Peugeot 607 Dag (2009 year). Manual — part 10
127
99
11
11
12
12
13
13
15
15
10
10
14
14
Press the dial to confi rm the selection.
Turn the dial and select the letters of
the town one by one confi rming each
time by pressing the dial.
Turn the dial and select OK.
Press the dial to confi rm the selection.
To speed up the process, the POST
CODE can be entered instead of the
name of the town.
Use the alphanumeric keypad to
enter the letters and digits and "C" to
correct.
Press the dial to confi rm the selection.
Select OK on the ENTER AN
ADDRESS page.
Repeat steps 8 to 12 for the ROAD and N° functions.
Select the STORE function to record the address entered in a
directory record and press the dial to confi rm the selection.
The points of interest (POI) indicate all of the service locations in
the vicinity (hotels, various businesses, airports, ...).
OK
OK
STORE
PARIS
POI
128
1
1
22
33
44
55
66
77
88
03
GUIDANCE OPTIONS
GPS
The route chosen by the audio equipment depends directly on the guidance
options.
Changing these options may completely change the route.
Press the MENU button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to confi rm the selection.
Turn the dial and select the
GUIDANCE OPTIONS function.
Turn the dial and select the DEFINE
CALCULATION CRITERIA function.
Press the dial to confi rm the selection.
Press the dial to confi rm the selection.
Turn the dial and select, for example,
the DISTANCE/TIME function.
GUIDANCE OPTIONS
DISTANCE/TIME
DEFINE CALCULATION CRITERIA
129
99
10
10
11
11
12
12
22
33
1
1
Turn the dial and select the TRAFFIC
INFO function if it is not ticked.
Press the dial to confi rm the selection.
Select OK and press the dial to
confi rm.
Press the dial to confi rm the selection.
Tick this box for optimum operation of the traffi c information,
diversions will be suggested.
OK
SETTING HAZARDOUS AREAS
ALERT PARAMETERS
Turn the dial and select the
SET HAZARDOUS AREAS
PARAMETERS function, then press
the dial to confi rm the warning
message. Press the dial to confi rm
the selection.
Select:
- visual warnings,
- audible warnings with an
announcement duration
(in seconds),
- warn during guidance only, then
select OK and press the dial to
confi rm.
These functions are only available if the hazardous areas have
been downloaded and installed on the system.
The hazardous areas are, in general, fi xed speed cameras, level
crossings, dangerous uphill and downhill gradients. They may
change on a regular basis.
Repeat steps 1 to 5 of the guidance option.
TRAFFIC INFO
SET HAZARDOUS AREAS PARAMETERS
130
1
1
22
33
44
55
66
88
77
03
Press the dial then adjust the volume
of the speech synthesis or select the
DEACTIVATE function and press the
dial to confi rm.
GPS
GUIDANCE SPEECH SYNTHESIS
Press the dial to confi rm the selection.
During announcements, the volume of each speech synthesis
function (guidance, traffi c information...) can be adjusted directly
using the volume button.
Select the ADJUST SPEECH
SYNTHESIS function and press the
dial to confi rm.
Select OK and press the dial to
confi rm.
Press the MENU button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to confi rm the selection.
Turn the dial and select the
GUIDANCE OPTIONS function.
GUIDANCE OPTIONS
ADJUST SPEECH SYNTHESIS
DEACTIVATE
OK
131
03
1
1
22
33
44
55
66
77
44
GPS
Press the MENU button.
Turn the dial and select the MAP
function.
Press the dial to confi rm the selection.
Turn the dial and select the
MAP DETAILS function.
Permits selection of the services
which can be seen on the map (hotels,
restaurants, hazardous areas...).
ACTIONS ON THE MAP
Press the dial to confi rm the selection.
Turn the dial and select the
orientation of your choice.
Select OK and press the dial to
confi rm.
Repeat steps 1 to 3 then turn the dial
and select the MAP ORIENTATION
function.
MAP ORIENTATION
For improved visibility, beyond the scale of 6 miles (10 km), the map
automatically switches to North Orientation.
MAP DETAILS
MAP ORIENTATION
OK
132
22
33
44
1
1
55
66
77
03
Press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the MAP
function.
Turn the dial and select the MAP IN
WINDOW or FULL SCREEN MAP
tab.
Select OK
and press the dial to confi rm.
Press the dial to confi rm the selection.
Turn the dial and select the DISPLAY
MAP function.
DISPLAYING THE MAP IN A WINDOW OR
IN FULL SCREEN MODE
GPS
DISPLAY MAP
FULL SCREEN MAP
OK
MAP IN WINDOW
133
03
List of POI
GPS
Flying club
Airport
Lay-by
Bowling alley
Casino
Business park
Sports centre
Town centre
Cinema
Sports complexes
Culture/Museum
Vineyard
Garage
Station
Dock station
Bus station
Hospitals
Hotels
Vehicle hire
Town halls
Historical monuments
Tourist information
Theme park
Park/Garden
Park and ride
Car park
Covered parking
Skating rink
Ports
Restaurant
Shopping
Show/Exhibition
Winter sports centre
Service station
Supermarkets
Golf course
Tourism
University
Night life
134
1
1
2
33
44
55
99
88
77
6
03
During guidance, press the MENU
button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to confi rm the selection.
Turn the dial and select the
JOURNEY LEGS AND ROUTE
function.
Select OK and press the dial to
confi rm the order of the stages.
When the new address has been
entered, select OK and press the dial
to confi rm.
Enter for example a new address.
Select the ADD A STAGE function
(9 stages maximum) and press the
dial to confi rm.
Press the dial to confi rm the selection.
Select STRICT (the stage must be completed in order to continue to
the next destination) or PROXIMITY then press the dial to confi rm.
GPS
JOURNEY LEGS AND ROUTE
ENTER AN ADDRESS
ADD A STAGE
135
1
1
2
3
4
5
66
7
88
04
We recommend a fi lter on the route and a fi lter around the vehicle of:
- 3 miles (5 km) or 6 miles (10 km) for a region with heavy traffi c,
- 12 miles (20 km) for a region with a normal level of traffi c,
- 60 miles (100 km) for long journeys (motorway).
Press the MENU button.
Turn the dial and select the TRAFFIC
INFORMATION function.
Press the dial to confi rm the selection.
Turn the dial and select the FILTER
TRAFFIC INFORMATION function.
TRAFFIC INFORMATION
Press the dial to confi rm the
selection.
Select the GEOGRAPHIC FILTER
function and press the dial to confi rm.
Turn the dial and select the fi lter of
your choice.
Select OK and press the dial to
confi rm.
FILTER TRAFFIC INFORMATION
GEOGRAPHIC FILTER
OK
136
1
1
2
33
44
66
55
77
04
Turn the dial and select the
CONFIGURE MESSAGE
ANNOUNCEMENT function.
Select the READ MESSAGES tab.
The Traffi c Information Messages will
be read by the voice synthesiser.
Select the NEW MESSAGE DISPLAY
tab.
The traffi c information messages
are extended to the fi lters selected
(geographic...) and can also be
displayed when guidance is not active.
Press the MENU button.
CONFIGURING THE TMC MESSAGE
ANNOUNCEMENTS
We recommend that you do not tick the NEW MESSAGE DISPLAY tab for regions with heavy traffi c.
Turn the dial and select the TRAFFIC
INFORMATION function.
Press the dial to confi rm the selection.
Press the dial to confi rm the selection.
TRAFFIC INFORMATION
Select OK and press the dial to
confi rm.
NEW MESSAGE DISPLAY
OK
READ MESSAGES
CONFIGURE MESSAGE ANNOUNCEMENT
137
1
1
22
33
44
1
1
22
33
44
05
RADIO
SELECTING A STATION
Press the SOURCE button several
times in succession and select the
RADIO.
Press the BAND AST button to select
a waveband: FM1, FM2, FMast, AM.
Briefl y press one of the buttons to
carry out an automatic search of the
radio stations.
Press one of the buttons to carry out a
manual search of the radio stations.
Press the LIST button to display the
list of stations received locally
(60 maximum).
To update this list, press for more than
two seconds.
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception,
including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does
not indicate any failure of the audio equipment.
RDS
Select ACTIVATE FREQUENCY
FOLLOWING (RDS) then press OK.
RDS appears on the display.
Select the FM WAVEBAND
PREFERENCES function then press OK.
Select AUDIO FUNCTIONS then
press OK.
Press the MENU button.
The RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative fequencies. However, in
certain conditions, coverage of an RDS station may not be assured
throughout the country as radio stations do not cover 100 % of the
territory. This explains the loss of reception of the station during a
journey.
FM WAVEBAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)
138
1
1
22
05 AUDIO/VIDEO
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer
3, is an audio compression standard which permits the recording of
several tens of music fi les on a single disc.
In order to be able to play a recorded CDR/DVDR or CDRW/
DVDRW, when recording it is preferable to select standards
ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played
correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
The audio equipment will only play audio fi les with the extension
".mp3" with a sampling rate of 22.05 KHz or 44.1 KHz. No other type
of fi le (.wma, .mp4, .m3u...) can be played.
It is advisable to restrict fi le names to 20 characters without using
special characters (e.g.: " ? ; ù) to avoid any playing or displaying
problems.
Insert circular compact discs only. Some anti-pirating
systems, on original discs or CDs copied using
a personal recorder, may generate malfunctions
regardless of the quality of the original player.
Insert an audio CD or an MP3 compilation in the player,
play begins automatically.
If the player already contains a disc,
press the SOURCE button several
times in succession and select CD to
listen to it.
Press one of the buttons to select a
track on the CD.
Press the LIST button to display
the list of tracks on the CD or of the
directories of the MP3 compilation.
The playing and displaying of an MP3 compilation may depend on
the recording programme and/or the parameter settings used. We
recommend use of the ISO 9660 recording standard.
MP3 CD
INFORMATION AND ADVICE
CD
PLAYING A CD OR AN MP3 COMPILATION
139
22
33
1
1
55
66
44
the dial to confi rm.
Select COPY CD TO JUKEBOX and
press the dial to confi rm.
Select COMPLETE CD to copy
the entire CD and press the dial to
confi rm.
The AUTO CREATION tab automatically copies the CD by default
into an album of the type "album n°...".
The audio or MP3 CD is copied onto the hard disc. Copying may
take approximately 20 minutes depending on the duration of the CD.
During this copying phase, it is not possible to listen to the albums
previously recorded on the hard disc or the CDs.
Select the letters one by one and select
OK to confi rm.
If it is not an MP3 CD, the Jukebox automatically compresses the
CD in MP3 format. The compression may take approximately
20 minutes depending on the duration of the CD. During this
compression phase, it is possible to listen to the CD or to albums
previously recorded on the hard disc.
Select AUDIO FUNCTIONS and press
the dial to confi rm.
Insert a CD or an MP3 compilation
and press the MENU button.
JUKEBOX FUNCTION
COPYING A CD ONTO THE HARD DISC
COPY CD TO JUKEBOX
COMPLETE CD
CREATE ALBUM
OK
A long press on the SOURCE button starts the copying of the CD.
When copying an MP3 CD, the Jukebox only retains the last album
level. It is not possible to copy fi les from the Jukebox to a CD.
The STOP THE CD COPY action does not delete the fi les which
have already been transferred onto the jukebox hard disc.
140
22
1
1
33
44
55
22
33
1
1
Select USB and press the dial to
confi rm.
Select COPY USB TO JUKEBOX and
press the dial to confi rm.
Select COMPLETE DISC to copy the
entire USB stick and press the dial to
confi rm.
Select AUDIO FUNCTIONS and press
the dial to confi rm.
Insert a USB stick in the space provided
and press the MENU button.
JUKEBOX FUNCTION
COPYING AN MP3 USB STICK ONTO THE HARD DISC
Press one of the buttons to select a
track on the USB stick.
Press the LIST button to display the list
of folders on the MP3 USB stick.
To eject the USB stick, press the MENU button, select AUDIO
FUNCTIONS, USB, then select EJECT USB.
The playing and displaying of an MP3 compilation may depend on
the parameters programme used.
JUKEBOX FUNCTION
PLAYING AN MP3 USB STICK
Insert a USB stick in the space provided.
Insert a USB stick in the space provided.
If another source is being played, press the SOURCE
If another source is being played, press the SOURCE
button several times in succession and select USB to
button several times in succession and select USB to
play it.
USB
COPY USB TO JUKEBOX
AUDIO FUNCTIONS
COMPLETE DISC
141
66
77
55
22
33
44
1
1
Press the MENU button.
Select AUDIO FUNCTIONS and
press the dial to confi rm.
Select the JUKEBOX function and
press the dial to confi rm.
Select the JUKEBOX MANAGEMENT
function and press the dial to confi rm.
Select the album to be renamed and
press the dial to confi rm.
Select the RENAME tab and press the
dial to confi rm.
Turn the dial and select the letters of
the album title one by one confi rming
each time by pressing the dial.
Use the alphanumeric keypad to enter the letters of the album title
one by one.
JUKEBOX FUNCTION
RENAMING AN ALBUM
AUDIO FUNCTIONS
JUKEBOX
JUKEBOX MANAGEMENT
RENAME
142
88
1
1
33
2
Press the SOURCE button several
times in succession and select the
JUKEBOX function.
Press the LIST button.
Turn the dial to select the fi les.
Press the ESC button to return to the fi rst fi le level.
JUKEBOX
Select OK and press the dial to
confi rm.
To rename the tracks of an album, follow the same procedure,
selecting the tracks to be renamed.
Use the ESC button to exit from the list of tracks.
Select the DELETE function to delete an album or a
track from the Jukebox.
JUKEBOX FUNCTION
LISTENING TO THE JUKEBOX
DELETE
OK
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст