KIA Soul (2018 year). Manual — part 24

Driving your vehicle

1. Cruise indicator
2. Cruise set indicator

The cruise control system allows you
to program the vehicle to maintain a
constant speed without pressing the
accelerator pedal.
This system is designed to function
above approximately 20 mph (30
km/h).

• If the cruise control is left on

(CRUISE indicator light in the
instrument cluster illuminated), the
cruise control can be switched on
accidentally. Keep the cruise con-
trol system off (CRUISE indicator
light OFF) when the cruise control
is not in use, to avoid inadvertently
setting a speed.

• Use the cruise control system only

when traveling on open highways
in good weather.

• Do not use the cruise control driv-

ing in heavy or varying traffic, or on
slippery (rainy, icy or snow-cov-
ered) or winding roads or over 6%
up-hill or down-hill roads.

✽

NOTICE

• During normal cruise control opera-

tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
The delay is normal.

• To activate cruise control, depress

the brake pedal at least once after
turning the ignition switch to the ON
position or starting the engine. This
is to check if the brake switch which
is important part to cancel cruise
control is in normal condition.

CRUISE CONTROL SYSTEM (IF EQUIPPED)

OPS053015

WARNING

- Misuse of

Cruise Control

Do not use cruise control if the
traffic situation does not allow
you to drive safely at a constant
speed and with sufficient dis-
tance to the vehicle in front.

6 63

Driving your vehicle

Cruise control switch

CRUISE : Turns cruise control sys-

tem on or off.

CANCEL: Cancels cruise control

operation.

RES+: Resumes or increases cruise

control speed.

SET-: Sets or decreases cruise con-

trol speed.

To set cruise control speed:

1. Press the CRUISE button on the

steering wheel to turn the system
on. The CRUISE indicator light in
the instrument cluster will illumi-
nate.

2. Accelerate to the desired speed,

which must be more than 20 mph
(30 km/h).

✽

NOTICE

- Manual transaxle

For manual transaxle vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.

3. Push the SET - switch, and

release it at the desired speed.
The SET indicator light in the
instrument cluster will illuminate.
Release the accelerator pedal at
the same time. The desired speed
will automatically be maintained.

On a steep grade, the vehicle may
slow down or speed up slightly while
going uphill or downhill.

OPS053016

OPS053017

OPS053018

Driving your vehicle

To increase cruise control set
speed:

Follow either of these procedures:
• Push the RES + switch and hold it.

Your vehicle will accelerate.
Release the lever at the speed you
want.

• Push the RES + switch and

release it immediately.
The cruising speed will increase by
1 mph (or 2km/h) each time you
move the lever up (to RES+) in this
manner.

To decrease the cruising
speed:

Follow either of these procedures:
• Push the SET - switch and hold it.

Your vehicle will gradually slow
down. Release the lever at the
speed you want to maintain.

• Push the SET - switch and release

it immediately.
The cruising speed will decrease
by 1 mph (2 km/h) each time you
move the lever down (to SET-) in
this manner.

To temporarily accelerate with
the cruise control on:

If you want to speed up temporarily
when the cruise control is on,
depress the accelerator pedal.
Increased speed will not interfere
with cruise control operation or
change the set speed.
To return to the set speed, take your
foot off the accelerator.

OPS053019

OPS053018

6 65

Driving your vehicle

To cancel cruise control, do
one of the following:

• Press the brake pedal.
• Depress the clutch pedal if

equipped with a manual transaxle.

• Shift into N (Neutral) with an auto-

matic transaxle.

• Push the CANCEL switch located

on the steering wheel.

• Decrease the vehicle speed lower

than the memory speed by approx-
imately 12mph(20km/h).

• Decrease the vehicle speed to less

than approximately 15 mph (25
km/h).

Each of these actions will cancel
cruise control operation (the SET
indicator light in the instrument clus-
ter will go off), but it will not turn the
system off. If you wish to resume
cruise control operation, push the
RES + switch located on your steer-
ing wheel. You will return to your pre-
viously preset speed.

To resume cruising speed at
more than approximately 20
mph (30 km/h):

If any method other than the
CRUISE button was used to cancel
cruising speed and the system is still
activated, the most recent set speed
will automatically resume when the
RES + switch is pushed.
It will not resume, however, if the
vehicle speed has dropped below
approximately 20 mph (30 km/h).

OPS053020

OPS053019

Driving your vehicle

To turn cruise control off, do
one of the following:

• Press the CRUISE button (the

CRUISE indicator light in the
instrument cluster will go off).

• Turn the ignition off.
Both of these actions cancel cruise
control operation. If you want to
resume cruise control operation,
repeat the steps provided in “To set
cruise control speed” on the previous
page.

OPS053017

6 67

Driving your vehicle

➀

Cruise indicator

➁

Set speed

➂

Vehicle-to-vehicle distance

The SCC allows you to program the
vehicle to maintain a set speed so
long as it is not limited by traffic. When
traffic is encountered the vehicle will
slow down to maintain a set distance
behind traffic without depressing the
accelerator or brake pedal.

• Use the SCC only when traveling

on open highways in good weather.

• Limited visibility (rain, snow, smog,

etc)

• Cruise function should not be used

when the vehicle is being towed to
prevent any damage.

❈

SCC is the abbreviation for Smart
Cruise Control.

SMART CRUISE CONTROL SYSTEM (SCC) (IF EQUIPPED)

WARNING

- Smart Cruise Control

Inadvertent Activation

If the smart cruise control is left
on (CRUISE indicator in the
instrument cluster illuminated),
it can be activated inadvertent-
ly. Keep the advanced smart
cruise control system off
(CRUISE indicator turn off)
when the smart cruise control is
not in use to avoid setting a
speed which the driver is not
aware of.

OPS057119N

WARNING

The Smart Cruise Control
System (SCC) is deactivated
when driving under the speed
of 6.0 mph (10 km/h). In this
case, the SCC will be unable to
maintain the distance entered
by the driver. It is the driver's
responsibility to depress the
brake to maintain a safe dis-
tance from the vehicle the driv-
er is approaching.

Driving your vehicle

(Continued)

- Slippery road with rain, ice,

or snow covered

- Abrupt curved road
- Steep hills
- Windy roads
- Off roads
- Rods under construction
- Rumble strip
- The sensing ability decreas-

es if the level of front and rear
vehicle is changed from the
factory.

• The smart cruise control sys-

tem cannot recognize a
stopped vehicle, pedestrians or
an oncoming vehicle. Always
look ahead cautiously to pre-
vent unexpected and sudden
situations from occurring.

• Use the smart cruise control

system only when traveling on
open highways in good weath-
er conditions.

(Continued)

WARNING

- Smart Cruise Control

Limitations

• The smart cruise control is a

supplemental system and is
not a substitute for safe driv-
ing practices. It is the respon-
sibility of the driver to always
check the speed and distance
to the vehicle ahead.

• Do not use the smart cruise

control when it may not be
safe to keep the car at a con-
stant speed. For instance.
-

Highway interchange and
tollgate

- Road surrounded by abnor-

mally multiple steel con-
structions (subway con-
struction, steel tunnel, etc)

- Parking lot
- Lanes beside guard rail on a

road

(Continued)

(Continued)
• When driving near crash barri-

ers

• When driving on a sharp curve
• When driving with limited view

(possibly due to bad weather,
such as fog, snow, rain or
sandstorm)

• Always pay attention to the

road and driving conditions to
prevent unexpected situations
from occurring even while the
SCC is operating.

6 69

Driving your vehicle

Speed setting (SCC)

To set cruise control speed:

1. Press the CRUISE button, to turn

the system on. The CRUISE indi-
cator in the instrument cluster will
illuminate.

2. Accelerate to the desired speed.

• 20 mph (30 km/h) ~ 110 mph

(180 km/h) : when there is no
vehicle in front

• 6 mph (10 km/h) ~ 110 mph (180

km/h) : when there is a vehicle in
front

3. Move the lever down (to SET-),

and release it at the desired
speed. The set speed and vehicle
to vehicle distance on the LDC
screen will illuminate.

4. Release the accelerator pedal.

The desired speed will automati-
cally be maintained.

If there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead.
On a steep grade, the vehicle may
slow down or speed up slightly while
going uphill or downhill.

To increase cruise control set
speed:

Follow either of these procedures:
• Move the lever up (to RES+), and

hold it. Your vehicle set speed will
increase by 5 mph (10 km/h).
Release the lever at the speed you
want.

• Move the lever up (to RES+), and

release it immediately. The cruising
speed will increase by 1 mph (1.0
km/h) each time you move the
lever up (to RES+) in this manner.

OPS053017

OPS053019

OPS053018

Driving your vehicle

• SCC will operate to a maximum

setting of 110 mph (180 km/h).
However all local speed limit laws
must be followed.

To decrease the cruise control
set speed:

Follow either of these procedures:
• Move the lever down (to SET-), and

hold it. Your vehicle set speed will
decrease by 5 mph (10 km/h).
Release the lever at the speed you
want.

• Move the lever down (to SET-), and

release it immediately. The cruising
speed will decrease by 1 mph (1.0
km/h) each time you move the lever
down (to SET-) in this manner.

• You can set the cruise control to any

speed above 20 mph (30 km/h).

To temporarily accelerate with the
cruise control on:

✽

NOTICE

Be careful when accelerating tem-
porarily, because the speed is not
regulated automatically at this time
even if there is a vehicle in front of
you.

CAUTION

When vehicle speed is under 10
km/h (6 mph), the Smart Cruise
Control is canceled. The driver
must adjust the vehicle speed
by depressing the accelerator r
brake pedal according to the
oad condition ahead and driving
condition.

CAUTION

Check the driving condition
before using the toggle switch.
Driving speed sharply increas-
es, when you push up and hold
the toggle switch.

OPS053018

6 71

Driving your vehicle

SCC will be temporarily canceled
when:

Cancelled manually

The smart cruise control is temporar-
ily canceled when the brake pedal is
depressed or the CANCEL button is
pressed. The speed and vehicle to
vehicle distance indicator on the
cluster will disappear and the
CRUISE indicator is illuminated con-
tinuously.

Cancelled automatically

• The driver's door is opened.
• The vehicle is shifted to N

(Neutral), R (Reverse) or P (Park).

• The EPB (Electronic Parking

Brake) is applied.

• The vehicle speed is over 120 mph

(190 km/h).

• The vehicle stops on a steep

incline.

• The ESC (Electronic Stability

Control), TCS (Traction Control
System) or ABS is operating.

• The ESC is turned off.
• The sensor or the cover is dirty or

blocked with foreign matter.

• The vehicle is stopped for a certain

period of time.

• The vehicle stops and goes repeat-

edly for a long period of time.

• The accelerator pedal is continu-

ously depressed for a long period
of time.

• The engine performance is abnor-

mal.

• The driver starts driving by pushing

the switch up (RES+)/down (SET-)
or depressing the accelerator
pedal, after the vehicle is stopped
by the Smart Cruise Control
System with no other vehicle
ahead.

• When the AEB (Autonomous

Emergency Braking) is operating

• When the engine speed is in dan-

gerous range

• The driver starts driving by pushing

the switch up (RES+)/down (SET-)
or depressing the accelerator
pedal, after stopping the vehicle
with a vehicle stopped far away in
front.

• The AEB is activated.
• The vehicle stops and goes repeat-

edly for a long period of time.

Each of these actions will cancel the
Smart Cruise Control operation.
The Set Speed and Vehicle-to-
Vehicle Distance on the LCD display
will go off.

OPS056120N

Driving your vehicle

In a condition the Smart Cruise
Control is cancelled automatically,
the Smart Cruise Control will not
resume even though the RES+ or
SET- switch is pushed.

✽

NOTICE

If the system is automatically can-
celled, the warning chime will sound
and a message (“Smart Cruise
Control canceled”) will appear for a
few seconds.
You must adjust the vehicle speed by
depressing the accelerator or brake
pedal according to the road condi-
tions ahead and driving condition.
Always check the road conditions.
Do not rely on the warning chime.

To resume cruise control set
speed:

If any method other than the CRUISE
button was used to cancel cruising
speed and the system is still activat-
ed, the cruising speed will automati-
cally resume when you move the
lever up/down (to RES+ or SET-).
If you move the lever up (to RES+),
the speed will resume to the recently
set speed. When the speed of the
vehicle is greater than or equal to 6
mph (10 km/h) but less than 20 mph
(30 km/h), the smart cruise control
system will be reset only when there
is a vehicle in front.

WARNING

- Following

Distance

• To avoid collisions, always be

aware of the selected speed
and vehicle to vehicle dis-
tance settings when activat-
ing your smart cruise control
system.

• Always maintain sufficient

braking distance and deceler-
ate your vehicle by applying
the brakes if necessary.

OPS053019

6 73

Driving your vehicle

To turn cruise control off:

Press the CRUISE button. (the
CRUISE indicator in the instrument
cluster will go off).

Vehicle to vehicle distance
setting (SCC)

To set vehicle to vehicle distance:

This function allows you to program
the vehicle to maintain relative dis-
tance to the vehicle ahead without
depressing the accelerator pedal or
brake pedal.

The vehicle to vehicle distance will
automatically activate when the SCC
is on.
Select the appropriate distance
according to road conditions and
vehicle speed.

Each time the button is pressed, the
vehicle to vehicle distance changes
as follows:

OPS053017

OPS056121N

Distance 4

Distance 3

Distance 2

Distance 1

Driving your vehicle

For example, if you drive at 56 mph
(90 km/h), the distance is maintained
as follows;

Distance 4 - approximately 172 feet

(52.5 m)

Distance 3 - approximately 130 feet

(40 m)

Distance 2 - approximately 106 feet

(32.5 m)

Distance 1 - approximately 82 feet

(25 m)

✽

NOTICE

The smart cruise control system
remember the last vehicle to vehicle
distance which the driver used in the
vehicle with AEB.

OPS057123N

OPS057125N

Distance 4

Distance 2

OPS057124N

Distance 3

OPS057122N

Distance 1

6 75

Driving your vehicle

• The vehicle will maintain the set

speed, when the lane ahead is clear.

• The vehicle will slow down or

speed up within selected speed to
maintain the selected distance,
when there is a vehicle ahead of
you in the lane. (A vehicle will
appear in front of your vehicle in
the LCD display only when there is
an actual vehicle in front of you)

• If the vehicle ahead speeds up,

your vehicle will travel at a steady
cruising speed after accelerating to
the selected speed.

• The warning chime sounds and

LCD display blinks if it is hard to
maintain the selected distance to
the vehicle ahead.

• If the warning chime sounds,

actively adjust the vehicle speed by
depressing the brake pedal
according to the road condition
ahead and driving condition.

• Even if the warning chime is not acti-

vated, always pay attention to the
driving conditions to prevent danger-
ous situations from occurring.

If the vehicle ahead (vehicle speed:
less than 20 mph (30 km/h)) moves to
the next lane, the warning chime will
sound and a message will appear.
If a vehicle enters into your lane mov-
ing less than the designated speed,
you can adjust your vehicle speed by
depressing the brake pedal.

Radar to detect distance to the
vehicle ahead

The sensor detects distance to the
vehicle ahead.
If the sensor is covered with dirt or
other foreign matter, the vehicle to
vehicle distance control may not
operate correctly.
Always keep the sensor clean.

OPS057133N

OPS056126N

Driving your vehicle

Radar check message

If the radar or cover is dirty or
obscured with foreign matter such as
snow, this message (“Smart Cruise
Control disabled temporarily”) will
appear and it will disappear after for
a while. In this case, the system may
not function temporarily, but it does
not indicate a malfunction of the
Smart Cruise Control System. Clean
the radar or cover by using a soft
cloth and it will operate normally.

SCC (Smart Cruise Control)
malfunction message

The message (“Check Smart Cruise
Control System”) will appear when
the vehicle to vehicle distance control
system is not functioning normally.
Take your vehicle to an authorized
Kia dealer and have the system
checked.

• Always keep the sensor and

bumper clean.

• Use only a genuine Kia sensor

cover for your vehicle.

• Do not install accessories around

the sensor and do not replace the
bumper by yourself. It may interfere
with the sensor performance.

• Impact damage to the sensor or

sensor area may cause the sensor
to move slightly off position and
result in the SCC not operating
correctly without any warning or
indicator from the cluster. If this
occurs, have your vehicle checked
by an authorized Kia dealer as
soon as possible.

• Do not apply license plate frame or

foreign objects such as a bumper
sticker or a bumper guard near the
radar sensor.

Doing so may

adversely affect the sensing per-
formance of the radar.

• Always keep the radar sensor and

lens cover clean and free of dirt
and debris.

• Use only a soft cloth to wash the

vehicle. Do not spray pressurized
water directly on the sensor or sen-
sor cover.

• Be careful not to apply unneces-

sary force on the radar sensor or
sensor cover. If the sensor is
forcibly moved out of proper align-
ment, the Smart Cruise Control
System may not operate correctly.
In this case, a warning message
may not be displayed. Have the
vehicle inspected by an authorized
Kia dealer.

• If the front bumper becomes dam-

aged in the area around the radar
sensor, the Smart Cruise Control
System may not operate properly.
Have the vehicle inspected by an
authorized Kia dealer.

CAUTION

- Sensor

Damage

To prevent sensor cover dam-
age from occurring, wash the
car with a soft cloth.

6 77

Driving your vehicle

• Use only genuine Kia parts to

repair or replace a damaged sen-
sor or sensor cover. Do not apply
paint to the sensor cover.

To adjust the sensitivity of
Smart Cruise Control

The sensitivity of vehicle speed when
following the front vehicle to maintain
the set distance can be adjusted. Go
to the User Settings Mode (Driving
Assist) and select SCC (Smart
Cruise Control). You may select one
of the three stages you prefer.
• Slow:

Vehicle speed following the front
vehicle to maintain the set distance
is slower than normal speed.

• Normal:

Vehicle speed following the front
vehicle to maintain the set distance
is normal

• Fast:

Vehicle speed following the front
vehicle to maintain the set distance
is faster than normal speed.

✽

NOTICE

The system remembers the last
selected mode.

To convert to cruise control
mode:

The driver may choose to only use
the cruise control mode (speed con-
trol function) by doing as follows:
1.Turn the SCC on (the cruise indi-

cator light will be on but the system
will not be activated).

2.Push the distance to distance

switch for more than 2 seconds.

3.Choose between “Smart cruise

control (SCC) mode” and “Cruise
control (CC) mode”.

WARNING

When using the cruise control
mode,

you must manually

assess the distance to other
vehicles as the system will not
automatically brake to slow
down for other vehicles.

Была ли эта страница вам полезна?

Да!Нет

8 посетителей считают эту страницу полезной.

KIA Soul (2018 year). Manual — part 24

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.