Alfa Romeo 4C (2018 year). Manual — part 60
CAUTION!
(Continued)
service. Contact your authorized dealer for service
assistance.
•
The use of fuel additives, which are now being
sold as octane enhancers, is not recommended.
Most of these products contain high concentra-
tions of methanol. Fuel system damage or vehicle
performance problems resulting from the use of
such fuels or additives is not the responsibility of
the manufacturer and may void or not be covered
under the New Vehicle Limited Warranty.
NOTE:
Intentional tampering with the emissions con-
trol system can result in civil penalties being assessed
against you.
Carbon Monoxide Warnings
WARNING!
Carbon monoxide (CO) in exhaust gases is deadly.
Follow the precautions below to prevent carbon
monoxide poisoning:
•
Do not inhale exhaust gases. They contain carbon
monoxide, a colorless and odorless gas, which can
kill. Never run the engine in a closed area, such as
a garage, and never sit in a parked vehicle with
the engine running for an extended period. If the
vehicle is stopped in an open area with the engine
running for more than a short period, adjust the
ventilation system to force fresh, outside air into
the vehicle.
•
Guard
against
carbon
monoxide
with
proper
maintenance. Have the exhaust system inspected
every time the vehicle is raised. Have any abnor-
mal conditions repaired promptly. Until repaired,
drive with all side windows fully open.
9
TECHNICAL SPECIFICATIONS
251
FLUID CAPACITIES
U.S.
Metric
Fuel (Approximate)
1750 Turbo Engine
10.5 Gallons
40 Liters
Reserve Fuel
1.1 Gallons
4 Liters
Engine Oil with Filter
1750 Turbo Engine
6.1 Quarts
5.8 Liters
Cooling System
1750 Turbo Engine (Mopar
Antifreeze/Engine Coolant 10
Year/150,000 Mile Formula).
11.2 Quarts
10.6 Liters
252
TECHNICAL SPECIFICATIONS
FLUIDS AND LUBRICANTS
Engine
Component
Fluid, Lubricant, or Genuine Part
Engine Coolant – 1750 Turbo Engine
We recommend you use Mopar Antifreeze/Coolant 10
Year/150,000
Mile
Formula
OAT
(Organic Additive
Technology) or equivalent meeting the requirements of
FCA Material Standard MS.90032.
Engine Oil – 1750 Turbo Engine
We
recommend
you
use
SAE
5W-40 API
Certified
Synthetic Engine Oil, meeting the requirements of FCA
Material Standard MS-12991.
Engine Oil Filter – 1750 Turbo Engine
We recommend you use Mopar Engine Oil Filter.
Spark Plugs – 1750 Turbo Engine
We recommend you use Mopar Spark Plugs. *
Fuel Selection – 1750 Turbo Engine
Use Only 91 Octane or higher, 0-10% Ethanol.
NOTE:
*
The following are essential to ensure correct
operation and prevent serious damage to the engine: only
use spark plugs of the same make and type, which are
specially certified for such engines that strictly comply
with the spark plug replacement interval given in the
maintenance schedule. For spark plug replacement, it is
advisable to contact the dedicated Alfa Romeo Dealer-
ship. Refer to “Scheduled Servicing” in “Servicing And
Maintenance” for the required spark plug intervals.
9
TECHNICAL SPECIFICATIONS
253
Chassis
Component
Fluid, Lubricant, or Genuine Part
Alfa Twin Clutch Transmission
•
Gearbox: Full synthetic 75W-85 manual transmission fluid meeting
MS.90021 or FPW9.55550–MZ3 or the API GL4 specification.
•
Control System: Use only Mopar C Series DDCT SAE 75W Hydraulic
Fluid or equivalent.
Failure to use the correct fluid may affect the function or performance of
your transmission.
Brake Master Cylinder
We recommend you use Mopar DOT 4 meeting MS.90039. If DOT 4 brake
fluid is not available, then DOT 3 is acceptable.
DOT 4 brake fluid must be changed every two years regardless of mileage.
254
TECHNICAL SPECIFICATIONS
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст