Acura RDX (2019 year). Instruction — part 7
101
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when there is a problem with the power
tailgate system.
• Instructionly open or close the power tailgate.
• Have the vehicle checked by a dealer.
• Appears if any door or the tailgate is not completely
closed.
• Appears if any door or the tailgate is opened while
driving. The beeper sounds.
• Disappears when all doors and the tailgate are closed.
U.S.
Canada
19 ACURA RDX-31TJB6000.book 101 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
102
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the automatic
lighting control system.
• Appears while driving - Instructionly turn the lights on,
and have your vehicle checked by a dealer.
• Appears if there is a problem with the headlights.
• Appears while driving - The headlights may not be
on. When conditions allow you to drive safety, have
your vehicle checked by a dealer as soon as possible.
●
Appears when there is a problem with the sensor on
the battery.
●
Have your vehicle checked by a dealer.
●
Appears along with the battery charging system
indicator when the battery is not charging.
●
Turn off the climate control system and rear defogger to
reduce electricity consumption.
2 If the Charging System Indicator Comes On P. 609
●
Appears if the dynamic mode cannot be changed
due to certain situations, such as a system error or
adverse driving conditions.
2 Integrated Dynamics System P. 426
19 ACURA RDX-31TJB6000.book 102 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
103
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the automatic brake hold system is
turned off.
●
Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
●
Fasten the driver’s seat belt.
●
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
●
Press the automatic brake hold button with the brake
pedal depressed.
●
Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 491
2 Parking Brake P. 486
19 ACURA RDX-31TJB6000.book 103 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
104
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if the automatic brake hold is automatically
canceled while it is in operation.
●
Immediately depress the brake pedal.
●
Appears when the electric parking brake switch is
pulled without depressing the brake pedal while the
electric parking brake is in operation.
●
Pull the electric parking brake switch with the brake
pedal depressed.
2 Parking Brake P. 486
19 ACURA RDX-31TJB6000.book 104 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
105
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears as soon as a problem is detected in the
keyless access system or push button starting system.
●
Appears constantly - Have your vehicle checked by a
dealer.
●
Appears when you close the door with the power
mode in ON without the keyless access remote inside
the vehicle.
●
Disappears when you bring the keyless access remote
back inside the vehicle and close the door.
2 Keyless Access Remote Reminder P. 184
●
Appears when the keyless access remote battery
becomes weak.
2 Replacing the Button Battery P. 565
19 ACURA RDX-31TJB6000.book 105 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
106
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears after you set the power mode to
ACCESSORY or ON.
• Appears when the engine does not restart
automatically due to the following reasons:
- The hood is open.
- There is a problem in the system that disables Auto
Idle Stop.
●
Follow the normal procedure to start the engine.
●
Appears when the steering wheel is locked.
●
Move the steering wheel left and right while pressing the
ENGINE START/STOP button.
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Change the power mode to VEHICLE OFF.
2 ENGINE START/STOP Button P. 182
Canadian models
19 ACURA RDX-31TJB6000.book 106 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
107
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the power mode is in ACCESSORY.
—
●
Appears if the keyless access remote battery is too
weak to start the engine or the key is not within
operating range to start the engine.
A beeper sounds six times.
●
Bring the back of the keyless access remote into contact
with the ENGINE START/STOP button.
2 If the Keyless Access Remote Battery is Weak P. 602
19 ACURA RDX-31TJB6000.book 107 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
108
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if you press the ENGINE START/STOP
button while the vehicle is moving.
• The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Press and hold the ENGINE START/STOP button with
your foot off the brake pedal to change the power
mode to VEHICLE OFF.
●
Appears if you try to start the engine when the
transmission is in
(
N and the parking brake is
disengaged.
●
Put the transmission into
(
P, then start the engine in
the normal procedure.
2 Starting the Engine P. 411
19 ACURA RDX-31TJB6000.book 108 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
109
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you turn the Auto Idle Stop system
on.
2 Auto Idle Stop P. 428
• Appears when Auto Idle Stop Display On has
been selected from the customization menu.
2 Auto Idle Stop P. 428
• Appears when Auto Idle Stop does not activate for
some reason.
• Appears when the engine restarts automatically.
• Appears when the battery temperature is around
14°F (−10°C) or lower.
• Appears when Auto Idle Stop does not activate
because the climate control system is in use, and the
difference between the set temperature and actual
interior temperature becomes significant.
• Appears when Auto Idle Stop does not activate
because the engine coolant temperature is too low
or high.
• Appears when Auto Idle Stop does not activate
because the battery charge level is low.
• Appears when the battery is low performance.
19 ACURA RDX-31TJB6000.book 109 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
110
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the hood is opened.
●
Close the hood.
• Appears when Auto Idle Stop does not activate
because the pressure to the brake pedal is not
enough.
●
Depress the brake pedal firmly.
• Appears when Auto Engine Idle Stop Display On
has been selected from the customization menu.
• Appears when the system is under the following
conditions while Auto Idle Stop activates:
- The climate control system is in use, and the
difference between the set temperature and actual
interior temperature becomes significant.
- The humidity in the interior is high.
- The battery charge level is low.
●
The engine restarts automatically in a few seconds.
2 Starting the Engine P. 411
19 ACURA RDX-31TJB6000.book 110 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
111
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you try to change the gear position
without depressing the brake pedal.
• Depress the brake pedal, then select a shift button.
• Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.
• Release your foot off the accelerator pedal, then select
a shift button.
• Appears when you try to change the shift position
after the position has automatically been changed to
(
P with the driver’s door open and the driver’s seat
belt unfastened.
●
Press the
(
P button if you leave the vehicle.
U.S.
Canada
19 ACURA RDX-31TJB6000.book 111 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
112
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when the
(
P button is pressed while the
vehicle is moving.
• Appears if you put the transmission into
(
R while
the vehicle is moving forward, or into
(
D while the
vehicle is reversing.
• Make sure that the vehicle comes to a stop before
operating the select button.
• Appears when you set the power mode to OFF while
driving.
• Immediately stop in a safe place, set the parking brake,
then restart the engine. If the message disappears,
continue driving.
• Appears if the vehicle is stopped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.
• When the vehicle is idling or when you are parking or
exiting the vehicle, put the transmission into
(
P before
releasing the brake pedal.
2 Shift Operation P. 420
●
Appears when you attempt to change to another
gear position with the transmission in
(
P and the
engine OFF.
●
To select another gear position while in
(
P, the engine
must be ON.
19 ACURA RDX-31TJB6000.book 112 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
113
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you press the
(
P button but it is not
engaged due to low ATF temperature.
●
Depress the brake pedal until this message disappear.
• Appears when the temperature of the transmission
is starting to get too hot.
• The performance of the vehicle may be reduced.
• Until the message disappears, reduce your speed and
allow the system to cool down.
• Appears if you depress the accelerator pedal when
the transmission is in
(
N.
• Release the accelerator pedal. After that, depress the
brake pedal and change the transmission position.
19 ACURA RDX-31TJB6000.book 113 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
114
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears when you press and hold
(
N button for
more than two seconds.
• Disappears when you set the gear position to a gear
other than
(
N.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 422
• Appears for a few seconds if you have not pressed
the
(
N button long enough to initiate Neutral-Hold
mode.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 422
• Appears when you set the power mode to ON
without fastening the driver’s seat belt.
• Appears when you change the gear position after
(
P has been automatically selected with the driver’s
door open, the driver’s seat belt unfastened, then
the brake pedal is released.
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 420
19 ACURA RDX-31TJB6000.book 114 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
115
uu
Indicators
u
Multi-Information Display Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
• Appears if there is a problem with the auto high-
beam.
• Manually operate the headlight switch.
• If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
●
Appears when ACC with LSF has been automatically
canceled.
●
You can resume the set speed after the condition that
caused ACC with LSF to cancel improves. Press the
RES/+ button.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Flashes when the system senses a likely collision with
a vehicle in front of you.
●
Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2 Collision Mitigation Braking System
P. 446
2 Adaptive Cruise Control (ACC) with Low Speed
19 ACURA RDX-31TJB6000.book 115 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
116
uu
Indicators
u
Multi-Information Display Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when ACC with LSF is canceled due to
excessive high vehicle speed.
●
Reduce the speed, then reset ACC with LSF.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when the speed of the vehicle is too high for
you to set ACC with LSF.
●
Reduce the speed, then set ACC with LSF.
2 Adaptive Cruise Control (ACC) with Low Speed
19 ACURA RDX-31TJB6000.book 116 ページ 2018年4月26日 木曜日 午後4時51分
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст