Nissan X-Trail 32. Instruction — part 1590
MWI-42
< SYSTEM DESCRIPTION >
SYSTEM
High beam indicator lamp informs the driver that headlamp (HI) is in
ON status.
BULB CHECK
Not applicable
SYNCHRONIZATION WITH MASTER WARNING LAMP
Not applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIG-
NAL
For actions on CAN communications blackout in the combination meter, refer to
SYSTEM DIAGRAM
SIGNAL PATH
• BCM transmits high beam request signal to combination meter via CAN communication when headlamp (HI)
is in ON status.
• When combination meter receives high beam request signal, combination meter turns high beam indicator
lamp ON.
LIGHTING CONDITION
When headlamp (HI) is turned ON.
SHUTOFF CONDITION
When headlamp (HI) is turned OFF.
WARNING LAMPS/INDICATOR LAMPS : hill descent control (Downhill Drive Support)
Indicator lamp
INFOID:0000000010728304
DESIGN/PURPOSE
JPNIA1876ZZ
JMLIA4105GB
MWI
SYSTEM
MWI-43
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
The hill descent control indicator lamp warns the driver that
advanced hill descent control function is operating or operational.
BULB CHECK
The hill descent control indicator lamp turns ON and stays ON for 1 second after turning ignition switch.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Not applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIG-
NAL
For actions on CAN communications blackout in the combination meter, refer to
SYSTEM DIAGRAM
SIGNAL PATH
Advanced hill descent control Function Operating or Operational (Condition is Satisfied)
• The ABS actuator and electric unit (control unit) receives a hill descent control switch signal from hill descent
control switch.
• The ABS actuator and electric unit (control unit) transmits a hill descent control indicator lamp signal to the
combination meter via CAN communication according the received hill descent control switch signal.
• The combination meter turns ON the hill descent control indicator lamp when receiving a hill descent control
indicator lamp signal.
Advanced hill descent control Function Operating or Operational (Condition is Not Satisfied)
• The ABS actuator and electric unit (control unit) receives a hill descent control switch signal from hill descent
control switch.
• The ABS actuator and electric unit (control unit) transmits a hill descent control indicator lamp signal to the
combination meter via CAN communication according the received hill descent control switch signal.
• The combination meter blinks the hill descent control indicator lamp when receiving a hill descent control
indicator lamp signal.
LIGHTING CONDITION
When all of the condition listed below are satisfied:
• Ignition switch ON
• When advanced hill descent control function is under operating condition
• advanced hill descent control function operating or operational (condition is satisfied)
BLINKING CONDITION
advanced hill descent control function operating or operational (condition is not satisfied)
SHUTOFF CONDITION
• When the condition listed below are satisfied while the ignition switch ON:
JPNIA1921ZZ
JSFIA2691GB
MWI-44
< SYSTEM DESCRIPTION >
SYSTEM
- Advanced hill descent control function switch OFF (non-operational status)
- A malfunction is detected in the VDC function
- A malfunction is detected in the TCS function
- A malfunction is detected in the hill descent control function.
• Ignition switch OFF
TIMING CHART
WARNING LAMPS/INDICATOR LAMPS : hill start assist (Uphill Start Support) Indica-
tor lamp
INFOID:0000000011004411
DESIGN/PURPOSE
The hill start assist indicator lamp inform the driver that hill start
assist function is operating or operational.
BULB CHECK
Not applicable
SYNCHRONIZATION WITH MASTER WARNING LAMP
Not applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIG-
NAL
For actions on CAN communications blackout in the combination meter, refer to
SYSTEM DIAGRAM
JSFIA2689GB
JSFIA2652ZZ
JSFIA2653GB
MWI
SYSTEM
MWI-45
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SIGNAL PATH
hill start assist Function Operating
• The ABS actuator and electric unit (control unit) transmits a hill start assist indicator lamp signal to the com-
bination meter via CAN communication.
• The combination meter blinks the hill start assist indicator lamp when receiving a hill start assist indicator
lamp signal.
hill start assist Function Operational (Condition is Satisfied)
• The ABS actuator and electric unit (control unit) transmits a hill start assist indicator lamp signal to the com-
bination meter via CAN communication.
• The combination meter turns ON the hill start assist indicator lamp when receiving a hill start assist control
indicator lamp signal.
LIGHTING CONDITION
When all of the condition listed below are satisfied:
• Ignition switch ON
• When hill start assist function is under operating condition
• hill start assist function operational (condition is satisfied)
BLINKING CONDITION
hill start assist function operating
SHUTOFF CONDITION
• When the condition listed below are satisfied while the ignition switch ON:
- A malfunction is detected in the VDC function
- A malfunction is detected in the TCS function
- A malfunction is detected in the hill start assist function.
• Ignition switch OFF
TIMING CHART
WARNING LAMPS/INDICATOR LAMPS : Low Tire Pressure Warning Lamp
INFOID:0000000010767345
DESIGN/PURPOSE
• When tire pressure is low, TPMS (Tire Pressure Monitoring Sys-
tem) turns low tire pressure warning lamp ON to warn the driver.
• When the TPMS detects the system malfunction, the system blinks
(1 minute)
⇒
turns ON low tire pressure warning lamp.
Details for TPMS (Tire Pressure Monitoring System), Refer to
JSFIA2654GB
JPNIA1907ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст