Nissan X-Trail 32. Instruction — part 616
SYSTEM
DLK-805
< SYSTEM DESCRIPTION >
[TYPE 4]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM DIAGRAM
SIGNAL PATH
• BCM transmits door switch signal to combination meter via CAN communication.
• When combination meter judges according to received door switch signal that a door is open or not fully
closed, door open warning displays.
WARNING/INDICATOR OPERATIONG CONDITION
Each door switch is ON
WARNING/INDICATOR CANCEL CONDITION
All door switches are OFF
TIMING CHART
INFORMATION DISPLAY (COMBINATION METER) : Key System Malfunction
INFOID:0000000010755016
DESIGN/PURPOSE
Information display warns the driver that engine cannot be started.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Synchronization is applied.
Refer to
MWI-47, "WARNING LAMPS/INDICATOR LAMPS : Master Warning Lamp"
JMKIB3593GB
JMKIB3594GB
Symbol
Message
Key System Error
See Owner’s Instruction
JMKIB1398ZZ
DLK-806
< SYSTEM DESCRIPTION >
[TYPE 4]
SYSTEM
SYSTEM DIAGRAM
SIGNAL PATH
• When BCM detects that the engine cannot be started, meter display signal is transmitted by BCM to combi-
nation meter via CAN communication.
• When combination meter receives meter display signal, key system malfunction displays.
WARNING/INDICATOR OPERATING CONDITION
The engine cannot be started.
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
• Engine non-start status is resolved.
• Ignition switch is turned to LOCK or OFF, and 15 seconds are passed.
WARNING/INDICATOR/CHIME LIST
WARNING/INDICATOR/CHIME LIST : Warning Lamp/Indicator (Information Display)
INFOID:0000000010755017
WARNING/INDICATOR/CHIME LIST : Warning Chime
INFOID:0000000010755018
JMKIB3620GB
Item
Reference
Door open warning
DLK-804, "INFORMATION DISPLAY (COMBINATION METER) :
Key system malfunction
DLK-805, "INFORMATION DISPLAY (COMBINATION METER) :
Item
Reference
Key warning chime
Refer to
WCS-11, "WARNING CHIME : Key Warning Chime (Without Intelligent Key Sys-
.
DIAGNOSIS SYSTEM (BCM)
DLK-807
< SYSTEM DESCRIPTION >
[TYPE 4]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000010869007
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.
×
: Applicable item
NOTE:
*: This item is displayed, but not used.
FREEZE FRAME DATA (FFD)
The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on
CONSULT.
Diagnosis mode
Function Description
Work Support
Changes the setting for each system function.
Self Diagnostic Result
Displays the diagnosis results judged by BCM.
CAN Diag Support Monitor
Monitors the reception status of CAN communication viewed from BCM.
Data Monitor
The BCM input/output signals are displayed.
Active Test
The signals used to activate each device are forcibly supplied from BCM.
Ecu Identification
The BCM part number is displayed.
Configuration
• Read and save the vehicle specification.
• Write the vehicle specification when replacing BCM.
System
Sub system selection item
Diagnosis mode
Work Support
Data Monitor
Active Test
Door lock
DOOR LOCK
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Exterior lamp
HEAD LAMP
×
×
×
Interior room lamp control
INT LAMP
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps
FLASHER
×
×
—
AIR CONDITONER*
×
×
Intelligent Key system
INTELLIGENT KEY
×
×
×
Combination switch
COMB SW
×
Body control system
BCM
×
NVIS - NATS
IMMU
×
Interior room lamp battery saver
BATTERY SAVER
×
Back door open
TRUNK
×
Vehicle security
THEFT ALM
×
×
RAP
RETAINED PWR
×
Remote keyless entry system
MULTI REMOTE ENT
×
×
Signal buffer system
SIGNAL BUFFER
×
×
DLK-808
< SYSTEM DESCRIPTION >
[TYPE 4]
DIAGNOSIS SYSTEM (BCM)
DOOR LOCK
DOOR LOCK : CONSULT Function (BCM - DOOR LOCK) (Without Intelligent Key
System and Super Lock)
INFOID:0000000010755020
WORK SUPPORT
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
ACTIVE TEST
CONSULT screen item
Indication/Unit
Description
BATTERY VOLTAGE
V
Battery voltage of the moment a particular DTC is detected.
VEHICLE SPEED
km/h
Vehicle speed of the moment a particular DTC is detected.
EXTERNAL TEMP
°
C
External temperature of the moment a particular DTC is detected
VEHICLE COND
—
NOTE:
This item is displayed, but cannot be use this item.
DOOR LOCK STATUS
—
NOTE:
This item is displayed, but cannot be use this item.
POWER SUPPLY
COUNTER
min
Displays the cumulative time from the time that the battery terminal is connected.
Monitor item
Description
DOOR LOCK-UNLOCK SET
Selective unlock function mode can be changed to operation with this mode
• On: Operate
• Off: Non-operation
AUTO UNLOCK TYPE
NOTE:
This item is displayed, but cannot be used
SIGNATURE LIGHT SETTING
Signature light function can be changed to operation with this mode
• On: Operate
• Off: Non-operation
Monitor Item
Contents
DOOR SW-DR
Indicated [On/Off] condition of front door switch (driver side)
DOOR SW-AS
Indicated [On/Off] condition of front door switch (passenger side)
DOOR SW-RR
Indicated [On/Off] condition of rear door switch RH
DOOR SW-RL
Indicated [On/Off] condition of rear door switch LH
DOOR SW-BK
Indicated [On/Off] condition of back door switch
CDL LOCK SW
Indicated [On/Off] condition of lock signal from door lock unlock switch
CDL UNLOCK SW
Indicated [On/Off] condition of unlock signal from door lock unlock switch
KEY CYL LK-SW
NOTE:
This item is displayed, but cannot be monitored
KEY CYL UN-SW
NOTE:
This item is displayed, but cannot be monitored
SHOCK SENSOR
NOTE:
This item is displayed, but cannot be monitored
KEY SW
Indicated [On/Off] condition of key switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст