Nissan X-Trail 32. Instruction — part 2122
TM-446
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
CVT OIL WARMER
5.
Remove mounting bolts (
) and remove CVT oil warmer from
transaxle assembly.
INSTALLATION
Installation is in the reverse order of removal.
MR20DD : Inspection and Adjustment
INFOID:0000000010622640
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of CVT fluid and engine coolant.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
QR25DE
QR25DE : Exploded View
INFOID:0000000010622641
QR25DE : Removal and Installation
INFOID:0000000010622642
REMOVAL
WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure
engine coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter
turn to allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
CAUTION:
Perform when the engine is cold.
1.
Remove engine under cover. Refer to
EXT-40, "ENGINE UNDER COVER : Removal and Installation"
JSDIA5245ZZ
Transaxle assembly
CVT oil warmer
: N·m (kg-m, in-lb)
JSDIA5663GB
CVT OIL WARMER
TM-447
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
2.
Remove battery tray. Refer to
PG-148, "EXCEPT FOR R9M : Removal and Installation"
.
3.
Remove splash side cover LH. Refer to
EXT-35, "FENDER PROTECTOR : Exploded View"
.
4.
Disconnect water hoses from CVT oil warmer. Refer to
TM-433, "QR25DE : Removal and Installation"
5.
Disconnect fluid cooler hoses from CVT oil warmer. Refer to
TM-441, "QR25DE : Removal and Installa-
6.
Remove CVT oil warmer bolts (
) and remove CVT oil warmer
from transaxle assembly.
INSTALLATION
Installation is in the reverse order of removal.
QR25DE : Inspection and Adjustment
INFOID:0000000010622643
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of CVT fluid and engine coolant.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
JSDIA4162ZZ
TM-448
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
PLUG
PLUG
Description
INFOID:0000000010622644
Replace the O-ring if oil leakage or exudes from the plug.
Exploded View
INFOID:0000000010622645
Removal and Installation
INFOID:0000000010622646
REMOVAL
1.
Remove splash side cover LH. Refer to
EXT-35, "FENDER PROTECTOR : Exploded View"
2.
Remove the plug and O-ring.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Never reuse O-ring.
• Apply CVT fluid to O-ring.
Inspection and Adjustment
INFOID:0000000010622647
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
Transaxle assembly
O-ring
Plug
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Apply CVT fluid
JSDIA5433GB
TRANSAXLE ASSEMBLY
TM-449
< UNIT REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
UNIT REMOVAL AND INSTALLATION
TRANSAXLE ASSEMBLY
Exploded View
INFOID:0000000010622648
MR20DD Models
JSDIA5327GB
Transaxle assembly
O-ring
CVT fluid charging pipe
CVT fluid charging pipe cap
: For the tightening torque, refer to
TM-450, "Removal and Installation"
.
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Apply petroleum jelly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст