RAM 3500 Chassis Cab (2019 year). Instruction — part 31
492 MULTIMEDIA
Voice
After pressing the “Voice” button on the touchscreen, the following settings will be available:
Clock
After pressing the “Clock” button on the touchscreen, the following settings will be available:
Power — If Equipped
HP (US)
HP (UK)
Kw
Temperature
°C
°F
Torque — If Equipped
lb-ft
Nm
Setting Name
Selectable Options
Setting Name
Selectable Options
Voice Response Length
Brief
Detailed
Show Command List
Always
With Help
Never
Setting Name
Selectable Options
Set Time
12 hour
24 hour
NOTE:
Within the “Set Time” feature, press the corresponding arrow above and below the current time to adjust, then select “AM”
or “PM.”
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
493
Safety/Assistance
After pressing the “Safety/Assistance” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Forward Collision Warning
— If Equipped
Off
Warning Only
Warning & Braking
Forward Collision Warning
Sensitivity — If Equipped
Near
Med
Far
Front ParkSense Chime
Volume
Low
Med
High
Rear ParkSense Chime
Volume — If Equipped
Low
Med
High
Tilt Side Mirrors In Reverse
— If Equipped
On
Off
NOTE:
When the “Tilt Side Mirrors In Reverse” feature is selected, the exterior side-view mirrors tilt downward when the ignition
is in the RUN position and the transmission gear selector is in the REVERSE position. The mirrors move back to their
previous position when the transmission is shifted out of REVERSE.
Surround View Camera — If
Equipped
On
Off
NOTE:
The “Surround View Camera” feature displays a complete 360 degree view of the vehicle's exterior environment while
backing up.
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
494 MULTIMEDIA
Surround View Camera
Delay — If Equipped
On
Off
NOTE:
The “Surround View Camera Delay” setting determines whether or not the screen will display the 360 degree view image
with guidelines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle’s
speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF position.
Surround View Camera
Guidelines — If Equipped
On
Off
NOTE:
The “Surround View Rear Back Up Camera Active Guidelines” feature allows you to see active guidelines over the Surround
View camera display whenever the gear selector is put into REVERSE or the Surround View button on the touchscreen is
pressed. The image will be displayed on the radio touchscreen display.
ParkView Backup Camera
Active Guidelines
On
Off
NOTE:
Your vehicle may be equipped with the ParkView Rear Back Up Camera Active Guidelines that allows you to see active
guidelines over the ParkView Back up camera display whenever the gear selector is put into REVERSE. The image will be
displayed on the radio touchscreen display along with a caution note to “check entire surroundings” across the top of the
screen. After five seconds, this note disappears.
ParkView Backup Camera
Delay
On
Off
Setting Name
Selectable Options
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
495
NOTE:
When the vehicle is shifted out of REVERSE (with camera delay turned OFF), the rear camera mode is exited and the navi-
gation or audio screen appears again. When the vehicle is shifted out of REVERSE (with camera delay turned ON), the rear
view image with dynamic grid lines will be displayed for up to ten seconds after shifting out of REVERSE unless the forward
vehicle speed exceeds 8 mph (12 km/h), the transmission is shifted into PARK or the ignition is switched to the OFF position.
Forward Facing Camera
Guidelines — If Equipped
On
Off
NOTE:
The “Forward Facing Camera Guidelines” feature is an off-road type of feature that shows the path of the tires based on the
steering wheel input.
CHMSL
(Center
High
Mounted Stop Lamp) Camera
Dynamic Centerline — If
Equipped
On
Off
NOTE:
When the “CHMSL Camera Dynamic Centerline” feature is selected, it will assist in backing up for trailer alignment and
hook up.
Rain Sensing Auto Wipers
— If Equipped
On
Off
NOTE:
When the “Rain Sensing Auto Wipers” feature is selected, the system automatically activates the windshield wipers if it
senses moisture on the windshield.
Setting Name
Selectable Options
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
496 MULTIMEDIA
Lights
After pressing the “Lights” button on the touchscreen, the following settings will be available:
Hill Start Assist — If
Equipped
On
Off
NOTE:
When the “Hill Start Assist” feature is selected, the Hill Start Assist (HSA) system becomes active.
Tire Fill Assist
On
Off
Setting Name
Selectable Options
Setting Name
Selectable Options
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
Headlight Illumination On Approach
0 sec
30 sec
60 sec
90 sec
NOTE:
When the “Headlight Illumination On Approach” feature is selected, it allows the adjustment of the amount of time the head-
lights remain on when the doors are unlocked with the key fob.
Headlights With Wipers — If
Equipped
On
Off
Auto Dim High Beams — If Equipped On
Off
Flash Lights With Lock
On
Off
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
497
Doors & Locks
After pressing the “Doors & Locks” button on the touchscreen, the following settings will be available:
NOTE:
When the “Flash Lights With Lock” feature is selected, the exterior lights flash when the doors are locked or unlocked with
the key fob. This feature may be selected with or without the sound horn on lock feature selected.
Steering Directed Lights
On
Off
NOTE:
When the “Steering Directed Lights” feature is selected, the headlights turn with the direction of the steering wheel.
Rear Cargo Guidance Lights — If
Equipped
On
Off
NOTE:
When the “Rear Cargo Guidance Lights” feature is selected, the lights in the cargo and bed of the truck will come on either
when the headlight switch is pressed, or the button on the back bed of the truck is pressed.
Setting Name
Selectable Options
Setting Name
Selectable Options
Auto Door Locks — If
Equipped
On
Off
NOTE:
When the “Auto Door Locks” feature is selected, all doors lock automatically when the vehicle reaches a speed of 15 mph
(24 km/h).
Auto Unlock On Exit
On
Off
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
498 MULTIMEDIA
NOTE:
When the “Auto Unlock On Exit” feature is selected, all doors unlock when the vehicle is stopped, the transmission is in the
PARK or NEUTRAL position and the driver's door is opened.
Sound Horn With Lock
Off
1st Press
2nd Press
Remote Door Unlock
All
Driver
NOTE:
The “Remote Door Unlock” feature allows you to program your remote door locks to open “All doors” or only the “Driver
door” with the first push of the key fob or grabbing the Passive Entry door handle.
Sound Horn With Remote
Start
On
Off
NOTE:
When the “Sound Horn With Remote Start” feature is selected, the horn sounds when the remote start is activated.
Memory Linked To Fob — If
Equipped
On
Off
NOTE:
• The “Memory Linked To Fob” feature provides automatic driver seat positioning to enhance driver mobility when
entering and exiting the vehicle.
• The seat returns to the memorized seat location if “Memory Linked To Fob” is set to (On) when the key fob is used to
unlock the door.
Passive Entry — If Equipped On
Off
Setting Name
Selectable Options
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
499
Power Side Steps — If Equipped
After pressing the “Power Side Steps” button on the touchscreen, the following settings will be available:
NOTE:
The “Passive Entry” feature allows you to lock and unlock the vehicle’s door(s) without having to push the key fob lock or
unlock buttons. It automatically unlocks the doors when the outside door handle is grabbed.
Flash Lights With Lock
On
Off
NOTE:
When the “Flash Lights With Lock” feature is selected, the exterior lights flash when the doors are locked or unlocked with
the key fob. This feature may be selected with or without the “Sound Horn With Lock” feature selected.
Setting Name
Selectable Options
Setting Name
Selectable Options
Power Side Steps
Automatic
Stow
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
500 MULTIMEDIA
Auto Comfort Systems — If Equipped
After pressing the “Auto-On Comfort” button on the touchscreen, the following settings will be available:
Engine Off Options
After pressing the “Engine Off Options” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Auto-On Driver Heated/
Ventilated Seat & Steering
Wheel With Vehicle Start —
If Equipped
Off
Remote Start Only
All Starts
NOTE:
When the “Auto-On Driver Heated/Ventilated Seat & Steering Wheel With Vehicle Start” feature is selected the driver's
heated seat and heated steering wheel will automatically turn on when temperatures are below 40° F (4.4° C). When tempera-
tures are above 80° F (26.7° C) the driver vented seat will turn on.
Setting Name
Selectable Options
Easy Exit Seats — If Equipped
On
Off
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
Engine Off Power Delay
0 sec
45 sec
5 min
10 min
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
501
Suspension — If Equipped
After pressing the “Suspension” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Auto Entry/Exit Suspension
On
Off
NOTE:
When the “Auto Entry/Exit Suspension” feature is selected, the vehicle automatically lowers from ride height position when
vehicle shifted to park for easy entry/exit.
Display Suspension Messages
All
Warning Only
Tire Jack Mode
On
Off
NOTE:
When this feature is selected the air suspension system is disabled to prevent auto leveling of the suspension, while the
vehicle is on a jack changing a tire.
Transport Mode
On
Off
NOTE:
When the “Transport Mode” feature is selected, the air suspension system is disabled to assist with flat bed towing.
Wheel Alignment Mode
On
Off
NOTE:
The “Wheel Alignment Mode” feature prevents auto leveling of the air suspension while performing a wheel alignment
service. Before performing a wheel alignment, this mode must be enabled. Refer to an authorized dealer for further informa-
tion.
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
502 MULTIMEDIA
Trailer Brake
After pressing the “Trailer Brake” button on the touchscreen, the following settings will be available:
Audio
After pressing the “Audio” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Trailer Select
Trailer 1
Trailer 2
Trailer 3
Trailer 4
Trailer Brake Type
Light Electric
Heavy Electric
Light EOH
Heavy EOH
Trailer Name
List of Trailer Names Available
NOTE:
You can select and personalize your trailer name depending on the type of trailer you are hauling. Select the trailer name
from the following list: trailer, boat, car, cargo, dump, equipment, flatbed, gooseneck, horse, livestock, motorcycle, snow
mobile, travel, utility, and 5th wheel.
Setting Name
Selectable Options
Balance/Fade
Front
Back
Left
Right
NOTE:
The “Balance/Fade” feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon or use the
arrows to adjust, tap the “C” icon to readjust to the center.
Equalizer
+
–
NOTE:
When in the “Equalizer” display you may adjust the Bass, Mid and Treble settings.
Speed Adjusted Volume Off
1
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
503
NOTE:
The “Speed Adjusted Volume” feature increases or decreases volume relative to vehicle speed.
Surround Sound — If
Equipped
On
Off
NOTE:
The “Surround Sound” feature provides simulated surround sound mode.
AUX Volume Offset
— If Equipped
On
Off
NOTE:
The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through the
AUX input.
Loudness — If
Equipped
On
Off
NOTE:
The “Loudness” feature improves sound quality at lower volumes.
Setting Name
Selectable Options
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
504 MULTIMEDIA
Compass Settings — If Equipped
After pressing the “Compass Settings” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Variance
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NOTE:
• Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences the
variance should be set for the zone where the vehicle is driven, per the zone map. Once properly set, the compass will auto-
matically compensate for the differences, and provide the most accurate compass heading.
• Keep magnetic materials away from the top of the instrument panel, such as iPod's, Mobile Phones, Laptops and Radar
Detectors. This is where the compass module is located, and it can cause interference with the compass sensor, and it may
give false readings.
Perform Compass
Calibration
On
Off
NOTE:
Press the “Calibration” button on the touchscreen to change this setting. This compass is self-calibrating, which eliminates
the need to instructionly reset the compass. When the vehicle is new, the compass may appear erratic until it is calibrated. You
may also calibrate the compass by pressing the “ON” button on the touchscreen and completing one or more 360-degree
turns (in an area free from large metal or metallic objects). The compass will now function normally.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
505
Compass Variance Zone Map
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
506 MULTIMEDIA
Phone/Bluetooth
After pressing the “Phone/Bluetooth” button on the touchscreen, the following settings will be available:
SiriusXM Setup — If Equipped
After pressing the “SiriusXM Setup” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Paired Phones
List of Paired Phones
NOTE:
The “Paired Phones” feature shows which phones are paired to the Phone/Bluetooth system. For further information, refer
to the Uconnect Owner’s Instruction Supplement.
Setting Name
Selectable Options
Tune Start
On
Off
Channel Skip
List of Channels
NOTE:
SiriusXM can be programmed to exclude undesirable channels while scanning. To make your selection, press the “Channel
Skip” button on the touchscreen, select the channels you would like to skip.
Subscription Info
Sirius ID
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
507
Restore Default Settings
After pressing the “Restore Default Settings” button on the touchscreen, the following settings will be available:
NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your radio.
Following the expiration of the free services, it will be necessary to access the information on the Subscription Information
screen to re-subscribe.
1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.
2. Write down the SIRIUS ID numbers for your receiver. To reactivate your service, either call the number listed on the
screen or visit the provider online.
Setting Name
Selectable Options
Setting Name
Selectable Options
Restore Default Settings
Yes
Cancel
NOTE:
When the “Restore Default Settings” feature is selected it will reset the Display, Clock, Audio, and Radio Settings to their
default settings. If “Yes” is selected a pop-up will appear asking "Are you sure you want to reset your settings to default?”
select “Yes” to restore, or “Cancel” to exit.
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст