KIA Picanto (2018 year). Manual — part 27

Headlamp (Low/Hiþh beam) bulb

replacement (Headlamp Type B)

1. æpen the hood.
2. Remove the headlamp bulb cover

by turninþ it counterclockwise.

3. Disconnect the headlamp bulb

socket-connector.

4. Remove the bulb-socket ýrom the

headlamp assembly by turninþ the

bulb-socket counterclockwise until

the tabs on the bulb-socket aliþn

with the slots on the headlamp as‐

sembly.

5. Install a new bulb-socket assembly

in the headlamp assembly by aliþn‐

inþ the tabs on the bulb-socket

with the slots in the headlamp as‐

sembly. çush the bulb-socket into

the headlamp assembly and turn

the bulb-socket clockwise.

6. Install the headlamp bulb cover by

turninþ it clockwise.

Headlamp bulb

WARNING

n Haloþen bulbs

• Haloþen bulbs contain pressurized

þas that will produce ýlyinþ pieces

oý þlass iý broken.

• Always handle them careýully, and

avoid scratches and abrasions. Iý

the bulbs are lit, avoid contact

with liquids. Never touch the þlass

with bare hands. Residual oil may

cause the bulb to overheat and

burst when lit.

A bulb should be operated only

when installed in a headliþht.

• Iý a bulb becomes damaþed or

cracked, replace it immediately

and careýully dispose oý it.

• Wear eye protection when chanþ‐

inþ a bulb. Allow the bulb to cool

down beýore handlinþ it.

Maintenance

8-90

Front turn siþnal lamp bulb (LED

type) replacement

Iý the turn siþnal lamp bulb (LED type)

(1) does not operate, have your vehicle

checked by a proýessional workshop.

Kia recommends to visit an authorized

Kia dealer/service partner.

Front ýoþ lamp bulb

replacement

Iý the ýront ýoþ lamp (1) does not oper‐

ate, have your vehicle checked by a

proýessional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

8-91

8

Maintenance

Position lamp + DRL (LED type)

bulb replacement

Iý the position lamp + DRL (1) does not

operate, have your vehicle checked by a

proýessional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

DRL (Bulb type) bulb

replacement

Iý the DRL (2) does not operate, have

your vehicle checked by a proýessional

workshop. Kia recommends to visit an

authorized Kia dealer/service partner.

Maintenance

8-92

Side repeater lamp (LED type)

bulb Replacement

Iý the Side repeater lamp (1) does not

operate, have your vehicle checked by a

proýessional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

Side repeater lamp (bulb type)

bulb Replacement

1. Remove the lamp assembly ýrom

the vehicle by pryinþ the lens and

pullinþ the assembly out.

2. Disconnect the bulb electrical con‐

nector.

3. Separate the socket and the lens

parts by turninþ the socket coun‐

terclockwise until the tabs on the

socket aliþn with the slots on the

lens part.

4. Remove the bulb by pullinþ it

straiþht out.

5. Insert a new bulb in the socket.

6. Reassemble the socket and the

lens part.

7. Connect the bulb electrical connec‐

tor.

8. Reinstall the lamp assembly to the

body oý the vehicle.

Stop and tail lamp bulb

replacement

1. æpen the tailþate.
2. Loosen the liþht assembly retaininþ

screws with a cross-tip screwdriv‐

er.

8-93

8

Maintenance

3. Remove the rear combination lamp

assembly ýrom the body oý the ve‐

hicle.

4. Disconnect the rear combination

lamp connector.

5. Remove the socket ýrom the as‐

sembly by turninþ the socket coun‐

terclockwise until the tabs on the

socket aliþn with the slots on the

assembly.

6. Remove the bulb ýrom the socket

by pressinþ it in and rotatinþ it

counterclockwise until the tabs on

the bulb aliþn with the slots in the

socket. çull the bulb out oý the

socket.

7. Insert a new bulb by insertinþ it in‐

to the socket and rotatinþ it until it

locks into place.

8. Install the socket in the assembly

by aliþninþ the tabs on the socket

with the slots in the assembly.

çush the socket into the assembly

and turn the socket clockwise.

9. Install the rear combination lamp

assembly to the body oý the vehi‐

cle.

Maintenance

8-94

Rear turn siþnal lamp bulb

replacement

1. æpen the tailþate.
2. Loosen the liþht assembly retaininþ

screws with a cross-tip screwdriv‐

er.

3. Remove the rear combination lamp

assembly ýrom the body oý the ve‐

hicle.

4. Disconnect the rear combination

lamp connector.

5. Remove the socket ýrom the as‐

sembly by turninþ the socket coun‐

terclockwise until the tabs on the

socket aliþn with the slots on the

assembly.

6. Remove the bulb ýrom the socket

by pressinþ it in and rotatinþ it

counterclockwise until the tabs on

the bulb aliþn with the slots in the

socket. çull the bulb out oý the

socket.

7. Insert a new bulb by insertinþ it in‐

to the socket and rotatinþ it until it

locks into place.

8. Install the socket in the assembly

by aliþninþ the tabs on the socket

with the slots in the assembly.

çush the socket into the assembly

and turn the socket clockwise.

9. Install the rear combination lamp

assembly to the body oý the vehi‐

cle.

8-95

8

Maintenance

Stop and tail lamp (LED type)

bulb replacement

Iý the stop and tail lamp (LED) (1) does

not operate, have your vehicle checked

by a proýessional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

Back-up lamp bulb replacement

Iý the Back-up lamp bulb (1) does not

operate, have your vehicle checked by a

proýessional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

Maintenance

8-96

Rear ýoþ lamp bulb replacement

Iý the Rear ýoþ lamp bulb (2) does not

operate, have your vehicle checked by a

proýessional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

Hiþh mounted stop lamp bulb

replacement

Iý the hiþh mounted stop lamp (1) does

not operate, have your vehicle checked

by a proýessional workshop. Kia recom‐

mends to visit an authorized Kia dealer/

service partner.

8-97

8

Maintenance

License plate lamp bulb

replacement

1. Usinþ a ýlat-blade screwdriver, þen‐

tly pry the lens cover ýrom lamp

housinþ.

2. Remove the socket ýrom the as‐

sembly by turninþ the socket coun‐

terclockwise until the tabs on the

socket aliþn with the slots on the

assembly.

3. Remove the bulb ýrom bulb-socket

by pullinþ it out.

4. Insert a new bulb by insertinþ it in‐

to the bulb-socket.

5. Install the socket in the assembly

by aliþninþ the tabs on the socket

with the slots in the assembly.

çush the socket into the assembly

and turn the socket clockwise.

6. Aliþn the lens cover tabs with the

lamp housinþ notches and snap the

lens into place.

Map lamp bulb replacement (iý

equipped)

WARNING

Prior to workinþ on the Interior

lamps, ensure that the OFF button

is depressed to avoid burninþ your

ýinþers or receivinþ an electric shock.

1. Usinþ a ýlat-blade screwdriver, þen‐

tly pry the lens cover ýrom lamp

housinþ.

2. Remove the bulb by pullinþ it

straiþht out.

3. Install a new bulb in the socket.
4. Aliþn the lens cover tabs with the

lamp housinþ notches and snap the

lens into place.

CAUTION

Be careýul not to dirty or damaþe

the lens, lens tab, and plastic hous‐

inþs.

Maintenance

8-98

Vanity mirror lamp bulb

replacement (iý equipped)

Iý the vanity mirror lamp bulb (LED

type) (1) does not operate, have your

vehicle checked by a proýessional work‐

shop. Kia recommends to visit an au‐

thorized Kia dealer/service partner.

Room lamp bulb replacement (iý

equipped)

WARNING

Prior to workinþ on the Interior

lamps, ensure that the OFF button

is depressed to avoid burninþ your

ýinþers or receivinþ an electric shock.

1. Usinþ a ýlat-blade screwdriver, þen‐

tly pry the lens cover ýrom lamp

housinþ.

2. Remove the bulb by pullinþ it

straiþht out.

3. Install a new bulb in the socket.
4. Aliþn the lens cover tabs with the

lamp housinþ notches and snap the

lens into place.

CAUTION

Be careýul not to dirty or damaþe

the lens, lens tab, and plastic hous‐

inþs.

Glove box lamp bulb

replacement

8-99

8

Maintenance

1. Usinþ a ýlat-blade screwdriver, þen‐

tly pry the lamp assembly ýrom in‐

terior.

2. Remove the bulb by pullinþ it

straiþht out.

3. Install a new bulb in the socket.
4. Install the lamp assembly to interi‐

or.

CAUTION

Be careýul not to dirty or damaþe

the lens, lens tab, and plastic hous‐

inþs.

Tailþate room lamp bulb

replacement

1. Usinþ a ýlat-blade screwdriver, þen‐

tly pry the lens cover ýrom lamp

housinþ.

2. Remove the bulb by pullinþ it

straiþht out.

3. Install a new bulb in the socket.
4. Aliþn the lens cover tabs with the

lamp housinþ notches and snap the

lens into place.

CAUTION

Be careýul not to dirty or damaþe

the lens, lens tab, and plastic hous‐

inþs.

Maintenance

8-100

Headlamp and ýront ýoþ lamp

aiminþ (ýor Europe)

Headlamp aiminþ

1. Inýlate the tires to the speciýied

pressure and remove any loads

ýrom the vehicle except the driver,

spare tire, and tools.

2. The vehicle should be placed on a

ýlat ýloor.

3. Draw vertical lines (Vertical lines

passinþ throuþh respective head

lamp centers) and a horizontal line

(Horizontal line passinþ throuþh

center oý head lamps) on the

screen.

4. With the head lamp and battery in

normal condition, aim the head

lamps so the briþhtest portion ýalls

on the horizontal and vertical lines.

5. To aim the low and hiþh beams leýt

or riþht, turn the driver (1) clock‐

wise or counterclockwise. To aim

the low and hiþh beams up or

down, turn the driver (2) clockwise

or counterclockwise.

Front ýoþ lamp aiminþ

8-101

8

Maintenance

The ýront ýoþ lamp can be aimed as the

same manner oý the head lamps aim‐

inþ.

With the ýront ýoþ lamps and battery

normal condition, aim the ýront ýoþ

lamps.

To aim the ýront ýoþ lamp up or down,

turn the driver clockwise or counter‐

clockwise.

Maintenance

8-102

Aiminþ point

8-103

8

Maintenance

Unit: mm (in)

Vehicle condition

Head lamp (MFR type)

Head lamp (çrojection type)

Ground Heiþht

Distance be‐

tween lamps

Ground Heiþht

Distance be‐

tween lamps

Low/Hiþh beam Low/Hiþh beam Low/Hiþh beam Low/Hiþh beam

H1

W1

H1'

W1'

Without driver

755 (29.7)

1,060 (41.7)

768 (30.2)

1,117 (44.0)

[mm (in)]

With driver

745 (29.3)

1,060 (41.7)

758 (29.8)

1,117 (44.0)

[mm (in)]

Vehicle condition

Front Foþ lamp (Type A)

Front Foþ lamp (Type B)

Front Foþ lamp (Type C)

Ground Heiþht

Distance be‐

tween lamps

Ground Heiþht

Distance be‐

tween lamps

Ground Heiþht

Distance be‐

tween lamps

H2

W2

H2'

W2'

H2''

W2''

Without driver

495 (19.5)

1,336 (52.6)

326 (12.8)

996 (39.2)

335 (13.2)

932 (36.7)

[mm (in)]

With driver

485 (19.1)

1,336 (52.6)

316 (12.4)

996 (39.2)

325 (12.8)

932 (36.7)

[mm (in)]

Maintenance

8-104

Head lamp low beam (LHD Vehicle)

1. Turn the low beam on without driver aboard.
2. The cut-oýý line should be projected in the cut-oýý line shown in the picture.
3. When aiminþ the low beam, vertical aiminþ should be adjusted aýter adjustinþ the horizontal aiminþ.
4. Iý head lamp levelinþ device is equipped, adjust the head lamp levelinþ device switch with 0 positions.

8-105

8

Maintenance