Nissan Frontier D40. Instruction — part 964
SEC-12
< FUNCTION DIAGNOSIS >
VEHICLE SECURITY SYSTEM
Condition of Deactivating The System
When one of the following operations is performed, the armed phase is canceled.
• Unlock the doors with keyfob.
• Use the mechanical key to unlock the driver door using the door key cylinder.
Component Parts Location - King Cab
INFOID:0000000005272583
1.
IPDM E/R E122, E123, E124
2.
BCM M18, M19, M20
(view with lower instrument panel LH
removed)
3.
Horn E3
(behind front combination lamp LH)
4.
Main power window and door lock/
unlock switch D7
5.
Power window and door lock/unlock
switch RH D105
6.
Front door lock assembly LH (key cylin-
der switch) D14
7.
Rear door switch upper
LH D211
RH D312
8.
Front door switch
LH D213
RH D314
9.
Rear door switch lower
LH D212
RH D313
10. Combination meter M24
ALKIA1387ZZ
VEHICLE SECURITY SYSTEM
SEC-13
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
Component Parts Location - Crew Cab
INFOID:0000000005272584
Component Description
INFOID:0000000005272585
1.
IPDM E/R E122, E123, E124
2.
BCM M18, M19, M20
(view with lower instrument panel LH
removed)
3.
Horn E3
(behind front combination lamp LH)
4.
Front door lock assembly LH (key
cylinder switch) D14
5.
Main power window and door lock/un-
lock switch D7
Power window and door lock/unlock
switch RH D105
6.
Front door switch
LH B8
RH B108
7.
Rear door switch
LH B18
RH B116
8.
Combination meter M24
ALKIA1388ZZ
Item
Function
BCM
Verifies the received signal from ignition key, then informs ECM whether to allow engine start.
Door switch
Provides the BCM with the status of each monitored door.
Security indicator
Indicates the status of the security system.
IPDM E/R
Controls the horn and headlamps operation.
Horn
Sounds when the vehicle security system is triggered.
SEC-14
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)
INFOID:0000000005549834
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.
IMMU
IMMU : CONSULT-III Function (BCM - IMMU)
INFOID:0000000005549835
DATA MONITOR
Diagnosis mode
Function Description
WORK SUPPORT
Changes the setting for each system function.
SELF-DIAG RESULTS
Displays the diagnosis results judged by BCM. Refer to
CAN DIAG SUPPORT MNTR
Monitors the reception status of CAN communication viewed from BCM.
DATA MONITOR
The BCM input/output signals are displayed.
ACTIVE TEST
The signals used to activate each device are forcibly supplied from BCM.
ECU IDENTIFICATION
The BCM part number is displayed.
CONFIGURATION
• Enables to read and save the vehicle specification.
• Enables to write the vehicle specification when replacing BCM.
System
Sub system selection item
Diagnosis mode
WORK SUPPORT
DATA MONITOR
ACTIVE TEST
BCM
BCM
×
Door lock
DOOR LOCK
×
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Interior room lamp timer
INT LAMP
×
×
×
Remote keyless entry system
MULTI REMOTE ENT
×
×
×
Exterior lamp
HEAD LAMP
×
×
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps
FLASHER
×
×
Air conditioner
AIR CONDITONER
×
Combination switch
COMB SW
×
Immobilizer
IMMU
×
×
Interior room lamp battery saver
BATTERY SAVER
×
×
×
Vehicle security system
THEFT ALM
×
×
×
RAP (retained accessory power)
RETAINED PWR
×
×
×
Signal buffer system
SIGNAL BUFFER
×
×
TPMS (tire pressure monitoring sys-
tem)
AIR PRESSURE MONITOR
×
×
×
Panic alarm system
PANIC ALARM
×
DIAGNOSIS SYSTEM (BCM)
SEC-15
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
ACTIVE TEST
THEFT ALM
THEFT ALM : CONSULT-III Function (BCM - THEFT ALM)
INFOID:0000000005549836
WORK SUPPORT
DATA MONITOR
ACTIVE TEST
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [ON/OFF].
Test Item
Description
SECURITY ALARM SET
This mode is able to confirm and change security alarm ON-OFF setting.
THEFT ALM TRG
The switch which triggered vehicle security alarm is recorded. This mode is able to confirm and
erase the record of vehicle security alarm. The trigger data can be erased by touching “CLEAR” on
CONSULT-III screen.
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Indicates ignition switch (ON) status judged from IGN signal (ignition power supply)
ACC ON SW [ON/OFF]
Indicates ignition switch (ACC) status judged from ACC signal (accessory power supply)
KEYLESS LOCK [ON/OFF]
Indicates lock signal status received from remote keyless entry receiver (integrated in the BCM)
KEYLESS UNLOCK [ON/OFF]
Indicates unlock signal status received from remote keyless entry receiver (integrated in the BCM)
DOOR SW-DR [ON/OFF]
Indicates switch status input from front door switch LH
DOOR SW-AS [ON/OFF]
Indicates switch status input from front door switch RH
DOOR SW-RR [ON/OFF]
Indicates switch status input from rear door switch RH
DOOR SW-RL [ON/OFF]
Indicates switch status input from rear door switch LH
KEY CYL LK-SW [ON/OFF]
Indicates lock switch status from door key cylinder switch
KEY CYL UN-SW [ON/OFF]
Indicates unlock switch status from door key cylinder switch
CDL LOCK SW [ON/OFF]
Indicates lock switch status from door lock and unlock switch
CDL UNLOCK SW [ON/OFF]
Indicates unlock switch status from door lock and unlock switch
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation. The lamp will be turned on when “ON”
on CONSULT-III screen is touched.
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation. The horns will be activated for 0.5 sec-
onds after “ON” on CONSULT-III screen is touched.
HEADLAMP(HI)
This test is able to check vehicle security lamp operation. The headlamps will be activated for 0.5
seconds after “ON” on CONSULT-III screen is touched.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст