Nissan X-Trail 32. Instruction — part 69
AV-268
< REMOVAL AND INSTALLATION >
[WITH NAVIGATION]
AROUND VIEW MONITOR CONTROL UNIT
AROUND VIEW MONITOR CONTROL UNIT
Removal and Installation
INFOID:0000000010714923
REMOVAL
CAUTION:
Before replacing around view monitor control unit, perform “Read/Write Configuration” to save or
print current vehicle specification. For details, refer to
AV-158, "ADDITIONAL SERVICE WHEN
REPLACING AROUND VIEW MONITOR CONTROL UNIT : Description"
.
1.
Remove the glove box. Refer to
(LHD models),
(RHD
models).
2.
Remove the around view monitor control unit bracket mounting
screws
, and disconnect the harness connector, And then
around view monitor control unit assembly
is raised upwards
and remove the pawls
.
3.
Remove the around view monitor control unit assembly from the
vehicle.
4.
Remove the around view monitor control unit mounting screws,
And then remove the around view monitor control unit from
bracket.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Must be perform additional service when replacing around view monitor control unit. Refer to
158, "ADDITIONAL SERVICE WHEN REPLACING AROUND VIEW MONITOR CONTROL UNIT :
Description"
• Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.).
JSNIA6758ZZ
AV
FRONT CAMERA
AV-269
< REMOVAL AND INSTALLATION >
[WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT CAMERA
Removal and Installation
INFOID:0000000010714924
REMOVAL
1.
Remove the front grille. Refer to
EXT-22, "Removal and Installation"
2.
Remove the front camera mounting screws
, And then remove
the front camera
from the front grille.
INSTALLATION
1.
Install in the reverse order of removal.
2.
Perform camera image calibration. Refer to
AV-161, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.).
JSNIA6759ZZ
AV-270
< REMOVAL AND INSTALLATION >
[WITH NAVIGATION]
REAR CAMERA
REAR CAMERA
Removal and Installation
INFOID:0000000010714925
REMOVAL
1.
Remove the back door finisher. Refer to
2.
Remove the back door finisher cap. Refer to
.
3.
Remove the air tube, washer tube
and rear camera harness
connector .
4.
Push camera
in the direction shown by arrow, compress the pawl
, and disengage pawl
to remove
rear camera from the back door.
INSTALLATION
1.
Install in the reverse order of removal.
2.
Perform camera image calibration (around view monitor system). Refer to
ERA IMAGE (AROUND VIEW MONITOR) : Description"
.
3.
Perform calibrating camera image (LDW/BSW system). Refer to
.
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.).
JSNIA6761ZZ
JSNIA6762ZZ
AV
SIDE CAMERA
AV-271
< REMOVAL AND INSTALLATION >
[WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SIDE CAMERA
Removal and Installation
INFOID:0000000010714926
REMOVAL
1.
Remove the door mirror finisher. Refer to
2.
Remove the side camera mounting screws
, And than remove
the side camera
from the door mirror finisher.
INSTALLATION
1.
Install in the reverse order of removal.
2.
Perform camera image calibration. Refer to
AV-161, "CALIBRATING CAMERA IMAGE (AROUND VIEW
.
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.).
JSNIA6760ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст