Nissan Teana J32. Instruction — part 4
INSPECTION AND ADJUSTMENT
ADP-9
< BASIC INSPECTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MEMORY STORING : Special Repair Requirement
INFOID:0000000003759065
Memory Storage Procedure
Two positions for the driver seat can be stored for memory operation by the following procedure.
1.
STEP 1
Shift selector lever to the P position.
>> GO TO 2.
2.
STEP 2
Turn ignition switch ON.
>> GO TO 3.
3.
STEP 3
Adjust driver seat position instructionly.
>> GO TO 4.
4.
STEP 4
1.
Push set switch.
NOTE:
• Memory indicator for which driver seat position is already retained in memory is illuminated for 5 sec-
onds.
• Memory indicator for which driver seat position is not retained in memory is illuminated for 0.5 seconds.
2.
Push the memory switch (1 or 2) for at least 1 second within 5 seconds after pushing the set switch.
NOTE:
• When entering driver seat positions into blank memory, memory indicator turns ON for 5 seconds.
• When changing driver seat positions, memory indicator turns OFF for 0.5 seconds, then turns ON for 5
seconds.
NOTE:
If memory is stored in the same memory switch, the previous memory will be deleted.
Do you need to link Intelligent Keys?
YES
>> GO TO 5.
NO
>> END
5.
STEP 6
Push the Intelligent Key unlock button within 5 seconds after pushing memory switch (while the memory indi-
cator is ON).
>> GO TO 6.
6.
STEP 7
Confirm the operation of each part with memory operation and Intelligent Key interlock operation.
>> END
SYSTEM SETTING
SYSTEM SETTING : Description
INFOID:0000000003759066
The settings of the automatic driving positioner system can be changed, using CONSULT-III, the display unit
in the center of the instrument panel and the set switch. Always check the settings before and after discon-
necting the battery terminal or replacing driver seat control unit.
Setting Change
ADP-10
< BASIC INSPECTION >
INSPECTION AND ADJUSTMENT
×
: Applicable
SYSTEM SETTING : Special Repair Requirement
INFOID:0000000003759067
1.
CHOOSE METHOD
There are three ways of setting methods.
Which method do you choose?
With display>>GO TO 2.
With set switch>>GO TO 4.
With CONSULT-III>>GO TO 6.
2.
WITH DISPLAY - STEP 1
Turn ignition switch ON.
>> GO TO 3.
3.
WITH DISPLAY - STEP 2
1.
Push “SETTING” button.
2.
Select “Comfort & Conv.”.
3.
Select “Slide Driver
′
s Seat Back ON Exit” on display, then push
-
Slide Driver's Seat Back On Exit: Entry/exit assist (seat)
>> END
4.
WITH SET SWITCH - STEP 1
Turn ignition switch OFF.
>> GO TO 5.
5.
WITH SET SWITCH - STEP 2
Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
• Entry/exit assist (seat) are ON: Memory switch indicator blinks two times.
• Entry/exit assist (seat) are OFF: Memory switch indicator blinks once.
>> END
6.
WITH CONSULT-III - STEP 1
Select “Work support”.
>> GO TO 7.
7.
WITH CONSULT-III - STEP 2
1.
Select “EXIT SEAT SLIDE SETTING”, or “SEAT SLIDE VOLUME SET” then touch display to change
between ON and OFF.
-
EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
2.
Then touch “OK”.
Item
Content
CON-
SULT
–III
Display
Set
switch
Factory
setting
Amount of seat sliding for
entry/exit assist
The amount of seat sliding for entry/exit assist can
be selected from 3 items.
[40mm/80mm/150mm]
x
—
—
40mm
Entry/exit assist
(seat)
Entry/exit assist (seat) can be selected:
ON (operated) – OFF (not operated)
x
x
x
ON
Reset custom settings
All settings can be set to default (factory setting).
—
x
—
—
INSPECTION AND ADJUSTMENT
ADP-11
< BASIC INSPECTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
>> END
ADP-12
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
FUNCTION DIAGNOSIS
AUTOMATIC DRIVE POSITIONER SYSTEM
AUTOMATIC DRIVE POSITIONER SYSTEM
AUTOMATIC DRIVE POSITIONER SYSTEM : System Diagram
INFOID:0000000003759068
AUTOMATIC DRIVE POSITIONER SYSTEM : System Description
INFOID:0000000003759069
OUTLINE
The system automatically moves the driver seat position by the driver seat control unit.
SLEEP MODE
JMJIA1812GB
Function Description
Instruction function
The driving position (seat) can be adjusted by using the power seat switch
Memory function
The seat can be adjusted to the stored driving position by pressing seat memory
switch (1 or 2)
Entry/Exit assist function
Exit
On exit, the seat moves backward
Entry
On entry, the seat returns from the exiting position to the previous driving position
Intelligent Key interlock function
Perform memory operation, exiting operation and entry operation by Intelligent Key
unlock operation or driver side door request switch unlock operation
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст