Nissan X-Trail 32. Instruction — part 1186
REAR COMBINATION LAMP
EXL-201
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR COMBINATION LAMP
Exploded View
INFOID:0000000010788897
REMOVAL
Body Side
Back Door Side
Clip
Grommet
Rear combination lamp
(body side)
: Clip
: N·m (kg-m, in-lb)
JMLIA4960GB
EXL-202
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
REAR COMBINATION LAMP
DISASSEMBLY
Rear combination lamp
(back door side)
: Clip
: N·m (kg-m, in-lb)
JMLIA4961GB
REAR COMBINATION LAMP
EXL-203
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR COMBINATION LAMP (BODY SIDE)
REAR COMBINATION LAMP (BODY SIDE) : Removal and Installation
INFOID:0000000010788898
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-9, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Fully open back door.
2.
Remove rear spoiler. Refer to
EXT-64, "Removal and Installation"
.
3.
Remove rear combination lamp (body side) mounting bolts.
4.
Apply protective tapes (A) on the part to protect it from damage.
5.
Remove luggage side lower finisher. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER : Removal
Rear combination lamp
(body side)
Rear combination lamp
(back door side)
Tail lamp bulb
Back-up lamp bulb
Back-up lamp bulb socket
Tail lamp bulb socket
Rear turn signal lamp bulb
Rear turn signal lamp bulb socket
Stop lamp bulb socket
Stop lamp bulb
JMLIA4962ZZ
JMLIA4967ZZ
EXL-204
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
REAR COMBINATION LAMP
6.
Disconnect rear combination lamp (body side) harness connec-
tor .
7.
Pull rear combination lamp (body side) toward vehicle rear to
disengage fixing clips, and then remove rear combination lamp
(body side).
INSTALLATION
Install in the reverse order of removal.
REAR COMBINATION LAMP (BODY SIDE) : Replacement
INFOID:0000000010788899
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
EXL-9, "Precautions for Removing Battery Terminal"
.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned OFF.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
TAIL LAMP BULB
1.
Remove rear combination lamp (body side). Refer to
EXL-203, "REAR COMBINATION LAMP (BODY
SIDE) : Removal and Installation"
.
2.
Rotate tail lamp bulb socket counterclockwise, and then remove tail lamp bulb socket.
3.
Remove tail lamp bulb from tail lamp bulb socket.
STOP LAMP BULB
1.
Remove rear combination lamp (body side). Refer to
EXL-203, "REAR COMBINATION LAMP (BODY
SIDE) : Removal and Installation"
.
2.
Rotate stop lamp bulb socket counterclockwise, and then remove stop lamp bulb socket.
3.
Remove stop lamp bulb from stop lamp bulb socket.
REAR TURN SIGNAL LAMP BULB
1.
Remove rear combination lamp (body side). Refer to
EXL-203, "REAR COMBINATION LAMP (BODY
SIDE) : Removal and Installation"
.
2.
Rotate rear turn signal lamp bulb socket counterclockwise, and then remove rear turn signal lamp bulb
socket.
3.
Remove rear turn signal lamp bulb from rear turn signal lamp bulb socket.
REAR COMBINATION LAMP (BACK DOOR SIDE)
JMLIA4968ZZ
: Clip
JMLIA4969ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст