Nissan Leaf. Instruction — part 636
HIGH-MOUNTED STOP LAMP
EXL-145
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000010121405
Removal and Installation
INFOID:0000000010121406
REMOVAL
1. Remove rear spoiler. Refer to
EXT-36, "Removal and Installation"
.
2. Remove high-mounted stop lamp cover mounting screws, and then remove high-mounted stop lamp
cover.
3. Remove high-mounted stop lamp mounting screws.
4. Disconnect high-mounted stop lamp harness connector.
5. Remove high-mounted stop lamp.
INSTALLATION
Install in the reverse order of removal.
1.
Rear spoiler
2.
High-mounted stop lamp
3.
High-mounted stop lamp cover
4.
Rear washer nozzle
: N·m (kg-m, in-lb)
, : Indicates that the part is connected at points with same symbol in actual vehicle.
JMLIA2084GB
EXL-146
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Exploded View
INFOID:0000000010121407
Removal and Installation
INFOID:0000000010121408
CAUTION:
Disconnect the 12V battery negative terminal or remove the fuse to electric leakage. Refer to
"Precaution for Removing 12V Battery"
REMOVAL
1. Remove license plate lamp in numerical order shown in the fig-
ure.
2. Disconnect license plate lamp connector, and then remove license plate lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010121409
CAUTION:
• Disconnect the 12V battery negative terminal or remove the fuse to electric leakage. Refer to
"Precaution for Removing 12V Battery"
.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it to
prevent damage to the bulb.
• Never touch bulb by hand while it is lit or right after being turned off to prevent a burns.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1.
License plate lamp bulb socket
2.
License plate lamp bulb
3.
License plate lamp housing
: Pawl
JMLIA1663ZZ
JPLIA0056ZZ
LICENSE PLATE LAMP
EXL-147
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
1. Remove license plate lamp.
2. Turn the bulb socket counterclockwise and unlock it.
3. Remove the bulb from the socket.
EXL-148
< REMOVAL AND INSTALLATION >
[LED HEADLAMP]
REAR REFLEX REFLECTOR
REAR REFLEX REFLECTOR
Exploded View
INFOID:0000000010121410
Removal and Installation
INFOID:0000000010121411
REMOVAL
1. Remove rear bumper fascia. Refer to
EXT-17, "Removal and Installation"
2. Remove rear reflex reflector fixing screws and disengage fixing pawls, and then remove rear reflex reflec-
tor.
INSTALLATION
Install in the reverse order of removal.
1.
Reflex refractor
: Pawl
: N·m (kg-m, in-lb)
JMLIA1664GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст