Nissan Teana J32. Instruction — part 993
HEATED SEAT SWITCH
SE-105
< ON-VEHICLE REPAIR >
[WITH VENTILATION SEAT]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR SEAT : Exploded View
INFOID:0000000003849130
REAR SEAT : Removal and Installation
INFOID:0000000003849131
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect from damage.
1.
Remove the switch panel (2). Refer to
2.
Remove heated seat switch (rear LH side) (1) from switch panel,
with flat- bladed screw driver (A).
NOTE:
The same procedure is also performed for rear RH side.
INSTALLATION
Install in the reverse order of removal.
1.
Heated seat switch (rear seat)
2.
Switch panel
JMJIA1843ZZ
: Pawl
JMJIA1845ZZ
SE-106
< ON-VEHICLE REPAIR >
[WITH VENTILATION SEAT]
VENTILATION SEAT SWITCH
VENTILATION SEAT SWITCH
FRONT SEAT
FRONT SEAT : Exploded View
INFOID:0000000003849132
FRONT SEAT : Removal and Installation
INFOID:0000000003849133
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect from damage.
1.
Remove the console switch finisher (2). Refer to
2.
Remove ventilation seat switch (driver side) (1) from console
switch finisher. With flat bladed screw driver (A).
NOTE:
The same procedure is also performed for passenger side.
INSTALLATION
Install in the reverse order of removal.
REAR SEAT
1.
Ventilation seat switch (driver seat)
2.
Console switch finisher
JMJIA1841ZZ
: Pawl
JMJIA1847ZZ
VENTILATION SEAT SWITCH
SE-107
< ON-VEHICLE REPAIR >
[WITH VENTILATION SEAT]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR SEAT : Exploded View
INFOID:0000000003849134
REAR SEAT : Removal and Installation
INFOID:0000000003849135
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect from damage.
1.
Remove the switch panel (2). Refer to
2.
Remove heated seat switch (rear LH side) (1) from switch panel.
With flat bladed screw driver (A).
NOTE:
The same procedure is also performed for rear RH side.
INSTALLATION
Install in the reverse order of removal.
1.
Ventilation seat switch (rear seat)
2.
Switch panel
JMJIA1844ZZ
: Pawl
JMJIA1848ZZ
SE-108
< FUNCTION DIAGNOSIS >
[WITHOUT VENTILATION SEAT]
POWER SEAT
FUNCTION DIAGNOSIS
POWER SEAT
System Description
INFOID:0000000003839942
BCM can operate regardless of the ignition switch position, because battery power is supplied at all times to
power seat switch.
SLIDING OPERATION
While operating the sliding switch located in power seat switch, sliding motor operates and adjusts the front
and back position of the seat.
RECLINING OPERATION
While operating the reclining switch located in power seat switch, reclining motor operates and adjusts the for-
ward and backward position of the seatback.
LIFTING OPERATION
While operating the lifting switch located in power seat switch (driver side), lifting motor operates and adjusts
the up and down position of the seat cushion.
Component Parts Location
INFOID:0000000003839943
Component Description
INFOID:0000000003839944
1.
Sliding switch and lifting switch (driv-
er side) B414
2.
Reclining switch (driver side) B414
3.
Reclining motor (driver side) B415
4.
Lifting motor (front) (driver side)
B417
5.
Sliding motor (driver side) B416
6.
Lifting motor (rear) (driver side) B418
A.
View with seat cushion pad and seat-
back pad are removed.
B.
Backside of seat cushion
(driver side)
JMJIA1948ZZ
Item
Function
BCM
Supplies at all times the power received from battery to power seat switch
Power seat switch
(driver side)
Built-in reclining switch, sliding switch and lifting switch, controls the power supplied to each motor
Power seat switch
(passenger side)
Built-in reclining switch, sliding switch, controls the power supplied to each motor
Reclining motor
With the power supplied from power seat switch, operates forward and backward movement of
seatback
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст