Nissan Almera Tino V10. Instruction — part 230
ATC-116
BLOWER MOTOR
BLOWER MOTOR
PFP:27226
Removal and Installation
EJS00310
1.
Remove the blower unit. Refer to
.
2.
Remove the auto amp.
3.
Remove the blower unit fixing screw, then separate the blower
unit.
4.
Remove the cooling hose and blower fan.
RJIA0169E
RJIA0356E
INTAKE DOOR MOTOR
ATC-117
C
D
E
F
G
H
I
K
L
M
A
B
ATC
INTAKE DOOR MOTOR
PFP:27730
Removal and Installation
EJS00311
1.
Remove the blower unit. Refer to
2.
Remove the intake door motor from the blower unit.
RJIA0822E
RJIA1721E
ATC-118
HEATER & COOLING UNIT ASSEMBLY
HEATER & COOLING UNIT ASSEMBLY
PFP:27110
Removal and Installation
EJS00312
REMOVAL
1.
Use the refrigerant collecting equipment (For HFC-134a) to dis-
charge the refrigerant from A/C system.
2.
Drain coolant from cooling system. Refer to LC-18, "Changing
Engine Coolant" for QG engine, LC-40, "Changing Engine Cool-
ant" for YD engine.
3.
Disconnect two heater hoses from heater core pipe.
4.
Disconnect the low-pressure flexible hose and high-pressure
pipe from the evaporator.
CAUTION:
Cap or wrap the joint of the low-pressure flexible hose and the
high-pressure pipe with a suitable tool such as a vinyl tape to
avoid the entry of air.
5.
Remove the instrument panel assembly.
6.
Remove the blower unit.
7.
Remove clips of vehicle harness from steering member.
8.
Remove the instrument stay.
RJIA1734E
RJIA2333E
HEATER & COOLING UNIT ASSEMBLY
ATC-119
C
D
E
F
G
H
I
K
L
M
A
B
ATC
9.
Remove the fixing bolts from heater & cooling unit.
10. Remove the steering member.
11. Remove the heater & cooling unit.
INSTALLATION
1.
Installation is basically the reverse order of removal.
NOTE:
When filling radiator with coolant, refer to LC-18, "Changing Engine Coolant" for QG engine, LC-40, "Chang-
ing Engine Coolant" for YD engine.
RJIA2334E
RJIA1724E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст