Nissan Pathfinder (2006 year). Instruction — part 319
TRAILER TOW
LT-107
C
D
E
F
G
H
I
J
L
M
A
B
LT
2006 Pathfinder
With the ignition switch in the ON or START position, power is supplied
●
to ignition relay, located in the IPDM E/R, and
●
through 10A fuse [No. 1, located in the fuse block (J/B)]
●
to BCM terminal 38, and
●
through 10A fuse (No. 38, located in the IPDM E/R)
●
to IPDM E/R terminal 27, and
●
to trailer tow relay 2 terminal 1.
Ground is supplied
●
to BCM terminal 67 and
●
to electric brake (pre-wiring) terminal 1
●
through grounds M57, M61 and M79, and
●
to IPDM E/R terminals 38 and 59
●
to trailer tow relay 1 terminal 2
●
to trailer tow relay 2 terminal 2
●
to trailer connector terminal 1 (trailer tow 7 pin) or terminal 4 (trailer tow 4 pin), and
●
to trailer turn relay RH and LH terminal 2
●
through grounds E9, E15 and E24.
TRAILER TAIL LAMP OPERATION
The trailer tail lamps are controlled by the trailer tow relay 1.
With the lighting switch in the parking and tail lamp ON (1ST) position, AUTO position (and the auto light sys-
tem is activated) or headlamp ON (2ND) position, power is supplied from the tail lamp relay
●
through 10A fuse (No. 37, located in the IPDM E/R)
●
through IPDM E/R terminal 29
●
to trailer tow relay 1 terminal 1.
When energized, trailer tow relay 1 tail lamp power is supplied
●
through trailer tow relay 1 terminal 5
●
to trailer connector terminal 3.
TRAILER STOP, TURN SIGNAL AND HAZARD LAMP OPERATION
The trailer stop, turn signal and hazard lamps are controlled by the BCM. If either turn signal or the hazard
lamps are turned on, the BCM supplies voltage to the trailer turn relay RH or LH to make them flash. If the
BCM receives stop lamp switch signal, the BCM supplies voltage to the trailer turn relay RH and LH to make
them illuminate.
Left stop, turn signal and hazard lamp output is supplied
●
through BCM terminal 52
●
to trailer turn relay LH terminal 1
When energized, trailer turn relay LH supplies power to the left stop, turn signal, and hazard lamp
●
through trailer turn relay LH terminal 3
●
to trailer connector terminal 2 (trailer tow 7 pin) or terminal 1 (trailer tow 4 pin).
Right stop, turn signal and hazard lamp output is supplied
●
through BCM terminal 51
●
to trailer turn relay RH terminal 1
When energized, trailer turn relay RH supplies power to the right stop, turn signal, and hazard lamp
●
through trailer turn relay RH terminal 3
●
to trailer connector terminal 5 (trailer tow 7 pin) or terminal 2 (trailer tow 4 pin).
TRAILER POWER SUPPLY OPERATION
The trailer power supply (trailer tow 7 pin connector only) is controlled by trailer tow relay 2.
When the ignition switch is in the ON or START position, power is supplied
●
through 10A fuse (No. 38, located in the IPDM E/R)
●
through IPDM E/R terminal 27
LT-108
TRAILER TOW
2006 Pathfinder
●
to trailer tow relay 2 terminal 1.
When energized, trailer tow relay 2 power is supplied
●
through trailer tow relay 2 terminals 5 and 7
●
to trailer connector terminal 4.
TRAILER TOW
LT-109
C
D
E
F
G
H
I
J
L
M
A
B
LT
2006 Pathfinder
Schematic
EKS00FX6
WKWA4232E
LT-110
TRAILER TOW
2006 Pathfinder
Wiring Diagram — T/TOW —
EKS00FX7
WKWA4233E
TRAILER TOW
LT-111
C
D
E
F
G
H
I
J
L
M
A
B
LT
2006 Pathfinder
WKWA4234E
LT-112
TRAILER TOW
2006 Pathfinder
WKWA4235E
TRAILER TOW
LT-113
C
D
E
F
G
H
I
J
L
M
A
B
LT
2006 Pathfinder
WKWA4236E
LT-114
TRAILER TOW
2006 Pathfinder
WKWA4237E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст