Nissan X-Trail 32. Instruction — part 1602
MWI-90
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
ASCD SPD BLNK
[On/Off]
Blinking status of ASCD or speed limiter set vehicle speed that is judged by the
ASCD status signal received from ECM via CAN communication.
ASCD STATUS
[Off, ASCD, CRUISE, SL ON, SL
SET]
Display status of ASCD and speed limiter status display judged by the ASCD sta-
tus signal received from ECM via CAN communication.
ASCD REQ SPD
[km/h/Off]
ASCD set vehicle speed value judged by the ASCD status signal received from
ECM via CAN communication.
E/O CHG TMNG RST
[On/Off]
Resetting of a remaining distance to the engine oil change time.
ECO DRIVE NAVI
[LEVEL 0 - 30]
Status of ECO pedal guide detected from ECO pedal guide signal received from
ECM via CAN communication.
BATTRY CIRCUIT STATUS
[NORMAL/OPEN]
Status of fuse for shipping mode from shipping mode status signal received from
BCM via CAN communication.
STRG SW INPUT
[SW1-SW10, NO INPUT]
Status of steering switch.
ITS SONAR SET OUTPUT
[NO SW ST, LDW OFF, LDW ON,
BSW OFF, BSW ON, P MV OFF, P
MV ON, SONAR OFF, SONAR ON,
P SEN OFF, P SEN ON, P SEN
FRONT, P BUZ HIGH, P BUZ MED,
P BUZ LOW, P RNG FAR, P RNG
MED, P RNG NEAR]
Status of Driving Aids and Parking Aids set on the information display of the com-
bination meter.
SONAR DET STATUS
[On/Off]
Activation status of sonar system received from sonar control unit via CAN com-
munication.
SONAR WARN
[Off/DEACT/ERROR]
Status of parking sensor error detected from parking sensor error signal is re-
ceived from sonar control unit via CAN communication.
SONAR DET DSP RC
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of center sensor rear detection obstacle from sonar control unit via CAN
communication.
SONAR DET DSP AREA RC
[On/Off]
Activation status of center sensor rear judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.
SONAR DET DSP RL
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of corner sensor rear LH detection obstacle from sonar control unit via CAN
communication.
SONAR DET DSP AREA RL
[On/Off]
Activation status of corner sensor rear LH judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.
SONAR DET DSP RR
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of corner sensor rear RH detection obstacle from sonar control unit via
CAN communication.
SONAR DET DSP AREA RR
[On/Off]
Activation status of corner sensor rear RH judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.
SONAR DET DSP FC
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of center sensor front detection obstacle from sonar control unit via CAN
communication.
SONAR DET DSP AREA FC
[On/Off]
Activation status of center sensor front judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.
SONAR DET DSP FL
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of corner sensor front LH detection obstacle from sonar control unit via
CAN communication.
SONAR DET DSP AREA FL
[On/Off]
Activation status of corner sensor front LH judged from a sonar indicator signal re-
ceived from the sonar control unit via CAN communication.
SONAR DET DSP FR
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of corner sensor front RH detection obstacle from sonar control unit via
CAN communication.
SONAR DET DSP AREA FR
[On/Off]
Activation status of corner sensor front RH judged from a sonar indicator signal
received from the sonar control unit via CAN communication.
SONAR DIST DSP
[Off/stop/30cm/40cm/50cm/60cm]
Sonar of information display of sonar sensor detection distance from sonar control
unit via CAN communication.
Display item [Unit]
MAIN
SIGNALS
Description
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-91
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
WARNING HISTORY
• Stores histories when warning/indicator lamp is turned on.
• “WARNING HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO WARNING HISTORY: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• WARNING HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
Display Item
FCW IND
[Off]
NOTE:
This item is displayed, but cannot be monitored.
LDW IND
[On/Off]
Status of LDW system display detected from meter display signal is received from
front camera unit via CAN communication.
TIRE PRESS FR
[kPa, kg/cm2 or Psi]
The data of front RH tire pressure from BCM via CAN communication.
TIRE PRESS FL
[kPa, kg/cm2 or Psi]
The data of front LH tire pressure from BCM via CAN communication.
TIRE PRESS RR
[kPa, kg/cm2 or Psi]
The data of rear RH tire pressure from BCM via CAN communication.
TIRE PRESS RL
[kPa, kg/cm2 or Psi]
The data of rear LH tire pressure from BCM via CAN communication.
BSW IND
[On/Off]
Status of BSW system display detected from meter display signal is received from
around view monitor control unit via CAN communication.
DIPPED BEAM IND
[On/Off]
Status of dipped beam indicator lamp judged from low beam request signal re-
ceived from BCM via CAN communication.
HI-BEAM ASST IND
[Off]
NOTE:
This item is displayed, but cannot be monitored.
CHASSIS CONTROL WARN
[On/Off]
Status of chassis control display (warning) from chassis control malfunction signal
is received from chassis control module via CAN communication.
LCD
[Off]
NOTE:
This item is displayed, but cannot be monitored.
Display item [Unit]
MAIN
SIGNALS
Description
Display item
Description
ABS W/L
Lighting history of ABS warning lamp.
VDC/TCS IND
Lighting history of VDC OFF indicator lamp.
SLIP IND
Lighting history of VDC warning lamp.
BRAKE W/L
Lighting history of brake warning lamp.
DOOR W/L
Lighting history of door warning.
OIL W/L
Lighting history of engine oil pressure warning.
C-ENG W/L
Lighting history of malfunction indicator lamp (MIL) (yellow).
C-ENG2 W/L
Lighting history of malfunction indicator lamp (MIL) (red).
4WD W/L
Lighting history of 4WD warning.
FUEL W/L
Lighting history of low fuel warning.
AIR PRES W/L
Lighting history of low tire pressure warning lamp.
KEY G/Y W/L
Lighting history of Intelligent key system malfunction.
EPS W/L
Lighting history of electric power steering warning lamp.
MWI-92
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
NOTE:
In items displayed on the CONSULT screen, only those listed in the above table are used.
DDS W/L
Lighting history of hill descent control indicator lamp.
CHAGE W/L
Lighting history of charge warning.
FILTER W/L
Lighting history of water-in-fuel-filter warning lamp.
Display item
Description
MWI
COMBINATION METER
MWI-93
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value
INFOID:0000000010714998
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor Item
Condition
Value/Status
SPEED METER
[mph or km/h]
Ignition switch ON
While driving
Input value of vehicle speed signal
(CAN communication signal)
SPEED OUTPUT
[mph or km/h]
Ignition switch ON
While driving
Output value of vehicle speed sig-
nal (CAN communication signal)
ODO OUTPUT
[mph or km/h]
Ignition switch ON
—
Output value of odometer signal
(CAN communication signal)
TACHO METER
[rpm]
Ignition switch ON
Engine running
Input value of engine speed signal
(CAN communication signal)
FUEL METER
[L]
Ignition switch ON
—
Input value of fuel level sensor sig-
nal
W TEMP METER
[
°
F] or [
°
C]
Ignition switch ON
—
Input value of engine coolant tem-
perature signal (CAN communica-
tion signal)
ABS W/L
Ignition switch ON
ABS warning lamp ON
On
ABS warning lamp OFF
Off
VDC/TCS IND
Ignition switch ON
VDC OFF indicator lamp ON
On
VDC OFF indicator lamp OFF
Off
SLIP IND
Ignition switch ON
VDC warning lamp ON
On
VDC warning lamp OFF
Off
BRAKE W/L
Ignition switch ON
Brake warning lamp ON
On
Brake warning lamp OFF
Off
DOOR W/L
Ignition switch ON
During door open warning indication
On
Except during door open warning indica-
tion
Off
TRUNK/GLAS-H
Ignition switch ON
NOTE:
This item is displayed, but cannot be mon-
itored.
Off
HI-BEAM IND
Ignition switch ON
High beam indicator lamp ON
On
High beam indicator lamp OFF
Off
TURN IND
Ignition switch ON
Turn signal indicator lamp ON
On
Turn signal indicator lamp OFF
Off
FR FOG IND
Ignition switch ON
Front fog lamp indicator lamp ON
On
Front fog lamp indicator lamp OFF
Off
RR FOG IND
Ignition switch ON
Rear fog lamp indicator lamp ON
On
Rear fog lamp indicator lamp OFF
Off
LIGHT IND
Ignition switch ON
Position lamp indicator lamp ON
On
Position lamp indicator lamp OFF
Off
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст