Nissan Teana J32. Instruction — part 594
EXL-346
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
FRONT FOG LAMP
FRONT FOG LAMP
Exploded View
INFOID:0000000003894360
Removal and Installation
INFOID:0000000003894361
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the front fender protector. Keep a service area. Refer to
.
2.
Remove the front fog lamp connector.
3.
Remove the mounting nuts. And then remove the front fog lamp.
NOTE:
Never remove a front fog lamp bracket, when the front fog lamp is replaced.
INSTALLATION
Installation is the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
Replacement
INFOID:0000000003894362
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
FRONT FOG LAMP BULB
1.
Remove the front fender protector. Keep a service area. Refer to
.
1.
Front fog lamp bracket
2.
Front fog lamp
JPLIA1090ZZ
FRONT FOG LAMP
EXL-347
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
2.
Remove the front fog lamp bulb connector (1).
3.
Rotate the bulb (2) counterclockwise and unlock it.
JPLIA1091ZZ
EXL-348
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
OPTICAL SENSOR
OPTICAL SENSOR
Exploded View
INFOID:0000000003894363
Removal and Installation
INFOID:0000000003894364
REMOVAL
1.
Insert an appropriate tool between the optical sensor and the speaker grille (RH). Pull out the optical sen-
sor upward.
2.
Disconnect the optical sensor connector. And then remove the optical sensor.
INSTALLATION
Install in the reverse order of removal.
1.
Optical sensor
JPLIA1092ZZ
LIGHTING & TURN SIGNAL SWITCH
EXL-349
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LIGHTING & TURN SIGNAL SWITCH
Exploded View
INFOID:0000000003894365
Removal and Installation
INFOID:0000000003894366
Lighting & turn signal switch is integrated in the combination switch. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст