RAM 3500 Chassis Cab (2019 year). Instruction — part 32

508 MULTIMEDIA

Clear Personal Data

After pressing the “Clear Personal Data Settings” button on the touchscreen, the following settings will be available:

System Information

After pressing the “System Information” button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Clear Personal Data

Yes

Cancel

NOTE:

When this feature is selected it will remove all personal data including Bluetooth devices and presets. If “Yes” is selected a

pop-up will appear asking "Are you sure you want to clear all personal data?” select “Yes” to Clear, or “Cancel” to exit.

Setting Name

Selectable Options

System Information

System Software Information Screen

NOTE:

When the “System Information” feature is selected, a “System Software Information” screen will appear, displaying the

system software version. You can also update your maps with a USB device. Please see an authorized dealer for further infor-

mation.

MULTIMEDIA

509

Uconnect 4/4C/4C NAV Settings

Uconnect 4/4C/4C NAV With 8.4–inch Display Buttons On

The Touchscreen And Buttons On The Faceplate

Press the “Apps” button on the touchscreen then press the

“Settings” button on the touchscreen to display the settings

menu screen. In this mode the Uconnect system allows you

to access programmable features that may be equipped such

as Language, Display, Units, Voice, Clock, Safety & Driving

Assistance, Mirrors & Wipers, Lights, Doors & Locks, Power

Side Steps (if equipped), Auto-On Comfort (if equipped),

Engine Off Options, Suspension, Trailer, Audio, Phone/

Bluetooth, SiriusXM Setup (if equipped), Restore Settings

and System Information.
NOTE:

Only one category may be selected at a time.
When making a selection, press the button on the touch-

screen to enter the desired mode. Once in the desired mode,

press and release the preferred setting until a check-mark

appears next to the setting, showing that setting has been

selected. Once the setting is complete, press the back arrow

button on the touchscreen to return to the previous menu or

press the “X” button on the touchscreen to close out of the

settings screen. Pressing the Up or Down Arrow buttons on

the touchscreen on the right side of the screen will allow you

to toggle up or down through the list of available settings.
NOTE:

All settings should be changed with the ignition in the RUN

position.

1 — Uconnect Buttons On The Touchscreen

2 — Uconnect Buttons On The Faceplate

9

510 MULTIMEDIA

Language

After pressing the “Language” button on the touchscreen, the following settings will be available:

Display

After pressing the “Display” button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Set Language

English

Français

Español

NOTE:

When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Español) for all

display nomenclature, including the trip functions and the navigation system (if equipped). Press the “Set Language” button

on the touchscreen, then press the desired language button on the touchscreen until a check-mark appears next to the

language, showing that setting has been selected.

Setting Name

Selectable Options

Display Mode

Auto

Instruction

NOTE:

When Day or Night is selected for the Display Mode, the usage of the Parade Mode feature will cause the radio to activate

the Display Brightness Day control even though the headlights are on.
Display Brightness With Headlights

ON

–

+

NOTE:

To make changes to the "Display Brightness with Headlights ON" setting, the headlights must be on and the interior dimmer

switch must not be in the "party" or "parade" positions.

MULTIMEDIA

511

Display Brightness With Headlights

OFF

–

+

NOTE:

To make changes to the "Display Brightness with Headlights OFF" setting, the headlights must be off and the interior dimmer

switch must not be in the "party" or "parade" positions.
Touchscreen Beep

On

Off

Controls Screen Time-Out — If

Equipped

On

Off

Fuel Saver Display in Cluster — If

Equipped

On

Off

NOTE:

When selected, the system displays fuel saver mode in the instrument cluster.
Navigation Next Turn Pop-ups

Displayed In Cluster — If Equipped

On

Off

Phone Pop-ups Displayed in Cluster

— If Equipped

On

Off

Setting Name

Selectable Options

9

512 MULTIMEDIA

Units

After pressing the “Units” button on the touchscreen, you may select each unit of measure independently displayed in the

instrument cluster display, and navigation system (if equipped). The following selectable units of measure are listed below:

Setting Name

Selectable Options

Units

US

Metric

Custom

NOTE:

When the “Custom” setting is selected, units will appear according to your personally configured settings. To configure these

settings, press the “Custom” bar. The following settings will appear:

Speed

MPH

km/h

Distance

mi

km

Fuel Consumption

MPG (US)

MPG (UK)

L/100 km

km/L

Pressure

psi

kPa

bar

Power — If Equipped

HP (US)

HP (UK)

Kw

Temperature

°F

°C

Torque — If Equipped

lb-ft

Nm

MULTIMEDIA

513

Voice

After pressing the “Voice” button on the touchscreen, the following settings will be available:

Clock

After pressing the “Clock & Date” button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Voice Response Length

Brief

Detailed

Show Command List

Never

w/Help

Always

Setting Name

Selectable Options

Sync Time With GPS — If Equipped

On

Off

Set Time Hours

–

+

Set Time Minutes

–

+

Time Format

12hrs

24hrs

AM

PM

Show Time In Status Bar — If

Equipped

On

Off

NOTE:

The “Show Time In Status Bar” feature allows you to turn on or shut off the digital clock in the status bar.

9

514 MULTIMEDIA

Safety & Driving Assistance

After pressing the “Safety & Driving Assistance” button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Surround View Camera — If

Equipped

On

Off

NOTE:

The “Surround View Camera” feature displays a complete 360 degree view of the vehicle's exterior environment while

backing up.
Surround View Camera

Delay — If Equipped

On

Off

NOTE:

The “Surround View Camera Delay” setting determines whether or not the screen will display the 360 degree view image

with guidelines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle’s

speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF position.
Surround View Camera

Guidelines — If Equipped

On

Off

NOTE:

The “Surround View Rear Back Up Camera Active Guidelines” feature allows you to see active guidelines over the Surround

View camera display whenever the gear selector is put into REVERSE or the Surround View button on the touchscreen is

pressed. The image will be displayed on the radio touchscreen display.
ParkView Backup Camera

Delay

On

Off

MULTIMEDIA

515

NOTE:

The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image with

dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the

vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF posi-

tion.
Active Parkview Backup

Camera Guidelines

On

Off

NOTE:

The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or

dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering wheel posi-

tion when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist with parking or

aligning to a hitch/receiver.
Fixed Parkview Backup

Camera Guidelines

On

Off

Forward Facing Camera

Guidelines — If Equipped

On

Off

NOTE:

The “Forward Facing Camera Guidelines” feature is an off-road type of feature that shows the path of the tires based on the

steering wheel input.
CHMSL

(Center

High

Mounted Stop Lamp) Camera

Dynamic Centerline — If

Equipped

On

Off

Setting Name

Selectable Options

9

516 MULTIMEDIA

NOTE:

When the “CHMSL Camera Dynamic Centerline” feature is selected, it will assist in backing up for trailer alignment and

hook up.
Forward Collision Warning

— If Equipped

Off

Warning Only

Warning & Braking

NOTE:

Apples brakes to slow the vehicle in case of potential forward collision, or applies brakes and a warning.
Forward Collision Warning

Sensitivity — If Equipped

Near

Med

Far

NOTE:

Sets the distance in which a Forward Collision Warning occurs.
Front ParkSense Volume

Low

Med

High

Rear ParkSense Volume

Low

Med

High

Power Side Steps — If

Equipped

Auto

Store

Blind Spot Alert

Off

Lights

Lights & Chime

Setting Name

Selectable Options

MULTIMEDIA

517

Mirrors & Wipers

After pressing the “Mirrors & Wipers” button on the touchscreen, the following settings will be available:

NOTE:

Brakes the vehicle while in reverse if potential rear collision is detected.
Hill Start Assist — If

Equipped

On

Off

Tire Fill Assist — If

Equipped

On

Off

Setting Name

Selectable Options

Setting Name

Selectable Options

Tilt Side Mirrors In Reverse — If

Equipped

On

Off

NOTE:

When the “Tilt Side Mirrors In Reverse” feature is selected, the outside side-view mirrors will tilt downward when the igni-

tion is in the RUN position and the transmission gear selector is in the REVERSE position. The mirrors will move back to

their previous position when the transmission is shifted out of REVERSE.
Rain Sensing Auto Wipers — If

Equipped

On

Off

NOTE:

Automatically adjusts the wiper speed based on the amount of precipitation.
Headlights with Wipers

On

Off

9

518 MULTIMEDIA

Lights

After pressing the “Lights” button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Headlight Off Delay

–

+

NOTE:

When the “Headlight Off Delay” feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or

90 seconds when exiting the vehicle.

Headlight Illumination On Approach

–

+

NOTE:

When the “Headlight Illumination On Approach” feature is selected, the headlights will activate and remain on for 0, 30, 60,

or 90 seconds when the doors are unlocked with the key fob.

Headlights With Wipers — If

Equipped

On

Off

NOTE:

When the “Headlights With Wipers” feature is selected, and the headlight switch is in the AUTO position, the headlights

turn on approximately ten seconds after the wipers are turned on. The headlights also turn off when the wipers are turned

off if they were turned on by this feature.

Auto Dim High Beams — If Equipped

On

Off

NOTE:

When the “Auto Dim High Beams” feature is selected, the high beam headlights deactivate automatically under certain

conditions.

Daytime Running Lights — If

Equipped

On

Off

MULTIMEDIA

519

Doors & Locks

After pressing the “Doors & Locks” button on the touchscreen, the following settings will be available:

Flash Lights With Lock

On

Off

NOTE:

When the “Flash Lights With Lock” feature is selected, the exterior lamps flash when the doors are locked or unlocked with

the key fob. This feature may be selected with or without the sound horn on lock feature selected.

Rear Cargo Guidance Lights — If

Equipped

On

Off

NOTE:

When the “Rear Cargo Guidance Lights” feature is selected, the lights in the cargo and bed of the truck will come on either

when the headlight switch is pressed, or the button on the back bed of the truck is pressed.

Setting Name

Selectable Options

Setting Name

Selectable Options

Auto Door Locks — If

Equipped

On

Off

NOTE:

When the “Auto Door Locks” feature is selected, all doors lock automatically when the vehicle reaches a speed of 15 mph

(24 km/h).
Auto Unlock On Exit

On

Off

NOTE:

When the “Auto Unlock On Exit” feature is selected, all doors unlock when the vehicle is stopped and the transmission is in

the PARK or NEUTRAL position and the driver's door is opened.

9

520 MULTIMEDIA

Flash Lights With Lock

On

Off

NOTE:

When the “Flash Lights With Lock” feature is selected, the front and rear turn signals flash when the doors are locked or

unlocked with the key fob. This feature may be selected with or without the “Sound Horn With Lock” feature selected.
Sound Horn With Lock

Off

1st Press

2nd Press

Sound Horn With Remote

Start

On

Off

1st Press Of Key Fob Unlocks Driver Door

All Doors

NOTE:
• When “1st Press Of Key Fob Unlocks: Driver Door” is selected, only the driver's door unlocks on the first press of the key

fob unlock button. You must push the key fob unlock button twice to unlock the passenger's doors.

• When “All Doors” is selected, all of the doors unlock on the first push of the key fob unlock button.
• If the vehicle is programmed “1st Press Of Key Fob Unlocks: All Doors”, all doors will unlock no matter which Passive

Entry equipped door handle is grasped. If “1st Press Of Key Fob Unlocks: Driver Door” is programmed, only the driver’s

door will unlock when the driver’s door is grasped.

• With Passive Entry, if “1st Press Of Key Fob Unlocks: Driver Door” is programmed pushing the handle more than once

only results in the driver’s door opening. If “Driver Door” is selected, once the driver’s door is opened, the interior door

lock/unlock switch can be used to unlock all doors (or use key fob).

Passive Entry — If Equipped On

Off

Setting Name

Selectable Options

MULTIMEDIA

521

Power Side Steps — If Equipped

After pressing the “Power Side Steps” button on the touchscreen, the following settings will be available:

NOTE:

The “Passive Entry” feature allows you to lock and unlock the vehicle’s door(s) without having to push the key fob lock or

unlock buttons.
Personal Settings Linked To

Key Fob — If Equipped

On

Off

NOTE:
• The “Personal Settings Linked To Key Fob” feature provides automatic driver seat positioning to enhance driver mobility

when entering and exiting the vehicle.

• The seats return to the memorized seat location (if “Personal Settings Linked To Key Fob” is set to on) when the key fob is

used to unlock the door.

Setting Name

Selectable Options

Setting Name

Selectable Options

Power Side Steps

Automatic

Stow

9

522 MULTIMEDIA

Auto Comfort Systems — If Equipped

After pressing the “Auto-On Comfort” button on the touchscreen, the following settings will be available:

Engine Off Options

After pressing the “Engine Off Options” button on the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Auto-On Driver Heated/

Ventilated Seat & Steering

Wheel With Vehicle Start —

If Equipped

Off

Remote Start

All Starts

NOTE:

When the “Auto-On Driver Heated/Ventilated Seat & Steering Wheel With Vehicle Start” feature is selected the driver's

heated seat and heated steering wheel will automatically turn on when temperatures are below 40° F (4.4° C). When tempera-

tures are above 80° F (26.7° C), the driver vented seat will turn on.

Setting Name

Selectable Options

Engine Off Power Delay

–

+

NOTE:

When the “Engine Off Power Delay” feature is selected, the power window switches, radio, Uconnect phone system (if

equipped), power sunroof (if equipped), and power outlets will remain active for up to ten minutes after the ignition is cycled

to OFF. Opening either front door will cancel this feature.

MULTIMEDIA

523

Air Suspension — If Equipped

After pressing the “Suspension” button on the touchscreen, the following settings will be available:

Headlight Off Delay

–

+

NOTE:

When the “Headlight Off Delay” feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or

90 seconds when exiting the vehicle.

Setting Name

Selectable Options

Setting Name

Selectable Options

Display Suspension

Messages

All

Warnings Only

Tire Jack Mode

On

Off

NOTE:

When the “Tire Jack Mode” feature is selected, the air suspension system is disabled to assist with changing a spare tire.

Transport Mode

On

Off

NOTE:

When the “Transport Mode” feature is selected, the air suspension system lowers and then disables to assist with flat bed

towing.

Wheel Alignment Mode

On

Off

9