Nissan Versa Note. Instruction — part 440
FRONT SPOILER
EXT-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
• Align portion (A) of front fascia side deflectors (LH/RH) to portion (B) of clearance between front bumper fas-
cia and front fender protector.
• Tighten front fascia side deflector (LH/RH) screws while pressing front fascia side deflectors (LH/RH) to front
bumper fascia.
JMKIB0740ZZ
EXT-34
< REMOVAL AND INSTALLATION >
COWL TOP
COWL TOP
Exploded View
INFOID:0000000008969521
1.
Cowl top side cover (RH)
2.
Front fender seal (RH)
3.
Cowl top extension
4.
EPT seal [t: 5.0 mm (0.197 in)]
5.
Cowl top cover seal
6.
Front fender seal (LH)
7.
One-way valve
8.
Cowl top cover
9.
Cowl top cover cap
10. Cowl top side cover (LH)
11. EPT seal [t: 3.0 mm (0.118 in)] 12. EPT seal [t: 15.0 mm (0.591 in)]
Front
Clip
Pawl
AWKIA2518ZZ
COWL TOP
EXT-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Removal and Installation
INFOID:0000000008969522
REMOVAL
1. Remove front wiper arms (LH/RH). Refer to
WW-68, "Removal and Installation"
2. Remove cowl top side covers (LH/RH).
3. Remove cowl top cover clips.
4. Pull forward to release cowl top cover from windshield.
CAUTION:
When performing the procedure after removing cowl top
cover, cover the lower end of windshield with urethane, etc.
to prevent damage to the windshield.
5. Disconnect the washer tube connector and harness clips.
6. Remove cowl top cover.
7. Remove the following parts after removing cowl top cover (if necessary).
• EPT seals
• Cowl top cover seal
• Washer tube
• Washer nozzles (LH/RH). Refer to
WW-65, "WASHER NOZZLE : Removal and Installation"
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Always replace EPT seals with new ones when reusing the cowl top cover.
• When installing EPT seal (2) of portion (A) on cowl top cover (1), install EPT seal by aligning to the
line of (B) and setting portion (C) in cowl top cover.
• After installing cowl top cover (2), check that side surface of EPT seal (1) makes contact with wind-
shield glass (3).
JMKIA8047ZZ
JMKIB0738ZZ
JMKIB0739ZZ
EXT-36
< REMOVAL AND INSTALLATION >
FENDER PROTECTOR
FENDER PROTECTOR
Exploded View
INFOID:0000000008969523
Removal and Installation
INFOID:0000000009444562
REMOVAL
1. Remove fender protector screws and clips.
2. Remove fender protector.
INSTALLATION
Installation is in the reverse order of removal.
1.
Front fender protector
A. J nut
Front
AWKIA2513ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст