Nissan Pathfinder (2005 year). Instruction — part 38
DISASSEMBLY
AT-275
D
E
F
G
H
I
J
K
L
M
A
B
AT
2005 Pathfinder
47. Remove seal rings from output shaft.
48. Remove needle bearing from transmission case.
49. Remove revolution sensor from transmission case.
CAUTION:
●
Do not subject it to impact by dropping or hitting it.
●
Do not disassemble.
●
Do not allow metal filings, etc. to get on the sensor's front
edge magnetic area.
●
Do not place in an area affected by magnetism.
50. Remove reverse brake snap ring (fixing plate) using 2 flat-
bladed screwdrivers.
NOTE:
Press out snap ring from the transmission case oil pan side gap
using a flat-bladed screwdriver, and remove it using a another
screwdriver.
51. Remove reverse brake retaining plate from transmission case.
●
Check facing for burns, cracks or damage. If necessary,
replace the plate.
52. Remove N-spring from transmission case.
SCIA5209E
SCIA5031E
SCIA2320E
SCIA5032E
SCIA5214E
AT-276
DISASSEMBLY
2005 Pathfinder
53. Remove reverse brake drive plates, driven plates and dish plate
from transmission case.
●
Check facing for burns, cracks or damage. If necessary,
replace the plate.
54. Remove snap ring (fixing spring retainer) using a flat-bladed
screwdriver.
55. Remove spring retainer and return spring from transmission
case.
56. Remove seal rings from drum support.
57. Remove needle bearing from drum support edge surface.
SCIA2322E
SCIA2323E
SCIA2324E
SCIA3333E
SCIA2796E
DISASSEMBLY
AT-277
D
E
F
G
H
I
J
K
L
M
A
B
AT
2005 Pathfinder
58. Remove reverse brake piston from transmission case with com-
pressed air. Refer to
.
CAUTION:
Care should be taken not to abruptly blow air. It makes pis-
tons incline, as the result, it becomes hard to disassemble
the pistons.
59. Remove D-rings from reverse brake piston.
60. Use a pin punch (4mm dia. commercial service tool) to knock
out retaining pin.
61. Remove instruction shaft retaining pin with a pair of nippers.
SCIA5047E
SCIA6330E
SCIA2328E
SCIA2329E
AT-278
DISASSEMBLY
2005 Pathfinder
62. Remove instruction plate (with parking rod) from instruction shaft.
63. Remove parking rod from instruction plate.
64. Remove instruction shaft from transmission case.
65. Remove instruction shaft oil seals using a flat-bladed screwdriver.
CAUTION:
Be careful not to scratch transmission case.
66. Remove detent spring and spacer from transmission case.
SCIA5715E
SCIA5220E
SCIA5716E
SCIA2331E
SCIA5248E
DISASSEMBLY
AT-279
D
E
F
G
H
I
J
K
L
M
A
B
AT
2005 Pathfinder
67. Using a pair of snap ring pliers, remove snap ring from transmis-
sion case.
68. Remove servo assembly (with return spring) from transmission
case.
69. Remove return spring from servo assembly.
70. Remove O-rings from servo assembly.
71. Remove needle bearing (1) from rear extension (2WD models)
or adapter case (4WD models).
SCIA2333E
SCIA5679E
SCIA5717E
SCIA5719E
SCIA6179J
AT-280
DISASSEMBLY
2005 Pathfinder
72. Remove parking actuator support from rear extension (2WD
models) or adapter case (4WD models).
73. Remove parking pawl (with return spring) and pawl shaft from
rear extension (2WD models) or adapter case (4WD models).
74. Remove return spring (1) from parking pawl (2).
75. Remove rear oil seal from rear extension (2WD models) or
adapter case (4WD models).
CAUTION:
Be careful not to scratch rear extension (2WD models) or
adapter case (4WD models).
SCIA3423E
SCIA3424E
SCIA6180J
SCIA5272E
REPAIR FOR COMPONENT PARTS
AT-281
D
E
F
G
H
I
J
K
L
M
A
B
AT
2005 Pathfinder
REPAIR FOR COMPONENT PARTS
PFP:00000
Oil Pump
UCS003Z5
COMPONENTS
DISASSEMBLY
1.
Remove oil pump housing from oil pump cover.
2.
Remove oil pump housing oil seal using a flat-bladed screw-
driver.
CAUTION:
Be careful not to scratch oil pump housing.
1.
O-ring
2.
Oil pump cover
3.
O-ring
4.
Oil pump housing
5.
Oil pump housing oil seal
SCIA5227E
SCIA5228E
SCIA2840E
AT-282
REPAIR FOR COMPONENT PARTS
2005 Pathfinder
3.
Remove O-ring from oil pump housing.
4.
Remove O-ring from oil pump cover.
ASSEMBLY
1.
Install O-ring to oil pump cover.
CAUTION:
●
Do not reuse O-ring.
●
Apply ATF to O-ring.
2.
Install O-ring to oil pump housing.
CAUTION:
●
Do not reuse O-ring.
●
Apply ATF to O-ring.
SCIA2841E
SCIA5230E
SCIA5230E
SCIA2841E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст