Nissan X-Trail 32. Instruction — part 1185
HAZARD SWITCH
EXL-197
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HAZARD SWITCH
Removal and Installation
INFOID:0000000010788891
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-9, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Remove center ventilator grille. Refer to following.
• LHD MODELS: Refer to
IP-14, "Removal and Installation"
IP-41, "Removal and Installation"
.
2.
Disengage fixing pawls, and then remove hazard switch from center ventilator grille.
INSTALLATION
Install in the reverse order of removal.
EXL-198
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
SIDE TURN SIGNAL LAMP
SIDE TURN SIGNAL LAMP
Exploded View
INFOID:0000000010788892
.
Removal and Installation
INFOID:0000000010788893
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-9, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Remove door mirror cover. Refer to
MIR-30, "DOOR MIRROR COVER : Removal and Installation"
2.
Remove side turn signal lamp fixing screws.
3.
Remove seal packing
and disconnect side turn signal lamp
harness connector
, and then remove side turn signal lamp
from door mirror housing.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010788894
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-9, "Precautions for Removing Battery Terminal"
.
SIDE TURN SIGNAL LAMP BULB
CAUTION:
Replacement of a single part is not possible due to the adoption of LED bulb. For replacement, replace
side turn signal lamp as a set. Refer to
EXL-198, "Removal and Installation"
JMLIA4978ZZ
HEIGHT SENSOR
EXL-199
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HEIGHT SENSOR
Exploded View
INFOID:0000000010788895
Front height sensor
(with 3 row seat models)
Rear height sensor
: Vehicle front
JMLIA4950GB
EXL-200
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
HEIGHT SENSOR
FRONT HEIGHT SENSOR
FRONT HEIGHT SENSOR : Removal and Installation
INFOID:0000000011008443
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-9, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Disconnect front height sensor harness connector.
2.
Remove front height sensor mounting nuts, and then remove rear height sensor.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Be sure to perform
″
SENSOR INITIALIZE
″
when removing the rear height sensor. Refer to
.
REAR HEIGHT SENSOR
REAR HEIGHT SENSOR : Removal and Installation
INFOID:0000000010788896
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-9, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Disconnect rear height sensor harness connector.
2.
Remove rear height sensor mounting bolts, and then remove rear height sensor.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Be sure to perform
″
SENSOR INITIALIZE
″
when removing the rear height sensor. Refer to
.
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст