Nissan Frontier D40. Instruction — part 791
INTERIOR ROOM LAMP
INL-119
< ON-VEHICLE REPAIR >
[WITHOUT POWER DOOR LOCKS]
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ON-VEHICLE REPAIR
INTERIOR ROOM LAMP
Removal and Installation
INFOID:0000000005567996
FRONT ROOM/MAP LAMP ASSEMBLY
Removal
The map lamp is replaced as part of the overhead console assembly.
Refer to
INT-24, "Removal and Installation"
.
: Vehicle front
: Metal clip
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.
Using a suitable tool (A), remove map lamp lens (1).
: Vehicle front
: Pawl
CAUTION:
Wrap a cloth around tool to protect the housing and lens.
2.
Release one side of the bulb (2) from the tab, then pull straight
downward to remove.
VANITY MIRROR LAMP
Removal
AWLIA0867ZZ
Map lamp bulb
: 12V - 8W
AWLIA1667ZZ
INL-120
< ON-VEHICLE REPAIR >
[WITHOUT POWER DOOR LOCKS]
INTERIOR ROOM LAMP
The vanity mirror lamp is replaced as part of the sunvisor assembly.
Refer to
INT-24, "Removal and Installation"
.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
The vanity mirror lamp bulb is replaced as part of the sunvisor assembly. Refer to
GLOVE BOX LAMP
Removal
1.
Remove lower instrument panel RH and glove box. Refer to
IP-11, "Removal and Installation"
2.
Rotate glove box lamp socket (3) with bulb (1) counterclockwise,
then pull away from lamp shield (2) on steering member to
remove.
: Vehicle front
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.
Remove glove box lamp.
2.
Pull bulb (2) straight out from glove box lamp socket (1) to
remove.
ROOM LAMP
Removal
ALLIA0583ZZ
AWLIA1668ZZ
Glove box lamp bulb
: 12V - 3.4W
ALLIA0321ZZ
INTERIOR ROOM LAMP
INL-121
< ON-VEHICLE REPAIR >
[WITHOUT POWER DOOR LOCKS]
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
1.
Using a suitable tool (A), release the pawls and remove the
room lamp lens (1).
: Pawl
CAUTION:
Wrap a cloth around tool to protect the housing and lens.
2.
Remove room lamp screws (2).
3.
Disconnect the connector, then remove room lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.
Using a suitable tool, release the pawls and remove the room lamp lens.
2.
Release the room lamp bulb retainers (1), then pull bulb (2)
straight out to remove.
AWLIA1680ZZ
Room lamp bulb
: 12V - 8W
ALLIA0326ZZ
INL-122
< ON-VEHICLE REPAIR >
[WITHOUT POWER DOOR LOCKS]
ILLUMINATION
ILLUMINATION
Removal and Installation
INFOID:0000000005567997
ILLUMINATION CONTROL SWITCH
Removal
The illumination control switch is replaced as a part of the combina-
tion meter assembly. Refer to
MWI-95, "Removal and Installation"
.
Installation
Installation is in the reverse order of removal.
A/T FINISHER LAMP
Removal
1.
Remove A/T finisher from center console. Refer to
.
2.
Rotate A/T finisher lamp socket (2) with bulb (3) counterclock-
wise, then pull away from finisher (1).
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.
Remove A/T finisher from center console. Refer to
.
2.
Remove A/T finisher lamp socket (1), then pull bulb (2) straight
out away from socket.
LKIA0579E
ALLIA0590ZZ
AT finisher lamp bulb
: 12V - 3W
ALLIA0321ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст