Nissan X-Trail 32. Instruction — part 1805
SE-68
< REMOVAL AND INSTALLATION >
SECOND SEAT (SLIDING TYPE)
2.
Remove seatback side trim and seatback side pad as a set. Refer to
SE-58, "SEATBACK : Disassembly
.
3.
Remove seat cushion outside finisher inner side.
4.
Disengage seat cushion inside finisher inner side fixing clips,
and then remove seat cushion inside finisher inner side.
Seat Cushion Center Finisher
1.
Remove seat cushion trim and seat cushion pad as a set. Refer to
SE-63, "SEAT CUSHION : Disassem-
2.
Remove seatback side trim and seatback side pad as a set. Refer to
SE-58, "SEATBACK : Disassembly
.
3.
Disengage seat cushion center finisher outer fixing pawls, clips,
and then remove seat cushion center finisher outer.
4.
Disengage seat cushion center finisher inner fixing pawl, clip,
and then remove seat cushion center finisher inner.
ASSEMBLY
Assemble in the reverse order of disassembly.
: Clip
JMJIA9695ZZ
: Clip
: Pawl
JMJIA9696ZZ
: Clip
: Pawl
JMJIA9697ZZ
THIRD SEAT
SE-69
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
THIRD SEAT
Exploded View
INFOID:0000000010713150
Lock cover RH
Striker RH
Under finisher RH
Bridge board
Bridge board pipe
Headrest
JMJIA9735GB
SE-70
< REMOVAL AND INSTALLATION >
THIRD SEAT
Removal and Installation
INFOID:0000000010713151
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
REMOVAL
Third Seat
1.
Remove leg covers.
a.
Disengage leg cover fixing pawls while open the leg cover.
b.
Press the leg cover end center while pulling it downward, disen-
gage the leg cover pawl, and then remove.
Seatback silencer
Seatback trim RH
Seatback pad RH
Seat cushion trim RH
Seat cushion pad RH
Seat cushion silencer
Release strap
Lever tube
Bush
Seatback inner cover RH
Seatback inner cover LH
Seat cushion frame
Hinge outer cover RH
Assist stay
Bush
Leg cover
Cap
Seat frame
Hinge outer cover LH
Seat cushion pad LH
Seat cushion trim LH
Seatback pad LH
Seatback trim LH
Seatback frame LH
Seatback board LH
Seat control lever escutcheon
Lock cover LH
Striker LH
Under finisher LH
Center under finisher
Seatback board RH
Headrest holder (free)
Headrest holder (lock)
Seatback frame RH
Seat lock RH
Release strap
Reclining device cover center
Seat look LH
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Pawl
JMJIA9713ZZ
: Pawl
JMJIA9714ZZ
THIRD SEAT
SE-71
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
2.
Insert stopper (A) to portion
of seat frame.
3.
Remove seat fixing bolts.
4.
Fold seatback toward vehicle front.
5.
Pull the strap
for unlocking form floor, and then remove seat.
Striker
1.
Remove lock cover.
2.
Remove striker fixing bolts
, and then remove striker.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Before locking, be sure to drop the right front side locate pin onto the floor.
JMJIA9715ZZ
JMJIA9716ZZ
JMJIA9717ZZ
JMJIA9718ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст