Acura RDX (2019 year). Instruction — part 6
85
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Vehicle Stability
Assist® (VSA®)
System
Indicator
●
Blinks when VSA®, or trailer stability
assist is active.
●
Comes on if there is a problem with
the brake assist system, VSA®
system or hill start assist system.
●
Stays on constantly - Have your vehicle
checked by a dealer.
2 Vehicle Stability Assist® (VSA®), aka
Electronic Stability Control (ESC),
System P. 434
Vehicle Stability
Assist® (VSA®)
OFF Indicator
●
Comes on when you partially
disable VSA®.
2 VSA® On and Off P. 435
19 ACURA RDX-31TJB6000.book 85 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
86
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Low Tire
Pressure/TPMS
Indicator
●
Comes on if the tire pressure of any
of the tires becomes significantly
low.
●
Blinks for about one minute, and
then stays on if there is a problem
with the TPMS, or when a compact
spare tire
*
is temporarily installed.
●
Comes on while driving - Stop in a safe
place, check tire pressures, and inflate the
tire(s) if necessary.
●
Blinks and remains on - Have your
vehicle checked by a dealer. If the vehicle
is fitted with a compact spare tire, get your
regular tire repaired or replaced and put
back on your vehicle as soon as you can.
* Not available on all models
19 ACURA RDX-31TJB6000.book 86 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
87
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Turn Signal and
Hazard
Warning
Indicators
• Blinks when you operate the turn
signal lever.
• Blink along with all turn signals
when you press the hazard warning
button.
• Does not blink or blinks rapidly
2 Replacing Light Bulbs P. 545
—
High Beam
Indicator
• Comes on when the high beam
headlights are on.
—
—
Lights On
Indicator
• Comes on when the light switch in
a position other than OFF or when
the switch is set to AUTO and the
exterior lights come on.
• If you set the power mode to VEHICLE OFF
while the lights are on, a chime sounds
when the driver’s door is opened.
—
Fog Light
Indicator
*
• Comes on when the fog lights are
on.
—
—
Auto High-
Beam Indicator
• Comes on when all the operating
conditions of the auto high-beam
are met.
2 Auto High-Beam P. 191
—
* Not available on all models
19 ACURA RDX-31TJB6000.book 87 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
88
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Canadian models only: Apply and hold the brake pedal before selecting the ON mode.
Indicator
Name
On/Blinking
Explanation
Message
*1
Immobilizer
System
Indicator
• Comes on briefly when you set the
power mode to ON, then goes off.
• Blinks if the immobilizer system
cannot recognize the key
information.
• Blinks - You cannot start the engine. Set
the power mode to VEHICLE OFF
*1
, then
select the ON mode again.
• Repeatedly blinks - The system may be
malfunctioning. Have your vehicle
checked by a dealer.
• Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
Security System
Alarm Indicator
• Comes on briefly when you set the
power mode to ON, then goes off.
• Blinks when the security system
alarm has been set.
2 Security System Alarm P. 173
—
Indicator
Indicator
19 ACURA RDX-31TJB6000.book 88 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
89
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
System
Message
Indicator
• Comes on along with a beep when
a problem is detected. A system
message on the multi-information
display appears at the same time.
• While the indicator is on, roll the right
selector wheel to see the message again.
2 Switching the Display P. 129
• Refer to the Indicators information in this
chapter when a system message appears
on the multi-information display. Take the
appropriate action for the message.
• The multi-information display does not
return to the normal screen unless the
warning is canceled, or the right selector
wheel is pressed.
—
19 ACURA RDX-31TJB6000.book 89 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
90
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Super
Handling-All
Wheel Drive
TM
(SH-AWD®)
Indicator
*
●
Comes on if there is a problem with
the SH-AWD® system.
●
Blinks when the differential
temperature is too high.
●
Stays on constantly - The engine drives
the front wheels only in this state. Have
your vehicle checked by a dealer.
●
Blinks while driving - Stop in a safe
place, put the transmission into
(
P, and
idle the engine until the indicator goes off.
If the indicator does not stop blinking,
take your vehicle to a dealer.
2 Super Handling-All Wheel Drive
P. 437
Maintenance
Minder
Indicator
●
Comes on when the scheduled
maintenance is due soon.
●
Consequently, Maintenance Due
Now and Maintenance Past Due
follow.
P. 525
* Not available on all models
19 ACURA RDX-31TJB6000.book 90 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
91
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Adaptive
Cruise Control
(ACC) with Low
Speed Follow
(LSF) Indicator
(Amber)
●
Comes on if there is a problem with
ACC with LSF.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
●
ACC with LSF has been
automatically canceled.
●
Make sure the total load is within the
Maximum Load Limit.
●
Stays on constantly - Have your vehicle
checked by a dealer.
Adaptive
Cruise Control
(ACC) with Low
Speed Follow
(LSF) Indicator
(Green)
●
Comes on when you press the
MAIN button.
2 Adaptive Cruise Control (ACC) with
—
Lane Keeping
Assist System
(LKAS)
Indicator
(Amber)
●
Comes on if there is a problem with
the LKAS.
●
Stays on constantly - Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
(LKAS)
Indicator
(Green)
●
Comes on when you press the
MAIN button.
2 Lane Keeping Assist System (LKAS)
P. 471
—
19 ACURA RDX-31TJB6000.book 91 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
92
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Road
Departure
Mitigation
(RDM) Indicator
●
Comes on if there is a problem with
RDM.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
●
Make sure the total load is within the
Maximum Load Limit.
2 Maximum Load Limit P. 401
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Comes on when RDM shuts itself
off.
●
Indicator may come on temporarily when
passing through an enclosed space, such
as tunnel.
●
The area around the radar sensor is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
●
Have your vehicle checked by a dealer if
the indicator does not go off even after
you have cleaned the radar sensor.
2 Radar Sensor P. 485
●
Stays on - The temperature inside the
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the
temperature inside the camera cools
down.
19 ACURA RDX-31TJB6000.book 92 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
93
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Road
Departure
Mitigation
(RDM) Indicator
●
Comes on when RDM shuts itself
off.
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
●
Have your vehicle checked by a dealer if
the indicator and message are still
displayed even after you have cleaned the
area around the camera.
2 Front Sensor Camera P. 483
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
●
Comes on when you deactivate the
CMBS
TM
. A multi-information
display message appears for five
seconds.
●
Comes on if there is a problem with
CMBS
TM
.
●
Stays on constantly without the
CMBS
TM
OFF - Have your vehicle checked
by a dealer.
●
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
●
Make sure the total load is within the
Maximum Load Limit.
●
Stays on constantly - Have your vehicle
checked by a dealer.
19 ACURA RDX-31TJB6000.book 93 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
94
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
●
Comes on when CMBS
TM
shuts itself
off.
●
Indicator may come on temporarily when
passing through an enclosed space, such
as tunnel.
●
The area around the radar sensor is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
●
Have your vehicle checked by a dealer if
the indicator does not go off even after
you have cleaned the radar sensor.
2 Radar Sensor P. 485
●
Stays on - The temperature inside the
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the
temperature inside the camera cools
down.
19 ACURA RDX-31TJB6000.book 94 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
95
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Collision
Mitigation
Braking
System
TM
(CMBS
TM
)
Indicator
●
Comes on when CMBS
TM
shuts itself
off.
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
●
Have your vehicle checked by a dealer if
the indicator and message are still
displayed even after you have cleaned the
area around the camera.
2 Front Sensor Camera P. 483
Blind spot
information
System
Indicator
*
●
Stays on while BSI is turned off.
2 Customized Features P. 332
* Not available on all models
19 ACURA RDX-31TJB6000.book 95 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
96
uu
Indicators
u
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Blind spot
information
System
Indicator
*
●
Comes on when mud, snow, or ice
accumulates in the vicinity of
sensor.
●
Comes on while driving - Remove the
obstacle in the vicinity of sensor.
2 Blind spot information System
P. 438
●
Comes on if there is a problem with
the system.
●
Comes on while driving - Have your
vehicle checked by a dealer.
U.S.
Canada
U.S.
Canada
* Not available on all models
19 ACURA RDX-31TJB6000.book 96 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
97
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Multi-Information Display Warning and Information Messages
The following messages appear only on the multi-information display. Roll the right selector wheel to see the message again with the
system message indicator on.
2 Switching the Display P. 129
Message
Condition
Explanation
●
Appears when the vehicle is no longer able to run
due to a malfunction.
●
Immediately stop in a safe place.
●
Appears when there is a risk that the vehicle will
move unexpectedly after you have stopped due to a
malfunction with the vehicle.
●
While the vehicle is stopped, apply the parking brake.
●
Have your vehicle checked by a dealer.
●
Appears when you set the power mode to ON again
and the vehicle is able to run.
●
Appears when the engine stops without the
transmission in
(
P, and does not restart
automatically.
●
Appears if you open the bonnet while Auto Idle Stop
activates.
●
If you want to set the power mode to ON, put the
transmission into
(
P.
●
If you want to start the engine, follow the normal
procedure.
19 ACURA RDX-31TJB6000.book 97 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
98
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the washer fluid is low.
●
Refill the washer fluid.
2 Refilling Window Washer Fluid P. 544
• Appears if there is a problem with the cooling
system.
• Drive slowly to prevent overheating and have your
vehicle checked by a dealer as soon as possible.
Canadian models
19 ACURA RDX-31TJB6000.book 98 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
99
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the starter system has a problem.
●
As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while
pressing the brake pedal, manually start the engine.
Have your vehicle checked by a dealer.
U.S.
Canada
19 ACURA RDX-31TJB6000.book 99 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
100
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the engine oil pressure is low.
• Appears while driving - Immediately stop in a safe
place.
2 If the Low Oil Pressure Warning Appears P. 608
●
Appears when the engine coolant temperature gets
abnormally high.
2 Overheating P. 606
19 ACURA RDX-31TJB6000.book 100 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст