Nissan X-Trail 32. Instruction — part 1595
MWI-62
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM DIAGRAM
*: For DTCs that the VDC warning lamp turns ON, refer to
SIGNAL PATH
When Operating VDC Function, TCS Function, Brake Limited Slip Differential (BLSD) Function
• The ABS actuator and electric unit (control unit) transmits a VDC warning lamp signal to the combination
meter via CAN communication when operating in the VDC function, TCS function, or brake limited slip differ-
ential (BLSD) function.
• The combination meter blinks the VDC warning lamp when receiving a VDC warning lamp signal.
When VDC Function, TCS Function, ABS Function, EBD Function, Brake Limited Slip Differential (BLSD) Function,
Brake Assist Function, Brake Force Distribution Function, hill start assist Function, advanced hill decent control Func-
tion Are In Abnormal State
• The ABS actuator and electric unit (control unit) transmits a VDC warning lamp signal to the combination
meter via CAN communication when detecting a malfunction in the VDC function, TCS function, brake lim-
ited slip differential (BLSD) function, brake assist function, hill start assist function or brake force distribution
function
• The combination meter turns ON the VDC warning lamp when receiving a VDC warning lamp signal.
• For the relationship between warning lamp and DTC, refer to
LIGHTING CONDITION
• A malfunction is detected in the VDC function, TCS function, ABS function, EBD function, brake limited slip
differential (BLSD) function, brake assist function, brake force distribution function, hill start assist function or
advanced hill decent control function of the ABS actuator and electric unit (control unit).
• For the relationship between warning lamp and DTC, refer to
BLINKING CONDITION
When VDC function, TCS function, or brake limited slip differential (BLSD) function is under operating condi-
tions.
SHUTOFF CONDITION
• When the condition listed below is satisfied while the ignition switch ON:
- Erase DTC
• When VDC function, TCS function, or brake limited slip differential (BLSD) function is not under operating
conditions.
• The ignition switch is in a position other than ON.
JSFIA1754GB
MWI
SYSTEM
MWI-63
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TIMING CHART
WARNING LAMPS/INDICATOR LAMPS : Water-in-fuel-filter warning lamp
INFOID:0000000010775881
DESIGN/PURPOSE
When water is accumulated in the fuel filter, the water-in-fuel-filter
warning lamp turns ON to warn the driver that water must be
drained.
NOTE:
For the method of draining water from fuel filter, refer to
"Draining Water from Fuel Filter"
.
BULB CHECK
Not required.
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIG-
NAL
For the operation for CAN communications blackout or abnormal signal reception, refer to
.
SYSTEM DIAGRAM
SIGNAL PATH
• ECM reads a signal transmitted from the water level sensor and transmits the signal to the combination
meter via CAN communication.
• The combination meter turns ON the water-in-fuel-filter warning lamp, according to a water-in-fuel-filter
warning lamp signal received from ECM via CAN communication.
LIGHTING CONDITION
JSFIA1755GB
JPNIA1924ZZ
JSBIA5133GB
MWI-64
< SYSTEM DESCRIPTION >
SYSTEM
When all of the following conditions are satisfied:
• Ignition switch ON
• Fuel filter water level is the approximately 50 ml (1.8 Imp fl oz) or more. (Water-in-fuel-filter warning lamp
signal: ON)
SHUTOFF CONDITION
When any of the following condition is satisfied:
• Ignition switch OFF
• Fuel filter water level is less than the approximately 50 ml (1.8 Imp fl oz). (Water-in-fuel-filter warning lamp
signal: OFF)
WARNING/INDICATOR (ON INFORMATION DISPLAY)
WARNING/INDICATOR (ON INFORMATION DISPLAY) : Alert
INFOID:0000000010714989
DESIGN/PURPOSE
To warn the driver when driving the vehicle more than set value time.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Not applicable
SYSTEM DIAGRAM
SIGNAL PATH
Combination meter will operate the timer after turned ignition switch ON.
WARNING/INDICATOR OPERATING CONDITION
When all of the following conditions are satisfied:
• Ignition switch ON
• When time exceeds a set value
WARNING/INDICATOR CANCEL CONDITION
• Ignition switch OFF
• Press the back switch or press the enter switch downward
Symbol
Massage
Time for a driver break?
JSNIA5774ZZ
JSNIA7297GB
MWI
SYSTEM
MWI-65
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TIMING CHART
WARNING/INDICATOR (ON INFORMATION DISPLAY) : Maintenance
INFOID:0000000010714990
DESIGN/PURPOSE
The combination meter alerts the driver maintenance items (engine oil, oil filter, tires or other) when mileage
exceeds a set value.
JSNIA5802ZZ
Symbol
Message
Oil and Filler
*1
Filler
*2
JSNIA5884ZZ
JPNIA1881ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст