Nissan Leaf. Instruction — part 1118
B0094 CRASH ZONE SENSOR
SRC-73
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B0094 CRASH ZONE SENSOR
Description
INFOID:0000000010876995
DTC B0094 CRASH ZONE SENSOR
The crash zone sensor is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will
monitor for opens and shorts in detected lines to the crash zone sensor.
PART LOCATION
SRC-6, "Component Parts Location"
.
DTC Description
INFOID:0000000010876996
DTC DETECTION LOGIC
POSSIBLE CAUSE
[B0094–11]
• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of crash zone sensor
• Internal malfunction of air bag diagnosis sensor unit
[B0094–23, B0094–24, B0094–25, B0094–28]
• Internal malfunction of crash zone sensor
• Internal malfunction of air bag diagnosis sensor unit
[B0094–81, B0094–93]
• Connection malfunction of harness or connector
• Internal malfunction of crash zone sensor
• Internal malfunction of air bag diagnosis sensor unit
[B0094–86]
• Air bag diagnosis sensor unit and crash zone sensor is different from the part specified
[B0094–88]
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of crash zone sensor
• Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE (With CONSULT)
1.
CHECK SELF-DIAG RESULT
1. Turn ignition switch ON.
2. Check for DTC using CONSULT.
DTC
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B0094–11
CRASH ZONE SENS
[Center Frontal Restraints
Sensor (Subfault)]
[GND-SHORT]
Crash zone sensor circuit is shorted to ground
B0094–23
[LOWER LIMIT ERR]
Lower limit value malfunction of crash zone sensor
B0094–24
[UPPER LIMIT ERR]
Upper limit value malfunction of crash zone sensor
B0094–25
[SELF-DIAG ERR]
Diagnosis malfunction of crash zone sensor
B0094–28
[OFFSET ERR]
Offset malfunction of crash zone sensor
B0094–81
[COMM ERR]
Communication malfunction of crash zone sensor
B0094–86
[UNMATCH]
Crash zone sensor is out of the specified specification
B0094–88
[OPEN]
Crash zone sensor circuit is open
B0094–93
[RESET]
Reset malfunction of crash zone sensor
SRC-74
< DTC/CIRCUIT DIAGNOSIS >
B0094 CRASH ZONE SENSOR
Is the DTC detected?
YES (Current DTC)>>Refer to
YES (Past DTC)>>GO TO 2.
NO
>> Inspection End.
2.
ERASE SELF-DIAG RESULT
Erase the DTC using CONSULT.
Can the DTC be erased?
YES
>> Inspection End.
NO
>> Refer to
DTC CONFIRMATION PROCEDURE (Without CONSULT)
1.
CHECK SELF-DIAG RESULT
1. Turn ignition switch ON.
2. Check the air bag warning lamp status. Refer to
SRC-11, "On Board Diagnosis Function"
.
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
Is the DTC detected?
YES
>> Refer to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000010876997
1.
HARNESS CONNECTOR
Visually inspect all applicable harness connectors for the following:
• Visible damage to connector or terminal
• Loose terminal
• Poor connection
NOTE:
All harness connectors should be inspected from the air bag diagnosis sensor unit to the end component
(including any in-line connectors).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform one of the following repairs:
• Visible damage: Replace the harness.
• Loose terminal: Secure the terminal.
• Poor connection: Secure the connection.
2.
CONFIRM DTC
1. Reconnect all harness connectors.
2. Turn ignition switch ON.
3. Check for DTC using CONSULT.
Is DTC still current?
YES
>> GO TO 3.
NO
>> Refer to
GI-53, "Intermittent Incident"
.
3.
WIRING HARNESS
Check the wiring harness for visible damage.
NOTE:
The entire wiring harness should be inspected from the air bag diagnosis sensor unit to the end component
(including any in-line connectors).
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace the harness.
4.
CONFIRM DTC
1. Reconnect all harness connectors.
B0094 CRASH ZONE SENSOR
SRC-75
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
2. Turn ignition switch ON.
3. Check for DTC using CONSULT.
Is DTC still current?
YES
>> GO TO 5.
NO
>> Refer to
GI-53, "Intermittent Incident"
.
5.
CRASH ZONE SENSOR
1. Replace the crash zone sensor. Refer to
SR-33, "Removal and Installation"
2. Turn ignition switch ON.
3. Check for DTC using CONSULT.
Is DTC still current?
YES
>> GO TO 6.
NO
>> Clear DTC. Inspection End.
6.
AIR BAG DIAGNOSIS SENSOR UNIT
1. Replace the air bag diagnosis sensor unit. Refer to
SR-38, "Removal and Installation"
2. Turn ignition switch ON.
3. Check for DTC using CONSULT.
Is DTC still current?
YES
>> GO TO 7.
NO
>> Clear DTC. Inspection End.
7.
RELATED HARNESS
Replace the related harness.
>> END
SRC-76
< DTC/CIRCUIT DIAGNOSIS >
B0096 FRONT SIDE AIR BAG SATELLITE SENSOR RH
B0096 FRONT SIDE AIR BAG SATELLITE SENSOR RH
Description
INFOID:0000000010876998
DTC B0096 FRONT SATELLITE SENSOR RH
The front side air bag satellite sensor RH is wired to the air bag diagnosis sensor unit. The air bag diagnosis
sensor unit will monitor the front side air bag satellite sensor RH for internal failures and its circuits for commu-
nication errors.
PART LOCATION
SRC-6, "Component Parts Location"
.
DTC Description
INFOID:0000000010876999
DTC DETECTION LOGIC
POSSIBLE CAUSE
[B0096–11]
• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of B-pillar satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0096–23, B0096–24, B0096–25, B0096–28]
• Internal malfunction of B-pillar satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0096–81, B0096–93]
• Connection malfunction of harness or connector
• Internal malfunction of B-pillar satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0096–86]
• Air bag diagnosis sensor unit and B-pillar satellite sensor RH is different from the part specified
[B0096–88]
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of B-pillar satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE (With CONSULT)
1.
CHECK SELF-DIAG RESULT
1. Turn ignition switch ON.
DTC
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B0096–11
B-PILLAR SAT SEN RH
[Right Frontal Restraints
Sensor 1(Subfault)]
[GND-SHORT]
B-pillar satellite sensor RH circuit is shorted to ground
B0096–23
[LOWER LIMIT ERR]
Lower limit value malfunction of B-pillar satellite sensor RH
B0096–24
[UPPER LIMIT ERR]
Upper limit value malfunction of B-pillar satellite sensor RH
B0096–25
[SELF-DIAG ERR]
Diagnosis malfunction of B-pillar satellite sensor RH
B0096–28
[OFFSET ERR]
Offset malfunction of B-pillar satellite sensor RH
B0096–81
[COMM ERR]
Communication malfunction of B-pillar satellite sensor RH
B0096–86
[UNMATCH]
B-pillar satellite sensor RH is out of the specified specification
B0096–88
[OPEN]
B-pillar satellite sensor RH circuit is open
B0096–93
[RESET]
Reset malfunction of B-pillar satellite sensor RH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст