Nissan Pathfinder (2005 year). Instruction — part 236
FLOOR TRIM
EI-29
C
D
E
F
G
H
J
K
L
M
A
B
EI
2005 Pathfinder
FLOOR TRIM
PFP:74902
Removal and Installation
EIS0044G
Front and Rear Floor Carpet
REMOVAL
Front Carpet
1.
Remove front seats. Refer to
.
2.
Remove lower seat belt anchors. Refer to
.
3.
Remove lower body side trim panels. Refer to
.
4.
Remove center console. Refer to
.
5.
Remove floor mat hook from front carpet.
6.
Remove front carpet.
Rear Carpet
1.
Remove 3rd row seats. Refer to
.
2.
Remove luggage side lower finisher RH and LH. Refer to
EI-34, "Removal and Installation"
.
3.
Remove flipper doors and floor tray. Refer to
EI-34, "Removal and Installation"
.
4.
Remove the bolts and the storage box. Refer to
EI-34, "Removal and Installation"
.
5.
Remove the rear carpet.
INSTALLATION
Installation is in the reverse order of removal.
LIIA1770E
1.
Front carpet
2.
Floor mat hook
3.
Clip
4.
Rear carpet
EI-30
HEADLINING
2005 Pathfinder
HEADLINING
PFP:73910
Removal and Installation
EIS0044H
REMOVAL
1.
Disconnect both the positive and negative battery terminals.
CAUTION:
Disconnect both the positive and negative battery terminals in advance.
2.
Remove body side trim panels. Refer to
.
3.
Remove luggage floor trim upper panels. Refer to
.
4.
Remove sun visor assemblies, both LH and RH.
5.
Remove sun visor holders LH and RH.
1.
Sun visor holder LH/RH
2.
Sun visor assembly RH
3.
Front assist grip RH
4.
Rear assist grip LH
5.
Front roof console with front room
lamp assembly and sunglass bin
6.
Sunroof welt (if equipped)
7.
DVD video monitor finisher (if
equipped)
8.
Center room lamp assembly
9.
Rear room lamp assembly
10.
Clip
11.
Rear assist grip LH
12. Headlining
13.
Sun visor assembly LH
LIIA1778E
HEADLINING
EI-31
C
D
E
F
G
H
J
K
L
M
A
B
EI
2005 Pathfinder
6.
Remove sunroof welt (if equipped).
7.
Remove DVD video monitor assembly (if equipped). Refer to
AV-68, "Removal and Installation of Video
.
●
Disconnect harnesses.
8.
Remove assist grips.
9.
Remove the screws and the front roof console.
●
Disconnect harness.
10. Remove the center room and rear room lamp assemblies.
11. Remove rear upper overhead duct (if equipped). Refer to
ATC-149, "REAR OVERHEAD DUCTS"
.
12. Remove headlining.
NOTE:
Use an assistant to steady the headlining while lowering from roof.
●
Remove clips from center of headlining.
●
Remove clips from rear of headlining.
●
Disconnect rear washer tube at front connection, allow to drain.
●
Disconnect harnesses and rear washer tube rear connections.
13. Remove assist grip brackets from roof.
INSTALLATION
Installation is in the reverse order of removal.
EI-32
LUGGAGE FLOOR TRIM
2005 Pathfinder
LUGGAGE FLOOR TRIM
PFP:84999
Components
EIS00506
Luggage Trim - Side
LIIA1783E
LUGGAGE FLOOR TRIM
EI-33
C
D
E
F
G
H
J
K
L
M
A
B
EI
2005 Pathfinder
Luggage Trim - Floor
1.
Metal clip
2.
Garnish
3.
Luggage side upper finisher RH
4.
Luggage side lower finisher RH
5.
Cup holder and tray
6.
Access cover
7.
Luggage side lower finisher LH
8.
Cup holder
9.
Storage bin
10. Access cover
11.
Side cargo net
12. Luggage side upper finisher LH
13. Coat hook
LIIA1784E
1.
Floor storage bin
2.
Flipper panel
3.
Storage tray
4.
Luggage floor board latch
5.
Luggage floor board
6.
Tailgate kick plate
7.
Cargo net
EI-34
LUGGAGE FLOOR TRIM
2005 Pathfinder
Removal and Installation
EIS0044I
REMOVAL
1.
Remove the 2nd and 3rd row seat belts. Refer to
.
2.
Remove the third row seat belt buckles. Refer to
.
3.
Remove the third row seat assembly. Refer to
.
4.
Remove the rear door kick plates. refer to
.
5.
Remove the tailgate kick plate.
6.
Disconnect the door open/close link. Refer to
.
7.
Remove the cargo net hooks.
8.
Remove the LH and RH luggage side lower finishers.
●
Disconnect the power point on the RH side.
9.
Remove the LH and RH coat hooks.
10. Remove the LH and RH luggage side upper finishers.
11. Remove the cargo net hooks LH/RH.
12. Remove the luggage floor board.
13. Remove the flipper panel.
14. Remove the storage tray.
15. Remove the floor storage bin.
INSTALLATION
Installation is in the reverse order of removal.
BACK DOOR TRIM
EI-35
C
D
E
F
G
H
J
K
L
M
A
B
EI
2005 Pathfinder
BACK DOOR TRIM
PFP:90900
Removal and Installation
EIS0044J
REMOVAL
1.
Open back door glass.
2.
Disconnect the gas spring LH and RH from back door (through window garnish).
3.
Open the back door, release the clips and remove back door window garnish.
4.
Remove the screw and back door handle.
5.
Release the clips and remove back door finisher assembly.
INSTALLATION
Installation in the reverse order of removal.
1.
Back door window garnish
2.
Back door finisher
3.
Back door handle bracket
4.
Back door handle
5.
First aid kit strap
6.
First aid kit
LIIA1777E
EI-36
BACK DOOR TRIM
2005 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст