Nissan Teana J32. Instruction — part 319
DOOR SWITCH
DLK-59
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-78, "Removal and Installation"
NO
>> Repair or replace harness.
3.
CHECK DOOR SWITCH
DLK-59, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace malfunctioning door switch. Refer to
DLK-234, "Removal and Installation"
4.
CHECK INTERMITTENT INCIDENT
GI-35, "Intermittent Incident"
.
>> INSPECTION END
Component Inspection
INFOID:0000000003896358
1.
CHECK DOOR SWITCH
1.
Turn ignition switch OFF.
2.
Disconnect malfunction front door switch connector.
3.
Check front door switch.
Is the inspection result normal?
YES
>> Door switch is OK.
NO
>> Replace malfunctioning door switch. Refer to
DLK-234, "Removal and Installation"
BCM
Ground
Continuity
Connector
Terminal
M123
150 (Driver side)
Not existed
124 (Passenger side)
M121
69 (Rear LH)
68 (Rear RH)
(+)
(-)
Condition
Continuity
Door switch
Connector
Terminal
Driver side
B34
2
Ground
part of front
door switch
Door switch
pressed
Not exists
released
Exists
Passenger side
B220
pressed
Not exists
released
Exists
Rear LH
B71
pressed
Not exists
released
Exists
Rear RH
B221
pressed
Not exists
released
Exists
DLK-60
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR LOCK AND UNLOCK SWITCH
DOOR LOCK AND UNLOCK SWITCH
Description
INFOID:0000000003794842
Transmits door lock/unlock operation to BCM.
Component Function Check
INFOID:0000000003794843
1.
CHECK FUNCTION
With CONSULT-III
Check (“CDL LOCK SW ”, “CDL UNLOCK SW”) in Data Monitor mode with CONSULT-III.
Is the inspection result normal?
YES
>> Door lock and unlock switch is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000003794844
1.
CHECK POWER WINDOW MAIN SWITCH
1.
Turn ignition switch ON.
2.
Check door lock and unlock operation.
Is the inspection result normal?
YES
>> Replace power window main switch.
NO
>> Go to
.
Monitor item
Condition
CDL LOCK SW
LOCK
: ON
UNLOCK
: OFF
CDL UNLOCK SW
LOCK
: OFF
UNLOCK
: ON
DOOR LOCK ACTUATOR
DLK-61
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK ACTUATOR
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000003794848
Locks/unlocks the door with the signal from BCM.
DRIVER SIDE : Component Function Check
INFOID:0000000003794849
1.
CHECK FUNCTION
1.
Use CONSULT-III to perform Active Test (“DOOR LOCK”).
2.
Touch “ALL LCK” or “ALL UNLK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-61, "DRIVER SIDE : Diagnosis Procedure"
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000003794850
1.
CHECK DOOR LOCK ACTUATOR OUTPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect front door lock assembly (driver side) connector.
3.
Check voltage between front door lock assembly (driver side) harness connector and ground.
Is the inspection result normal?
YES
>> Replace front door lock assembly (driver side). Refer to
DLK-202, "DOOR ASSEMBLY : Removal
.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1.
Disconnect BCM connector.
2.
Check continuity between BCM harness connector and front door lock assembly (driver side) harness
connector.
3.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-78, "Removal and Installation"
NO
>> Repair or replace harness.
PASSENGER SIDE
(+)
(–)
Condition
Voltage (V)
(Approx.)
Front door lock assembly (driver side)
Connector
Terminal
D9
1
Ground
Door lock and un-
lock switch
LOCK
0
→
Battery voltage
→
0
2
UNLOCK
0
→
Battery voltage
→
0
BCM
Front door lock assembly (driver side)
Continuity
Connector
Terminal
Connector
Terminal
M119
8
D9
1
Existed
9
2
BCM
Ground
Continuity
Connector
Terminal
M119
8
Not existed
9
DLK-62
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR LOCK ACTUATOR
PASSENGER SIDE : Description
INFOID:0000000003794851
Locks/unlocks the door with the signal from BCM.
PASSENGER SIDE : Component Function Check
INFOID:0000000003794852
1.
CHECK FUNCTION
1.
Use CONSULT-III to perform Active Test (“DOOR LOCK”).
2.
Touch “ALL LCK” or “ALL UNLK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-62, "PASSENGER SIDE : Diagnosis Procedure"
.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000003794853
1.
CHECK DOOR LOCK ACTUATOR OUTPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect front door lock assembly (passenger side).
3.
Check voltage between front door lock assembly (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> Replace front door lock assembly (passenger side). Refer to
.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1.
Disconnect BCM connector.
2.
Check continuity between BCM harness connector and front door lock assembly (passenger side) har-
ness connector.
3.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-78, "Removal and Installation"
NO
>> Repair or replace harness.
REAR LH
REAR LH : Description
INFOID:0000000003794854
Locks/unlocks the door with the signal from BCM.
(+)
(–)
Condition
Voltage (V)
(Approx.)
Front door lock assembly (passenger side)
Connector
Terminal
D48
1
Ground
Door lock and
unlock switch
UNLOCK
0
→
Battery voltage
→
0
2
LOCK
0
→
Battery voltage
→
0
BCM
Front door lock assembly (passenger side)
Continuity
Connector
Terminal
Connector
Terminal
M119
5
D48
1
Existed
8
2
BCM
Ground
Continuity
Connector
Terminal
M119
5
Not existed
8
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст