Nissan X-Trail 32. Instruction — part 1767
RF-54
< REMOVAL AND INSTALLATION >
SUNSHADE MOTOR ASSEMBLY
SUNSHADE MOTOR ASSEMBLY
Exploded View
INFOID:0000000010735434
Front sunroof bracket RH
Glass lid
Wind deflector
Rear sunroof bracket RH
Side trim RH
Sunroof unit assembly
Front drain hose RH
Sunroof motor assembly
Front drain connector RH
Harness connector assembly
Front drain connector LH
Sunshade motor assembly
Front drain hose LH
Side trim LH
Rear sunroof bracket LH
Sunshade
Rear drain connector LH
Rear drain hose LH
JMKIB2824GB
SUNSHADE MOTOR ASSEMBLY
RF-55
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
Removal and Installation
INFOID:0000000010735435
REMOVAL
CAUTION:
• Before removing sunshade motor, check that sunshade is fully opened.
• After removing sunshade motor, never attempt to rotate sunshade motor assembly as a single unit.
1.
Disconnect battery cable from negative terminal.
2.
Remove headlining to make work space. Refer to
INT-37, "Removal and Installation"
3.
Disconnect harness connector
from sunshade motor assem-
bly.
4.
Remove sunshade motor assembly fixing screws
, and then
remove sunshade motor assembly.
INSTALLATION
CAUTION:
Before installing the sunshade motor assembly, always place the link and wire assembly in the sym-
metrical and fully opened position.
1.
Move the sunshade motor assembly laterally a little so that the gear is completely engaged into the wire
on the sunroof unit assembly and mounting surface becomes parallel. Then secure the sunshade motor
assembly with screws.
2.
Install headlining.
NOTE:
After installation sunshade motor assembly, perform additional service. Refer to
Rear drain hose RH
Rear drain connector RH
Front sunroof bracket LH
Rear sunroof glass
Drain assembly
: Clip
: N·m (kg-m, in-lb)
,
,
,
,
,
,
,
,
,
: Indicates that the part is connected at points with same symbol in actual vehicle.
JMKIB2839ZZ
RF-56
< REMOVAL AND INSTALLATION >
SUNROOF UNIT ASSEMBLY
SUNROOF UNIT ASSEMBLY
Exploded View
INFOID:0000000010735436
Front sunroof bracket RH
Glass lid
Wind deflector
Rear sunroof bracket RH
Side trim RH
Sunroof unit assembly
Front drain hose RH
Sunroof motor assembly
Front drain connector RH
Harness connector assembly
Front drain connector LH
Sunshade motor assembly
Front drain hose LH
Side trim LH
Rear sunroof bracket LH
Sunshade
Rear drain connector LH
Rear drain hose LH
JMKIB2824GB
SUNROOF UNIT ASSEMBLY
RF-57
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
Removal and Installation
INFOID:0000000010735437
REMOVAL
CAUTION:
• Always work with a helper.
• When removing/installing sunroof unit, use cloths to protect the seats and trim from damage.
1.
Remove glass lid. Refer to
RF-47, "Removal and Installation"
2.
Remove headlining. Refer to
INT-37, "Removal and Installation"
3.
Disconnect harness connector.
4.
Disconnect front drain hoses
and rear drain hoses
from sunroof unit assembly
.
5.
Remove front sunroof bracket mounting bolts, and then remove front sunroof brackets.
6.
Remove rear sunroof bracket mounting bolts, and then remove rear sunroof brackets.
7.
Remove sunroof unit assembly mounting nuts and bolts.
8.
Remove sunroof unit assembly from back door opening.
INSTALLATION
1.
Temporarily tighten the mounting nuts to the front end and side rail of sunroof unit assembly.
2.
Temporarily tighten the mounting bolts to the front sunroof brackets and rear sunroof brackets.
3.
Tighten the front end and side rail mounting nuts diagonally in order.
CAUTION:
Install sunroof unit assembly evenly without any distortion on sunroof unit assembly.
4.
Tighten the mounting bolts to the rear sunroof brackets sunroof unit side, and then tighten the mounting
bolts to the rear sunroof brackets vehicle side.
5.
Tighten the mounting bolts to the front sunroof brackets.
6.
Connect front drain hoses and rear drain hoses.
7.
Connect harness connector.
8.
Install headlining. Refer to
INT-37, "Removal and Installation"
.
9.
Install glass lid. Refer to
RF-47, "Removal and Installation"
NOTE:
• After installation, perform fitting adjustment. Refer to
.
• After installation of sunroof unit assembly, perform additional service. Refer to
Disassembly and Assembly
INFOID:0000000010735438
DISASSEMBLY
Rear drain hose RH
Rear drain connector RH
Front sunroof bracket LH
Rear sunroof glass
Drain assembly
: Clip
: N·m (kg-m, in-lb)
,
,
,
,
,
,
,
,
,
: Indicates that the part is connected at points with same symbol in actual vehicle.
: Vehicle front
JMKIB2806ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст