Peugeot 307 Break (2007 year). Manual — part 6

72

Automatic switching on of the

lights

Side lights and dipped beam head-

lamps switch on automatically if the

light is poor, or during operation of

the windscreen wipers. They switch

off as soon as the light becomes

bright enough or the windscreen wip-

ers stop.

Note: in foggy weather or in snow,

the brightness sensor can detect suf-

ficient light. As a consequence, the

lights will not come on automatically.

Deactivation


Turn ring

A to a position other

than

"AUTO". Switching off is ac-

companied by a message on the

multifunction display.

If the brightness sensor does not

function correctly, the lights come

on accompanied by the service

warning light, an audible signal and

a message on the multifunction dis-

play.

Contact a PEUGEOT dealer.

Manual "Follow-me-home" lighting

When the automatic switching on of

the lights function is deactivated, the

side lights and dipped headlamps re-

main on for the duration selected for the

automatic "follow-me-home" lighting.

If the vehicle is not fitted with the

automatic switching on of the lights

function, when you leave your vehicle,

the side lights and dipped headlamps

remain on for thirty seconds.

Direction indicators (flashers)

Left: downwards.

Right: upwards.

Note: if you forget to cancel the di-

rection indicator, the volume of the

audible signal will increase, if you

are driving at a speed greater than

50 mph (80 km/h).

Automatic "Follow me home"

lighting

With the ignition off, when you leave

your vehicle with the

automatic

switching on of the lights function

activated, the side lights and dipped

headlamps remain on for the select-

ed duration.

Activation:


switch off the engine,



"flash" the headlamps,



get out of the vehicle and lock it.

Deactivation:


"flash" the headlamps again,



get out of the vehicle and lock it.

To deactivate or activate

this function, go to the mul-

tifunction display configura-

tion menu.

The duration of the timed

period must also be set (15, 30,

60 seconds), via the multifunction

display configuration menu, except

in the case of the

monochrome

screen A for which it is pre-set.

Cancelling:


"flash" the headlamps,



get out of the vehicle and lock it.

Activation


Turn ring

A to the "AUTO" position.

The automatic lighting is accompa-

nied by a message on the multifunc-

tion display.

Do not cover the brightness

sensor, coupled with the rain

sensor, located in the centre

of the windscreen, behind

the interior mirror. It is used for the

automatic switching on of the lights.

73

For vehicles fitted with halogen

bulbs, depending on the load in your

vehicle, adjusting the beam of your

headlamps is recommended.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 5 people.

2. 5 people + maximum authorised

loads.

3. Driver + maximum authorised

loads.

Initial setting is position 0.

On vehicles with xenon bulbs:

when stationary, the system auto-

matically corrects the height of the

beam, whatever the load of the ve-

hicle. The driver is then assured of

having optimum lighting and not

causing a nuisance to other road

users.

In cases of malfunction,

the service warning light

comes on on the instrument

panel, accompanied by an

audible signal and a mes-

sage on the multifunction display.

The system places your headlamps

to the low position.

Do not touch the xenon bulbs.

Contact a PEUGEOT dealer.

Daytime lights*

On vehicles which are equipped with

daytime lights, the dipped headlamps

come on when the vehicle is started.

* According to country.

The instruments and controls

(instrument panel, multifunc-

tion display, air conditioning

control panel, ...) are only lit

on switching to the automatic switch-

ing on of the lights mode or when the

lights are switched on manually.

This warning light comes

on on the instrument panel.

MANUAL ADJUSTMENT OF

THE HEADLAMPS

AUTOMATIC HEADLAMP

ADJUSTMENT

74

Special position of the front

windscreen wiper

In the minute following switching off

of the ignition, any action on the stalk

positions the wipers in the centre of

the windscreen.

This action enables you to position

the wiper blades for winter parking,

cleaning or replacement (See sec-

tion "Practical information - Chang-

ing a wiper blade").

To park the wipers after this has

been done, switch on the ignition and

operate the stalk.

Windscreen and headlamp wash

Pull the windscreen wiper stalk to-

wards you. The windscreen wash

then the windscreen wipers operate

for a fixed period.

The headlamp wash is also activated,

if the headlamps are on.

WINDSCREEN WIPER STALK

2

Fast wipe (heavy rain).

1

Normal wipe

(moderate rain).

I

Intermittent wipe.

0

Off.

AUTO  Automatic or single wipe

(press downwards).

In the

Intermittent position, the wiping

speed is in proportion to the speed of

the vehicle.

In

AUTO mode, the wiping speed is

in proportion to the intensity of the

rainfall. The first press of the stalk

downwards activates the automatic

wipe.

Subsequent presses trigger a single

wipe.

Front windscreen wiper with

intermittent wipe

2 Fast wipe

(heavy rain).

1 Normal wipe

(moderate rain).

l

Intermittent wipe.

0 Off.


Single wipe

(press downwards).

In the

Intermittent position, the

wiping speed is in proportion to the

vehicle speed.

Front windscreen wiper with

automatic wipe

75

Automatic windscreen

wipers

In

AUTO mode, the windscreen wip-

ers operate automatically and

adapt

their speed to the intensity of the

rainfall.

Do not cover the rain sensor

located on the windscreen

behind the interior mirror.

When using an automatic car

wash, switch off the ignition.

In winter, it is advisable to wait for the

windscreen to completely clear of ice

before operating the automatic wipe.

Activation

Activation of the function is accom-

panied by a message on the multi-

function display.

Rear windscreen wiper

To activate or deactivate

this function, go to the multi-

function display configura-

tion menu.

If there is a significant accumulation

of snow or ice and when using a bi-

cycle carrier on the tailgate (estate),

deactivate the automatic rear wiper

by going to the multifunction display

configuration menu.

Rear windscreen wash

Deactivation

Deactivation of the function is

accompanied by a message on the

multifunction display.

The function is deactivated when the

windscreen wipers stalk is moved to

position

I, 1 or 2.

In the event of malfunction of the

automatic windscreen wipers, the

windscreen wipers will operate in in-

termittent mode.

Contact a PEUGEOT dealer to have

the system checked.

Turn ring

A past the first

A

A

notch; the windscreen wash

then the windscreen wiper

operate for a fixed period.

Turn ring

A to the first notch

for intermittent wiping.

When reverse gear is en-

gaged, if the windscreen

wipers are in operation, the

rear wiper starts.

The automatic windscreen

wipers function must be

reactivated if the ignition

has been switched off for

more than one minute, by press-

ing the stalk downwards.

75

Automatic windscreen

wipers

In

AUTO mode, the windscreen wip-

ers operate automatically and

adapt

their speed to the intensity of the

rainfall.

Do not cover the rain sensor

located on the windscreen

behind the interior mirror.

When using an automatic car

wash, switch off the ignition.

In winter, it is advisable to wait for the

windscreen to completely clear of ice

before operating the automatic wipe.

Activation

Activation of the function is accom-

panied by a message on the multi-

function display.

Rear windscreen wiper

To activate or deactivate

this function, go to the multi-

function display configura-

tion menu.

If there is a significant accumulation

of snow or ice and when using a bi-

cycle carrier on the tailgate (estate),

deactivate the automatic rear wiper

by going to the multifunction display

configuration menu.

Rear windscreen wash

Deactivation

Deactivation of the function is

accompanied by a message on the

multifunction display.

The function is deactivated when the

windscreen wipers stalk is moved to

position

I, 1 or 2.

In the event of malfunction of the

automatic windscreen wipers, the

windscreen wipers will operate in in-

termittent mode.

Contact a PEUGEOT dealer to have

the system checked.

Turn ring

A past the first

A

A

notch; the windscreen wash

then the windscreen wiper

operate for a fixed period.

Turn ring

A to the first notch

for intermittent wiping.

When reverse gear is en-

gaged, if the windscreen

wipers are in operation, the

rear wiper starts.

The automatic windscreen

wipers function must be

reactivated if the ignition

has been switched off for

more than one minute, by press-

ing the stalk downwards.

76

1. Front courtesy light

2. Map reading lights

Permanently off.

Permanently on.

It switches off gradually:

- when the vehicle is locked,

- when the ignition is switched on,

- with the ignition off, 30 seconds af-

ter the last door is closed.

In this position, the courtesy

light comes on automati-

cally:

- when the vehicle is unlocked,

- when the key is removed from the

ignition,

- when a door is opened,

- when the vehicle location function

is used.

Different lighting times are available:

- with the ignition off or on, approxi-

mately 10 minutes,

- in economy mode, approximately

30 seconds,

- when the engine is running, no

limit.

With the ignition on, press

the corresponding switch.

COURTESY LIGHTS

77

3. Rear courtesy light

Note: on the saloon, the front cour-

tesy light (in the "permanently on"

position) forces the switching on of

the rear courtesy light if the switch is

in the central position.

To switch off the rear courtesy light,

place the switch in the "permanently

off" position.

In this position, the courtesy

light comes on automati-

cally:

- when the vehicle is unlocked,

- when the key is removed from the

ignition,

- when a door is opened,

- when the vehicle location function

is used.

Permanently off.

Permanently on when the

ignition is on (function not

available in economy mode).

It switches off gradually:

- when the vehicle is locked,

- when the ignition is switched on,

- with the ignition off, 30 seconds

after the last door is closed.

4. Rear reading lights (estate)

The reading light comes on:

- when the vehicle is unlocked,

- when the key is removed from the

ignition,

- when a door is opened,

- when the vehicle location function

is used.

It switches off gradually:

- when the vehicle is locked,

- when the ignition is switched on,

- with the ignition off, 30 seconds

after the last door is closed.

With the ignition on (function not avail-

able in economy mode), press the

switch to obtain permanent lighting.

Press the switch again to switch the

reading light off.

78

With the ignition on, the mirror is

automatically lit up when the flap is

opened.

The front courtesy light and a spec-

tacles holder are fitted in the roof

console.

To open or close the spectacles holder,

press the recess in the cover.

The athermic windscreen has

two non-reflective zones located

either side of the base of the interior

mirror.

They are intended for affixing toll

cards and/or car park tickets.

SUN VISOR WITH ILLUMINATED

COURTESY MIRROR

THE ROOF CONSOLE

AREAS FOR TOLL CARDS/

CAR PARK TICKETS

79

INTERIOR LAYOUT

2. Front ashtray

Pull the lid to open the ashtray.

To empty it after opening, press the

tab and remove the ashtray.

3. Storage

4. 12 volt socket (100 W max)

This is a lighter type socket, fitted

with a cap. It is supplied with current

from the running position.

5. Door tray

6. Storage/Can holder

7. Coin storage

8. Waste container

To empty this, open it fully (past the

point of resistance) then pull on the

receptacle to remove it.

To refit, lock it in place on the cover.

It contains three sockets*

B for con-

necting video equipment.

The layout allows storage of a water

bottle, a pen, the vehicle handbook,

a pair of spectacles, tokens, etc.

* With colour screen only.

1. Glove box with cooling facility

This is fitted with a lock.

To open the glove box, lift the handle.

The glove box lights when the lid is

opened.

It has a ventilation nozzle that can

be closed

A, distributing the same

cooled air as the vents of the pas-

senger compartment.

80

When fitting the mat for the first time,

use only the fixings supplied in the

wallet attached.

When removing the mat on the driv-

er’s side:

- push the seat as far back as

possible,

- unscrew the fixings fully,

- remove the fixings, then the mat.

FITTING/REMOVING THE MAT

When refitting, position the

mat correctly and replace the

fixings by pressing them in.

Ensure that the mat is

secured correctly.

To prevent the mat from becoming

caught under the pedals:

- only use mats which are suited to

the fixings already present in the

vehicle. It is imperative that these

fixings are used.

- never fit one mat on top of another.



Lower the armrest to access the

storage shelf on the seat back.



Lift the lid. It contains a storage

tray as well as two can holders

and two pen holders.

REAR ARMREST

(SALOON AND ESTATE)

81

For further details, refer to the

operating manuals "Video kit

operation" and "VMA8582

7 inch LCD colour monitor".

ENTERTAINMENT SCREEN

KIT

This video assembly will enable the

rear passengers to pass the time

pleasantly while watching their fa-

vourite film or playing their favourite

game, by means, in particular, of the

connection of a DVD player or games

console to the central support, fitted

between the front seats.

The entertainment screen kit con-

sists of:

- a 16/9ths, 7 inch, LCD colour moni-

tor with direction adjustment in the

three axes,

- two high frequency, wireless, stereo

headphones,

- a removable support,

- three audio/video sockets on the

fixed base and in the glove com-

partment.

The monitor and the support can be

removed and stored, each in their

own protective cover.

The entertainment screen kit accepts

all types of audio/video source, PAL/

NTSC compatible, such as: DVD

player, camcorder, games console, ...

These sources are connected to the

three audio/video sockets,

AV1 in the

glove compartment or

AV2 on the

fixed base.

82

83

1. Rear parcel shelf

To remove the shelf:

- unhook the two strings,

- slightly raise the shelf, then remove

it.

The shelf can be stored:

- either behind the front seats,

- or behind the rear seat.

2. Hooks

3. Stowing rings

4. Luggage retaining net

Hooked onto the stowing rings, this

enables your luggage to be secured.

5. Open storage trays

6. 12 volt socket (100 W max)

This is a lighter type socket, installed

on the left-hand side of the parcel

shelf.

It is supplied from the "Running"

position.

BOOT LAYOUT (SALOON)

84

85

BOOT LAYOUT (ESTATE)

4. Boot floor and pillar stowing

rings

5. Rear seat stowing rings

6. Luggage retaining net

Secure the net hooks in the stowing

rings on the floor or on the folded

rear seat (two horizontal positions)

or secure the net hooks in the stow-

ing rings on the boot pillars and in the

floor rings at the rear of the boot (one

vertical position).

7. 12 volt socket (100 W max)

This is a lighter type socket, installed

on the load space cover left support.

It is supplied from the "Running" po-

sition.

8. High load retaining net fixings

The high load retaining net can be

installed behind the front or rear

seats.

Open the covers of the correspond-

ing upper fixings.

Fit the ends of the metal bar in these

fixings.

To install the high load retaining net:

- behind the front seats, lift the rear

seat cushion, hook the net straps

on the fixings then fold the rear

seat;

- behind the rear seat, hook the net

straps in the stowing rings on the

floor.

The rings are located directly below

the corresponding upper fixings.

Pull the two straps taut.

9. Grab handles and coat hooks

1. Load space cover

To install it:

- position the front ends of the cover

on its support and press gently to

put it in place,

- unfold the cover fully,

- position the rear ends of the cover

on its support and press gently to

put it in place.

To remove it:

- unclip the rear ends,

- fold the cover fully,

- unclip the front ends and remove

the cover.

To store it, slide it under the rear

seats (location

A).

2. Floor storage trays (2/3 - 1/3)

3. Storage nets

One of them contains the luggage re-

taining net.

86

Press the button, the direction indica-

tors flash.

They can operate with the ignition

off.

Press one of the spokes of the

steering wheel.

Automatic lighting of hazard

warning lights*

When braking in an emergency,

depending on the deceleration, the

hazard warning lights come on auto-

matically. They switch off automati-

cally the first time you accelerate.

It is also possible to switch them off

by pressing the button.

* According to country.

HORN

HAZARD WARNING LIGHTS