Nissan X-Trail 32. Instruction — part 2246
WASHER TANK
WW-91
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Removal and Installation
INFOID:0000000010785459
CAUTION:
When the washer tank is removed, washer fluid may come out so prepare a container to receive the
fluid and never allow fluid to be sprinkled.
REMOVAL
1.
Fully open hood assembly.
2.
Remove washer tank inlet
fixing clip
.
3.
Pull out washer tank inlet from washer tank.
4.
Remove front bumper fascia. Refer to
EXT-15, "Removal and Installation"
.
5.
Remove washer pump. Refer to
WW-92, "Removal and Installation"
6.
Remove washer tank mounting bolt
and nuts
.
7.
Remove washer tank.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Add water up to the top of the washer tank inlet after installing. Check that there is no leakage.
O-ring
Washer tank
: N·m (kg-m, in-lb)
: Vehicle front
JMLIA4856ZZ
JMLIA5005ZZ
WW-92
< REMOVAL AND INSTALLATION >
WASHER PUMP
WASHER PUMP
Exploded View
INFOID:0000000010785460
Removal and Installation
INFOID:0000000010785461
REMOVAL
1.
Remove front fender protector RH. Refer to
EXT-35, "FENDER PROTECTOR : Removal and Installation"
.
Rear washer tube
Packing
Washer pump (front/rear washer)
Washer pump (rear camera washer)
(with around view monitor system)
Front washer tube
Rear camera washer tube
(with around view monitor system)
: Vehicle front
,
,
: Indicates that the part is connected at points with same symbol in actual vehicle.
JMLIA5006ZZ
WASHER PUMP
WW-93
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
2.
Disconnect harness connector
from washer pump
(front/
rear washer), and then disconnect rear washer tube
and front
washer tube
.
NOTE:
Apply a marking either on front washer tube or rear washer tube
when removing them so that the positions can be identified for
installation.
3.
Disconnect harness connector
from washer pump
(rear
camera washer), and then disconnect rear camera washer tube
(with around view monitor system).
4.
Remove washer pump from washer tank.
5.
Remove packing from washer tank.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never twist the packing when installing the washer pump.
• When installing tube to washer pump, be sure to install to front and rear correctly.
• Check that there is no leakage after installation or replace packing with new part if it has been dam-
age.
: Vehicle front
JMLIA4857ZZ
: Vehicle front
JMLIA4858ZZ
WW-94
< REMOVAL AND INSTALLATION >
WASHER NOZZLE AND TUBE
WASHER NOZZLE AND TUBE
Exploded View
INFOID:0000000010785462
WITHOUT AROUND VIEW MONITOR SYSTEM
Rear washer nozzle
Rear washer tube C
Joint
Rear washer tube B
Joint
Rear washer tube A
Washer tank
Front washer tube A
Joint
Front washer tube B
Check valve
Front washer tube C
JMLIA5007ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст