Nissan Teana J32. Instruction — part 348
TAKE AWAY WARNING DOES NOT OPERATE
DLK-175
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
7.
CHECK KEY SLOT ILLUMINATION
Check key slot illumination.
Refer to
DLK-88, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 8.
NO
>> Repair or replace the malfunctioning parts.
8.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
ANY DOOR OPEN TO ALL DOORS CLOSED
ANY DOOR OPEN TO ALL DOORS CLOSED : Description
INFOID:0000000003795026
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-31, "WARNING FUNCTION : System
.
• Door lock function is normal.
ANY DOOR OPEN TO ALL DOORS CLOSED : Diagnosis Procedure
INFOID:0000000003795027
1.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-57, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-93, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(trunk room).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
PUSH-BUTTON IGNITION SWITCH OPERATION
DLK-176
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
TAKE AWAY WARNING DOES NOT OPERATE
PUSH-BUTTON IGNITION SWITCH OPERATION : Description
INFOID:0000000003795028
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-31, "WARNING FUNCTION : System
.
• Door lock function is normal.
PUSH-BUTTON IGNITION SWITCH OPERATION : Diagnosis Procedure
INFOID:0000000003795029
1.
CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
>> GO TO 2.
NO
>> Check DTC for BCM. Refer to
2.
CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to
PCS-63, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to
DLK-94, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-93, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(console).
(trunk room).
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
INTELLIGENT KEY IS REMOVED FROM KEY SLOT
INTELLIGENT KEY IS REMOVED FROM KEY SLOT : Description
INFOID:0000000003795032
NOTE:
TAKE AWAY WARNING DOES NOT OPERATE
DLK-177
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-31, "WARNING FUNCTION : System
.
• Door lock function is normal.
INTELLIGENT KEY IS REMOVED FROM KEY SLOT : Diagnosis Procedure
INFOID:0000000003795033
1.
CHECK KEY SLOT
Check key slot.
Refer to
DLK-86, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-93, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(trunk room).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK KEY SLOT ILLUMINATION
Check key slot illumination.
Refer to
DLK-88, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-178
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
Description
INFOID:0000000003795034
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-31, "WARNING FUNCTION : System
.
Diagnosis Procedure
INFOID:0000000003795035
1.
CHECK “LO- BATT OF KEY FOB WARN” SETTING IN “WORK SUPPORT”
Check “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.
Refer to
DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.
2.
CHECK INTELLIGENT KEY BATTERY
Check Intelligent Key battery.
Refer to
DLK-84, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to
DLK-93, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(console).
(trunk room).
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK KEY SLOT ILLUMINATION
Check key slot illumination.
Refer to
DLK-88, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст