSMISSION
7B–29
2. Using remover 5–8840–2551–0 (J–42795) and
attachment 5–8840–2560–0 (J–42988), remove
counter gear shaft center bearing.
NOTE: Be careful not to drop the counter gear, when
removing the bearing.
226RW199
3. Remove the counter gear from intermediate
plate.
226RW030
19. Disassemble the counter gear shaft assembly.
1. Using snap ring pliers, remove the counter gear
shaft front bearing snap ring.
226RW065
2. Using bearing separator 5–8840–0015–0
(J–22912–01) and a press, remove the bearing.
226RW200
7B–30 MANUAL TRANSMISSION
20. Remove the top gear shaft.
1. Remove the top gear shaft from mainshaft.
NOTE: Don’t fall needle roller bearing.
226RW029
2. Remove the 4th block ring and roller bearing.
226RW031
21. Disassemble the top gear shaft assembly.
1. Check for wear or damage.
226RW033
2. Remove the front bearing shaft snap ring.
226RW062
MANUAL TRANSMISSION
7B–31
3. Using bearing separator 5–8840–0015–0
(J–22912–01) and a press, remove the bearing.
226RW202
22. Remove the mainshaft.
1. Remove mainshaft bearing snap ring.
226RW035
2. Using a plastic hammer, tap the 5th-reverse shift
rod at the reverse shift side.
226RW034
3. Remove the intermediate plate from a vise.
4. Remove the mainshaft, 1st-2nd shift arm and
3rd-4th shift arm.
226RW014
7B–32 MANUAL TRANSMISSION
23. Disassemble the mainshaft assembly.
1. Inspect each gear thrust clearance.
1. Using thickness gauge, inspect thrust
clearance (1st gear, 3rd gear).
226RW077
2. Mount the mainshaft through the aluminum
plate in a vise.
3. Using a dial indicator, measure each gear
thrust clearance.
Gear
Standard Clearanse
1st
0.15 – 0.45 mm (0.0059 – 0.0177 in)
2nd
0.10 – 0.25 mm (0.0039 – 0.0098 in)
3rd
0.10 – 0.25 mm (0.0039 – 0.0098 in)
226RW070
2. Inspect each gear radial clearance
1. Using a dial indicator, measure the radial
clearance of each gear.
Gear
Standard Clearanse
1st
0.020 – 0.074 mm (0.00078 – 0.00291 in)
2nd
0.015 – 0.068 mm (0.00059 – 0.00268 in)
3rd
0.015 – 0.068 mm (0.00059 – 0.00268 in)
226RW071
3. Using 2 screwdrivers and hammer, tap out the
snap ring.
226RW053
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст