Nissan Teana J32. Instruction — part 349
DOOR LOCK OPERATION WARNING DOES NOT OPERATE WITH DOOR RE-
QUEST SWITCH
DLK-179
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK OPERATION WARNING DOES NOT OPERATE WITH DOOR
REQUEST SWITCH
Description
INFOID:0000000003795036
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-31, "WARNING FUNCTION : System
.
Diagnosis Procedure
INFOID:0000000003795037
1.
CHECK DOOR LOCK FUNCTION
Check door lock function by door request switch.
Does door lock/unlock with door request switch?
YES
>> GO TO 2.
NO
>> • Go to
DLK-161, "DRIVER SIDE : Description"
(driver side).
• Go to
DLK-161, "PASSENGER SIDE : Description"
(passenger side).
• Go to
DLK-162, "TRUNK : Description"
(trunk room).
2.
CHECK DOOR SWITCH
Check door switch (driver side).
Refer to
DLK-57, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-82, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to
(trunk room).
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-180
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
KEY ID WARNING DOES NOT OPERATE
KEY ID WARNING DOES NOT OPERATE
Description
INFOID:0000000003795038
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-31, "WARNING FUNCTION : System
.
Diagnosis Procedure
INFOID:0000000003795039
1.
CHECK INTELLIGENT KEY
Check Intelligent Key.
Refer to
DLK-84, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK COMBINATION METER DISPLAY FUNCTION
Check combination meter display function.
Refer to
DLK-93, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
DLK-181
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
Description
INFOID:0000000003795040
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
DLK-31, "WARNING FUNCTION : System
.
Diagnosis Procedure
INFOID:0000000003795041
1.
CHECK INTELLIGENT KEY
Check Intelligent Key.
Refer to
DLK-84, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK COMBINATION METER DISPLAY FUNCTION
Check combination meter display function.
Refer to
DLK-93, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-182
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
SQUEAK AND RATTLE TROUBLE DIAGNOSES
SQUEAK AND RATTLE TROUBLE DIAGNOSES
Work Flow
INFOID:0000000003941377
CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diag-
nostic Worksheet during the interview to document the facts and conditions when the noise occurs and any of
the customer's comments; refer to
DLK-186, "Diagnostic Worksheet"
. This information is necessary to dupli-
cate the conditions that exist when the noise occurs.
• The customer may not be able to provide a detailed description or the location of the noise. Attempt to obtain
all the facts and conditions that exist when the noise occurs (or does not occur).
• If there is more than one noise in the vehicle, be sure to diagnose and repair the noise that the customer is
concerned about. This can be accomplished by a test drive with the customer.
• After identifying the type of noise, isolate the noise in terms of its characteristics. The noise characteristics
are provided so the customer, service adviser and technician are all speaking the same language when
defining the noise.
• Squeak – (Like tennis shoes on a clean floor)
Squeak characteristics include the light contact/fast movement/brought on by road conditions/hard surfaces
= higher pitch noise/softer surfaces = lower pitch noises/edge to surface = chirping
• Creak – (Like walking on an old wooden floor)
Creak characteristics include firm contact/slow movement/twisting with a rotational movement/pitch depen-
dent on materials/often brought on by activity.
• Rattle – (Like shaking a baby rattle)
Rattle characteristics include the fast repeated contact/vibration or similar movement/loose parts/missing
clip or fastener/incorrect clearance.
• Knock – (Like a knock on a door)
Knock characteristics include hollow sounding/sometimes repeating/often brought on by driver action.
• Tick – (Like a clock second hand)
Tick characteristics include gentle contacting of light materials/loose components/can be caused by driver
action or road conditions.
• Thump – (Heavy, muffled knock noise)
Thump characteristics include softer knock/dead sound often brought on by activity.
• Buzz – (Like a bumble bee)
Buzz characteristics include high frequency rattle/firm contact.
• Often the degree of acceptable noise level will vary depending upon the person. A noise that a technician
may judge as acceptable may be very irritating to the customer.
• Weather conditions, especially humidity and temperature, may have a great effect on noise level.
DUPLICATE THE NOISE AND TEST DRIVE
If possible, drive the vehicle with the customer until the noise is duplicated. Note any additional information on
the Diagnostic Worksheet regarding the conditions or location of the noise. This information can be used to
duplicate the same conditions when the repair is reconfirmed.
SBT842
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст