Chevrolet Silverado / GMC Sierra. Service manual — part 2985

Fig. 64: View Of Regulator & Screw
Courtesy of GENERAL MOTORS CORP.

3. Install the rear sliding window motor/module nuts (2).

Tighten: Tighten nut to 10 N.m (89 lb in).

NOTE:

Refer to Fastener Notice .

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

4. Install the rear sliding window regulator and cables (2) to the motor/module.

5. Install the bolt (1) to the rear sliding window regulator and cables (2).

Tighten: Tighten bolt to 11 N.m (97 lb in).

6. Install the rear sliding window lower garnish molding. Refer to Rear Window Lower

Garnish Molding Replacement (Regular Cab) or Rear Window Lower Garnish
Molding Replacement (Ext Cab/Crew Cab w/A48) or Rear Window Lower Garnish
Molding Replacement (Ext Cab/Crew Cab w/o A48) .

7. Inspect the rear sliding window for proper operation.

DOOR WINDOW REGULATOR HANDLE REPLACEMENT

Fig. 65: View Of Side Door Window Regulator Handle Assembly & Retainer Clip
Courtesy of GENERAL MOTORS CORP.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

STATIONARY WINDOW REVEAL MOLDING REPAIR

Removal Procedure

Fig. 66: Identifying Reveal Molding
Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

1

Side Door Window Regulator Handle Retainer Clip

2

Side Door Window Regulator Handle Assembly
Tip: Use the J 9886-01 Door Handle Clip Remover to remove the crank
handle. See Special Tools.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

1. Lift up on the loose area of the reveal molding.

2. Clean the top edge of the window surface and the reveal molding with a 50/50 mixture of

isopropyl alcohol and water by volume on a dampened lint-free cloth.

Installation Procedure

1. Verify all primers and urethane adhesive are within expiration dates.

Fig. 67: Applying Glass Prep
Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to GLASS AND SHEET METAL HANDLING

CAUTION .

IMPORTANT: The window reveal molding fills the cavity between the body

and window. If the reveal molding is stretched or damaged, it
cannot be reused and it must be replaced.

CAUTION: Refer to Window Retention Caution .

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado