Nissan Leaf. Instruction — part 427
DOOR SWITCH
DLK-203
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR SWITCH
Removal and Installation
INFOID:0000000010119904
REMOVAL
1. Remove the door switch bolt (A).
2. Disconnect the harness connector and remove the door switch
(1).
INSTALLATION
Installation is in the reverse order of removal.
JMKIA2173ZZ
DLK-204
< REMOVAL AND INSTALLATION >
DOOR REQUEST SWITCH
DOOR REQUEST SWITCH
DRIVER SIDE
DRIVER SIDE : Removal and Installation
INFOID:0000000010119905
The door request switch (driver side) is serviced as an assembly with the outside handle. Refer to
"OUTSIDE HANDLE : Removal and Installation"
.
PASSENGER SIDE
PASSENGER SIDE : Removal and Installation
INFOID:0000000010119906
The door request switch (passenger side) is serviced as an assembly with the outside handle. Refer to
193, "OUTSIDE HANDLE : Removal and Installation"
BACK DOOR
BACK DOOR : Removal and Installation
INFOID:0000000010119907
The back door request switch is serviced as an assembly with the back door opener switch. Refer to
.
INSIDE KEY ANTENNA
DLK-205
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INSIDE KEY ANTENNA
INSTRUMENT CENTER
INSTRUMENT CENTER : Removal and Installation
INFOID:0000000010119908
REMOVAL
1. Remove the cluster lid C. Refer to
IP-17, "Removal and Installation"
2. Remove the inside key antenna (instrument center) screw (A).
CAUTION:
Be careful not to drop mounting screw (A) into instrument
panel.
3. Disconnect the harness connector and remove the inside key
antenna (instrument center) (1).
INSTALLATION
Installation is in the reverse order of removal.
CENTER CONSOLE
CENTER CONSOLE : Removal and Installation
INFOID:0000000010119909
REMOVAL
1. Remove the shift selector finisher. Refer to
2. Disconnect the harness connector from the inside key antenna (center console).
3. Remove the inside key antenna (center console) screws and inside key antenna.
INSTALLATION
Installation is in the reverse order of removal.
REAR SEAT
REAR SEAT : Removal and Installation
INFOID:0000000010119910
REMOVAL
1. Remove the rear seat. Refer to
SE-40, "SEAT CUSHION : Removal and Installation"
2. Release the inside key antenna (rear seat) clip (A) using a suit-
able tool.
3. Disconnect the harness connector and remove the inside key
antenna (rear seat) (1).
INSTALLATION
Installation is in the reverse order of removal.
LUGGAGE ROOM
LUGGAGE ROOM : Removal and Installation
INFOID:0000000010119911
REMOVAL
JMKIA6340ZZ
JMKIA6341ZZ
DLK-206
< REMOVAL AND INSTALLATION >
INSIDE KEY ANTENNA
1. Remove the luggage floor upper finisher. Refer to
INT-42, "LUGGAGE FLOOR UPPER FINISHER :
.
2. Disconnect the harness connector and remove the inside key
antenna (luggage room) (1) using a suitable tool (A).
CAUTION:
• When removing and installing, use shop cloths to protect the
inside key antenna (luggage room) from damage.
• Be aware that mounting clips (B) may pop put.
INSTALLATION
Installation is in the reverse order of removal.
JMKIA6342ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст