Nissan X-Trail 32. Instruction — part 2121
TM-442
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
CVT FLUID COOLER SYSTEM
2.
Pull out fluid cooler hose B
and fluid cooler hose D
from
fluid cooler tube assembly.
3.
Remove the mounting bolts (
) of fluid cooler tube assembly
.
4.
Pull out fluid cooler hose A
and fluid cooler hose E
from
fluid cooler tube assembly.
5.
Remove CVT fluid cooler mounting bolts
and mounting nuts
and take out the CVT fluid cooler.
CAUTION:
Be careful not to damage the radiator fins while taking out
the CVT fluid cooler.
6.
Pull out fluid cooler hose B
, fluid cooler hose C
and fluid
cooler hose D
from CVT fluid cooler
and fluid cooler
bracket (with tube)
.
7.
Remove the four bolts (
) and separate bracket
and fluid
cooler bracket (with tube)
from CVT fluid cooler
.
: Hose clamp
: Vehicle front
JSDIA5376ZZ
: Hose clamp
JSDIA5377ZZ
: Vehicle front
JSDIA5378ZZ
: Hose clamp
JSDIA5379ZZ
JSDIA5380ZZ
CVT FLUID COOLER SYSTEM
TM-443
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
8.
Pull out fluid cooler hose E
and fluid cooler hose A
from
CVT oil warmer.
INSTALLATION
Note the followings and Install in the reverse order of removal.
CAUTION:
• Never reuse hose clamp.
• Refer to the followings when installing fluid cooler hoses.
• Refer to the followings when installing hose clamps.
CAUTION:
Hose clamp should not interfere with the bulge of tube.
: Hose clamp
: Vehicle front
JSDIA5381ZZ
Hose
Installation side
tube
Direction of
paint mark
Hose insertion depth (L)
Fluid cooler
hose A
CVT oil warmer
Frontward
: End reaches the 2 stage
bulge .
Fluid cooler tube
assembly
Leftward
: End reaches the 2 stage
bulge .
Fluid cooler
hose B
Fluid cooler tube
assembly
Leftward
: End reaches the 2 stage
bulge .
CVT fluid cooler
Frontward
: End reaches the 2 stage
bulge .
Fluid cooler
hose C
CVT fluid cooler
Frontward
: End reaches the 2 stage
bulge .
Fluid cooler brack-
et (with tube)
Frontward
: End reaches the 2 stage
bulge .
Fluid cooler
hose D
Fluid cooler brack-
et (with tube)
Frontward
: End reaches the 2 stage
bulge .
Fluid cooler tube
assembly
Leftward
: End reaches the 2 stage
bulge .
Fluid cooler
hose E
Fluid cooler tube
assembly
Leftward
: End reaches the 2 stage
bulge .
CVT oil warmer
Frontward
: End reaches the 2 stage
bulge .
JSDIA5382ZZ
TM-444
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
CVT FLUID COOLER SYSTEM
QR25DE : Inspection and Adjustment
INFOID:0000000010622634
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of CVT fluid.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
Hose
Installation side tube
Hose clamp
Direction of tab
Clamping position (A)
Fluid cooler
hose A
CVT oil warmer
Leftward
5 – 9 mm (0.20 – 0.35
in) from hose end
Fluid cooler tube as-
sembly
Leftward
Fluid cooler
hose B
Fluid cooler tube as-
sembly
Leftward
CVT fluid cooler
Frontward
Fluid cooler
hose C
CVT fluid cooler
Frontward
Fluid cooler bracket
(with tube)
Frontward
Fluid cooler
hose D
Fluid cooler bracket
(with tube)
Frontward
Fluid cooler tube as-
sembly
Leftward
Fluid cooler
hose E
Fluid cooler tube as-
sembly
Leftward
CVT oil warmer
Frontward
JSDIA2424ZZ
CVT OIL WARMER
TM-445
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CVT OIL WARMER
MR20DD
MR20DD : Exploded View
INFOID:0000000010622638
MR20DD : Removal and Installation
INFOID:0000000010622639
REMOVAL
WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure
coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to
allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
CAUTION:
Perform when the engine is cold.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid/coolant
from spilling.
1.
Remove battery tray. Refer to
PG-148, "EXCEPT FOR R9M : Removal and Installation"
.
2.
Remove harness bracket
.
3.
Pull out water hose from CVT oil warmer. Refer to
"MR20DD : Removal and Installation"
.
4.
Pull out fluid cooler hose from CVT oil warmer. Refer to
"MR20DD : Removal and Installation"
.
Transaxle assembly
CVT oil warmer
: N·m (kg-m, in-lb)
JSDIA4994GB
JSDIA5244ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст