Nissan Teana J32. Instruction — part 595
EXL-350
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
HEADLAMP AIMING SWITCH
HEADLAMP AIMING SWITCH
Exploded View
INFOID:0000000003773632
Removal and Installation
INFOID:0000000003773633
REMOVAL
1.
Remove the instrument driver lower panel. Refer to
.
2.
Disengage the pawls. And then remove the headlamp aiming switch.
INSTALLATION
Install in the reverse order of removal.
1.
Headlamp aiming switch
A.
Pawls
JPLIA1106ZZ
HAZARD SWITCH
EXL-351
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HAZARD SWITCH
Exploded View
INFOID:0000000003894367
Removal and Installation
INFOID:0000000003894368
REMOVAL
1.
Remove the cluster lid D. Refer to
2.
Disengage the pawls. And then remove the hazard switch.
INSTALLATION
Install in the reverse order of removal.
1.
Hazard switch
2.
Cluster lid D
A.
Pawls
JPLIA1093ZZ
EXL-352
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
SIDE TURN SIGNAL LAMP
SIDE TURN SIGNAL LAMP
Exploded View
INFOID:0000000003894369
Removal and Installation
INFOID:0000000003894370
CAUTION:
Disconnect battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the door mirror glass. Refer to
MIR-18, "GLASS MIRROR : Exploded View"
.
2.
Remove the door mirror outer cover. Refer to
MIR-19, "DOOR MIRROR COVER : Exploded View"
.
3.
Remove the door mirror actuator mounting screws (A) and (B).
And then remove the side turn signal lamp mounting screw (C).
4.
Remove the door mirror under cover. Refer to
MIR-19, "DOOR MIRROR COVER : Exploded View"
.
5.
Remove the screws (A) and connector (1). And then remove the
side turn signal lamp (2).
INSTALLATION
1.
Side turn signal lamp
2.
Door mirror under cover
JPLIA1094ZZ
JPLIA1095ZZ
JPLIA1096ZZ
SIDE TURN SIGNAL LAMP
EXL-353
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст