Nissan Almera Tino V10. Instruction — part 66
WHEELARCH HEIGHT (UNLADEN*1)
NLSU0041
Unit: mm (in)
SFA818A
195/65R15
205/55R16
QG18
YD22
QG18
YD22
FR
RR
FR
RR
FR
RR
FR
RR
703 (27.68)
671 (26.42)
700 (27.56)
671 (26.42)
703 (27.68)
670 (26.38)
700 (27.56)
670 (26.38)
*1: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
*2: “Ground clearance up” model
WHEEL RUNOUT
NLSU0023
Wheel type
Aluminum
Steel wheel
Radial runout limit
mm (in)
0.3 (0.012)
0.5 (0.020)
Lateral runout limit
mm (in)
0.3 (0.012)
0.8 (0.031)
WHEEL BALANCE
NLSU0044
Maximum allowable unbalance
Dynamic (At rim flange) g (oz)
10 (0.35) (one side)
Static g (oz)
20 (0.71)
FRONT SUSPENSION
Service Data and Specifications (SDS) (Cont’d)
SU-16
SBR686C
Precautions
PRECAUTIONS
NLSU0024
I
When installing each rubber part, final tightening must be
carried out under unladen condition* with tires on ground.
Oil will shorten the life of rubber bushes. Be sure to wipe
off any spilled oil.
*: Fuel, radiator coolant and engine oil full. Spare tire, jack,
hand tools and mats in designated positions.
I
Use flare nut wrench when removing or installing brake
tubes.
I
After installing removed suspension parts, check wheel
alignment.
I
Do not jack up at the trailing arm and lateral link.
I
Always torque brake lines when installing.
I
Lock nuts are unreusable parts; always use new ones.
When replacing, do not wipe the oil off of the new lock nut
before tightening.
Preparation
COMMERCIAL SERVICE TOOLS
NLSU0026
Tool name
Description
Equivalent to
1 Flare nut crowfoot
2 Torque wrench
NT360
Removing and installing brake piping
a: 10 mm (0.39 in)
Spring compressor
NT717
Removing and installing coil spring
Noise, Vibration and Harshness (NVH)
Troubleshooting
NLSU0027
Refer to “Noise, Vibration and Harshness (NVH) Troubleshooting”,
“FRONT SUSPENSION”, SU-4.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
BR
ST
RS
BT
HA
SC
EL
IDX
REAR SUSPENSION
Precautions
SU-17
Components
NLSU0028
NRA027
1.
Shock absorber
2.
Torsion beam
3.
Control rod
4.
Lateral link
5.
Coil spring
REAR SUSPENSION
Components
SU-18
SMA525A
On-vehicle Service
REAR SUSPENSION PARTS
NLSU0029
Check axle and suspension parts for excessive play, wear or dam-
age.
I
Shake each rear wheel to check for excessive play.
SSU036
I
Retighten all nuts and bolts to the specified torque.
Tightening torque:
Refer to “REAR SUSPENSION”, SU-18.
SMA113
I
Check shock absorber for oil leakage or other damage.
I
Check wheelarch height. Refer to “On-vehicle Service”,
“FRONT SUSPENSION PARTS”, SU-6.
REAR WHEEL ALIGNMENT
NLSU0030
Before checking rear wheel alignment, be sure to make a prelimi-
nary inspection (Unladen*).
*: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand
tools and mats in designated positions.
SFA975B
Preliminary Inspection
NLSU0030S01
Aluminum wheel
NLSU0030S0101
1.
Check tires for wear and improper inflation.
2.
Check wheels for deformation, cracks and other damage. If
deformed, remove wheel and check wheel runout.
a.
Remove tire from aluminum wheel and mount on a tire balance
machine.
b.
Set dial indicator as shown in the illustration.
Wheel runout (Dial indicator value):
Refer to SDS, SU-16.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
BR
ST
RS
BT
HA
SC
EL
IDX
REAR SUSPENSION
On-vehicle Service
SU-19
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст