Nissan Pathfinder (2006 year). Instruction — part 36
DISASSEMBLY
AT-279
D
E
F
G
H
I
J
K
L
M
A
B
AT
2006 Pathfinder
67. Remove snap ring from transmission case using suitable tool.
68. Remove servo assembly (with return spring) from transmission
case.
69. Remove return spring from servo assembly.
70. Remove O-rings from servo assembly.
71. Remove needle bearing (1) from rear extension (2WD models)
or adapter case (4WD models).
SCIA2333E
SCIA5679E
SCIA5717E
SCIA5719E
SCIA6179J
AT-280
DISASSEMBLY
2006 Pathfinder
72. Remove parking actuator support from rear extension (2WD
models) or adapter case (4WD models).
73. Remove parking pawl (with return spring) and pawl shaft from
rear extension (2WD models) or adapter case (4WD models).
74. Remove return spring (1) from parking pawl (2).
75. Remove rear oil seal from rear extension (2WD models) or
adapter case (4WD models) using suitable tool.
CAUTION:
Be careful not to scratch rear extension (2WD models) or
adapter case (4WD models).
SCIA3423E
SCIA3424E
SCIA6180J
SCIA5272E
REPAIR FOR COMPONENT PARTS
AT-281
D
E
F
G
H
I
J
K
L
M
A
B
AT
2006 Pathfinder
REPAIR FOR COMPONENT PARTS
PFP:00000
Oil Pump
ECS00EM3
COMPONENTS
DISASSEMBLY
1.
Remove oil pump housing from oil pump cover.
2.
Remove oil pump housing oil seal using suitable tool.
CAUTION:
Be careful not to scratch oil pump housing.
1.
O-ring
2.
Oil pump cover
3.
O-ring
4.
Oil pump housing
5.
Oil pump housing oil seal
SCIA5227E
SCIA5228E
SCIA2840E
AT-282
REPAIR FOR COMPONENT PARTS
2006 Pathfinder
3.
Remove O-ring from oil pump housing.
4.
Remove O-ring from oil pump cover.
ASSEMBLY
1.
Install O-ring to oil pump cover.
CAUTION:
●
Do not reuse O-ring.
●
Apply ATF to O-ring.
2.
Install O-ring to oil pump housing.
CAUTION:
●
Do not reuse O-ring.
●
Apply ATF to O-ring.
SCIA2841E
SCIA5230E
SCIA5230E
SCIA2841E
REPAIR FOR COMPONENT PARTS
AT-283
D
E
F
G
H
I
J
K
L
M
A
B
AT
2006 Pathfinder
3.
Install oil pump housing oil seal to the oil pump housing until it is
flush using Tool.
CAUTION:
●
Do not reuse oil seal.
●
Apply ATF to oil seal.
4.
After temporarily tightening the bolts for the oil pump housing to
the oil pump cover, tighten them in the sequence shown.
Tool number
: ST33400001 (J-26082)
SCIA5313E
Oil pump housing bolts
: 9.0 N·m (0.92 kg-m, 80 in-lb.)
SCIA6329E
AT-284
REPAIR FOR COMPONENT PARTS
2006 Pathfinder
Front Sun Gear, 3rd One-Way Clutch
ECS00EM4
COMPONENTS
DISASSEMBLY
1.
Remove snap ring from front sun gear using suitable tool.
2.
Remove 3rd one-way clutch from front sun gear.
1.
Front sun gear
2.
3rd one-way clutch
3.
Snap ring
SCIA3114E
SCIA3110E
SCIA3111E
REPAIR FOR COMPONENT PARTS
AT-285
D
E
F
G
H
I
J
K
L
M
A
B
AT
2006 Pathfinder
INSPECTION
3rd One-way Clutch
●
Check frictional surface for wear or damage.
CAUTION:
If necessary, replace the 3rd one-way clutch.
Front Sun Gear Snap Ring
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
Front Sun Gear
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front sun gear.
ASSEMBLY
1.
Install 3rd one-way clutch in front sun gear.
CAUTION:
Apply ATF to 3rd one-way clutch.
2.
Install snap ring in front sun gear using suitable tool.
3.
Check operation of 3rd one-way clutch.
a.
Hold oil pump assembly and turn front sun gear.
b.
Check 3rd one-way clutch for correct locking and unlocking
directions.
CAUTION:
If not as shown, check installation direction of 3rd one-way
clutch.
SCIA3111E
SCIA3110E
SCIA3131E
AT-286
REPAIR FOR COMPONENT PARTS
2006 Pathfinder
Front Carrier, Input Clutch, Rear Internal Gear
ECS00EM5
COMPONENTS
1.
Seal ring
2.
O-ring
3.
Needle bearing
4.
Bearing race
5.
Front carrier assembly
6.
Needle bearing
7.
Snap ring
8.
Snap ring
9.
Retaining plate
10. Driven plate
11.
Input clutch drum
12. Drive plate
13. Rear internal gear
SCIA6734E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст