Nissan Almera Tino V10. Instruction — part 692
Ground is supplied to terminal 2 of each front turn signal lamp through body grounds E24 and E73.
Ground is supplied to terminal 1 of each side turn signal lamp through body grounds E24 and E73.
Ground is supplied to terminal 1 of each rear combination lamp through body grounds B24, B30 or D89 (LHD
models).
With power and ground supplied, the smart entrance control unit controls the flashing of the hazard warning
lamps, and smart entrance control unit sent flashing indicator signal (hazard warning signal) to combination
meter via CAN communication line.
I
to combination meter terminals 39 and 40
I
from smart entrance control unit terminals 8 and 11.
HAZARD REMINDER OPERATION FOR MULTI-REMOTE CONTROL SYSTEM
NLEL0430S04
When the doors are locked or unlocked by multi-remote controller, smart entrance control unit controls turn
lamps hazard reminder flashes as follows.
I
Locked operation: Flash once
I
Unlock operation: Flash twice
TURN SIGNAL AND HAZARD WARNING LAMPS
System Description (Cont’d)
EL-64
Wiring Diagram — TURN —
NLEL0431
LHD MODELS
NLEL0431S01
YEL940D
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
TURN SIGNAL AND HAZARD WARNING LAMPS
Wiring Diagram — TURN —
EL-65
YEL941D
TURN SIGNAL AND HAZARD WARNING LAMPS
Wiring Diagram — TURN — (Cont’d)
EL-66
RHD MODELS
NLEL0431S02
YEL045E
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
TURN SIGNAL AND HAZARD WARNING LAMPS
Wiring Diagram — TURN — (Cont’d)
EL-67
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст