Nissan X-Trail 32. Instruction — part 392
DAS
DIAGNOSIS SYSTEM (AROUND VIEW MONITOR CONTROL UNIT)
DAS-309
< SYSTEM DESCRIPTION >
[PARK ASSIST]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
Function
Description
Read/Write Configuration
Before Replace ECU
Allows the reading of vehicle specification written in around view
monitor control unit to store the specification in CONSULT.
After Replace ECU
Allows the writing of the vehicle information stored in CONSULT
into the around view monitor control unit.
Instruction Configuration
Allows the writing of the vehicle specification into the around view
monitor control unit by hand.
DAS-310
< SYSTEM DESCRIPTION >
[PARK ASSIST]
DIAGNOSIS SYSTEM (SONAR CONTROL UNIT)
DIAGNOSIS SYSTEM (SONAR CONTROL UNIT)
CONSULT Function
INFOID:0000000011025229
APPLICATION ITEMS
CONSULT can display each diagnostic item using the diagnostic test modes shown as follows:
ECU IDENTIFICATION
Displays the part number of the sonar control unit.
SELF-DIAGNOSTIC RESULTS
For details, refer to
Freeze Frame Data (FFD)
The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Test mode
Function
Ecu Identification
Sonar control unit part number can be read.
Self Diagnostic Results
Sonar control unit checks the conditions and displays memorized error.
Data Monitor
Sonar control unit input/output data in real time.
Active Test
Gives a drive signal to a load to check the operation.
Work support
Changes setting of each function.
Configuration
• Read and save the vehicle specification.
• Write the vehicle specification when replacing sonar control unit.
Item name
Display content
ODO/TRIP
METER
(km)
Total driving distance (odometer value) upon DTC detection is displayed.
IGN counter
(0
∼
39)
Numerical value is displayed indicating the number of times that ignition switch is turned ON after the DTC is
detected.
• When “0”is displayed, it indicates that the system is presently malfunctioning.
• When any numerical number other than “0” is displayed, it indicates that system malfunction in the past is de-
tected, but the system is presently normal.
NOTE:
Each time when ignition switch turns OFF
→
ON, numerical number increases from 1
→
2
→
3...38
→
39. When
number of times exceeds 39, numeric display does not increase and 39 is displayed until self-diagnosis is
erased.
Monitor Item
Display/
UNIT
Description
VEHICLE SPEED
km/h
Value of vehicle speed signal.
SONAR C/U POWER
SUPPLY
V
Value of battery voltage (Ignition signal)
SENSOR VOLTAGE
V
Value of sensor voltage
DETECTION MODE
MODE1/
MODE2
NOTE:
This item is displayed, but cannot be monitored.
SW OPRT AFTER IGN
ON
Yes/No
Temporary/permanent OFF operation by the user after turning ON the ignition switch.
DAS
DIAGNOSIS SYSTEM (SONAR CONTROL UNIT)
DAS-311
< SYSTEM DESCRIPTION >
[PARK ASSIST]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SONAR TEMPORARY
OFF
Yes/No
Sonar system is in temporary OFF state.
NOTE:
The user can set temporary OFF by canceling the sonar indicator displayed on the combi-
nation meter.
SONAR PERMANENT
OFF
Yes/No
Sonar system is in permanent OFF state.
NOTE:
The user can set permanent OFF on the settings screen of the combination meter.
P N RANGE
On/Off
Status of shift position
LED
On/Off
NOTE:
This item is displayed, but cannot be monitored.
TRAILER CONNECT
On/Off
NOTE:
This item is displayed, but cannot be monitored.
REVERSE RANGE
On/Off
Status of shift position
SHRT DST FRM RR
SENS
cm
Display the closest approach detection distance that rear sensor detects.
SHRT DST FRM FR
SENS
cm
Display the closest approach detection distance that front sensor detects.
COR[RL]
cm
Distance according to oscillation from corner sensor rear LH and detection by corner sen-
sor rear LH.
COR[RL]->CEN[RL]/
CEN[R]
cm
Distance according to oscillation from corner sensor rear LH and detection by center sen-
sor rear LH.
CEN[RL]/CEN[R]-
>COR[RL]
cm
Distance according to oscillation from center sensor rear LH and detection by corner sen-
sor rear LH.
CEN[RL]/CEN[R]
cm
Distance according to oscillation from center sensor rear LH and detection by center sen-
sor rear LH.
CEN[RL]->CEN[RR]
cm
Distance according to oscillation from center sensor rear LH and detection by center sen-
sor rear RH.
CEN[RR]->CEN[RL]
cm
Distance according to oscillation from center sensor rear RH and detection by center sen-
sor rear LH.
CEN[RR]
cm
Distance according to oscillation from center sensor rear RH and detection by center sen-
sor rear RH.
CEN[RR]/CEN[R]-
>COR[RR]
cm
Distance according to oscillation from center sensor rear RH and detection by corner sen-
sor rear RH.
COR[RR]->CEN[RR]/
CEN[R]
cm
Distance according to oscillation from corner sensor rear RH and detection by center sen-
sor rear RH.
COR[RR]
cm
Distance according to oscillation from corner sensor rear RH and detection by corner sen-
sor rear RH.
COR[FL]
cm
Distance according to oscillation from corner sensor front LH and detection by corner sen-
sor front LH.
COR[FL]->CEN[FL]/
CEN[F]
cm
Distance according to oscillation from corner sensor front LH and detection by center sen-
sor front LH.
CEN[FL]/CEN[F]-
>COR[FL]
cm
Distance according to oscillation from center sensor front LH and detection by corner sen-
sor front LH.
CEN[FL]/CEN[F]
cm
Distance according to oscillation from center sensor front LH and detection by center sen-
sor front LH.
CEN[FL]->CEN[FR]
cm
Distance according to oscillation from center sensor front LH and detection by center sen-
sor front RH.
CEN[FR]->CEN[FL]
cm
Distance according to oscillation from center sensor front RH and detection by center sen-
sor front LH.
CEN[FR]
cm
Distance according to oscillation from center sensor front RH and detection by center sen-
sor front RH.
Monitor Item
Display/
UNIT
Description
DAS-312
< SYSTEM DESCRIPTION >
[PARK ASSIST]
DIAGNOSIS SYSTEM (SONAR CONTROL UNIT)
CEN[FR]/CEN[F]-
>COR[FR]
cm
Distance according to oscillation from center sensor front RH and detection by corner sen-
sor front RH.
COR[FR]->CEN[FR]/
CEN[F]
cm
Distance according to oscillation from corner sensor front RH and detection by center sen-
sor front RH.
COR[FR]
cm
Distance according to oscillation from corner sensor front RH and detection by corner sen-
sor front RH.
RVRB TIME COR[RL]
ms
Reverberating time of corner sensor rear LH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.
RVRB TIME COR[RR]
ms
Reverberating time of corner sensor rear RH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.
RVRB TIME CEN[RL]
ms
Reverberating time of center sensor rear LH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.
RVRB TIME CEN[RR]
ms
Reverberating time of center sensor rear RH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.
RVRB TIME COR[FL]
ms
Reverberating time of corner sensor front LH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.
RVRB TIME COR[FR]
ms
Reverberating time of corner sensor front RH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.
RVRB TIME CEN[FL]
ms
Reverberating time of center sensor front LH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.
RVRB TIME CEN[FR]
ms
Reverberating time of center sensor front RH.
NOTE:
Reverberating time is a period of time while sensor vibrates by super sonic waves after os-
cillating super sonic waves.
FRONT BUZZER
On/Off
The operating state of buzzer (frontward) is displayed.
• On: Buzzer (frontward) operation
• Off: Buzzer (frontward) non-operation
REAR BUZZER
On/Off
The operating state of buzzer (backward) is displayed.
• On: Buzzer (backward) operation
• Off: Buzzer (backward) non-operation
PSM SYSTEM
NORMAL/
ERROR
The state of a parking space measurement system is displayed.
PARKING MODE
PARA/PER
The parking method is displayed.
• PARA: Parallel parking
• PER: Perpendicular parking
PSM ACTIVATION
On/Off
The operating state of parking space measurement system is displayed.
PARKING DIRECTION
RIGHT/
LEFT
Parking position is displayed.
PARKING START POSI-
TION
NG/OK
Detection of a parking starting position is displayed.
PARKING SPACE DE-
TECT
NON/DE-
TECT
The detection state of a parking space is displayed.
Monitor Item
Display/
UNIT
Description
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст