Nissan X-Trail 32. Instruction — part 70
AV-272
< REMOVAL AND INSTALLATION >
[WITH NAVIGATION]
MICROPHONE
MICROPHONE
Removal and Installation
INFOID:0000000010714927
REMOVAL
1.
Remove the map lamp assembly. Refer to
2.
Disconnect the microphone connector
from the map lamp
assembly .
3.
Release the microphone pawls, then remove the microphone
.
INSTALLATION
Installation is in the reverse order of removal.
: Pawl
ALNIA1366ZZ
AV
STEERING SWITCH
AV-273
< REMOVAL AND INSTALLATION >
[WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING SWITCH
Removal and Installation
INFOID:0000000010714928
NOTE:
Always remove steering switch together with steering wheel.
AV-274
< REMOVAL AND INSTALLATION >
[WITH NAVIGATION]
STEERING ANGLE SENSOR
STEERING ANGLE SENSOR
Exploded View
INFOID:0000000010714929
DISASSEMBLY
Removal and Installation
INFOID:0000000010714930
REMOVAL
1.
Remove spiral cable. Refer to
.
2.
Remove steering angle sensor from spiral cable.
INSTALLATION
1.
Install in the reverse order of removal.
2.
Perform steering angle sensor neutral position adjustment. Refer to
.
Spiral cable
Steering angle sensor
JSNIA0135ZZ
AV
ROOF ANTENNA
AV-275
< REMOVAL AND INSTALLATION >
[WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ROOF ANTENNA
Exploded View
INFOID:0000000010714931
Removal and Installation
INFOID:0000000010714932
REMOVAL
1.
Remove the antenna rod.
2.
Remove the headlining assembly. Refer to
INT-37, "Removal and Installation"
3.
Remove the mounting nut to remove the antenna base from the roof panel.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
If the antenna base mounting nut is tightened looser than the specified torque, then this will lower the
sensitivity of the antenna. On the other hand, if the nut is tightened tighter than the specified torque,
then this will deform the roof panel.
Antenna rod
Antenna base
: N·m (kg-m, in-lb)
JSNIA6913ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст