Nissan Almera Tino V10. Instruction — part 283
YBT109
INSTRUMENT PANEL ASSEMBLY
Removal and Installation (Cont’d)
BT-26
Removal and Installation
NLBT0013
CAUTION:
I
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
1. Remove front and rear seats. Refer to “FRONT SEAT” and “REAR SEAT” for details, BT-45 and BT-48.
2. Remove front and rear seat belts. Refer to RS-5 and RS-7, “Front Seat Belt” and “Rear Seat Belt” for
details.
3. Remove carpet rear finish, front seat mounting cover and rear seat mounting cover. Refer to “LUGGAGE
ROOM TRIM” for details, BT-30.
4. Remove front and rear outer kicking plates.
5. Remove front and rear inner kicking plates.
6. Remove dash side finishers.
7. Remove front and rear body side welts.
8. Remove front pillar garnishes.
9. Remove center pillar lower garnishes.
10. Remove center pillar upper garnishes.
11. Remove front and rear room carpet.
12. Remove rear pillar garnish.
13. Remove rear parcel shelf side finish.
14. Remove luggage room carpet.
15. Remove luggage room rear plate.
16. Remove luggage room rear side plate.
17. Remove luggage room rear side lower finish.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
SIDE AND FLOOR TRIM
Removal and Installation
BT-27
NBT107
SIDE AND FLOOR TRIM
Removal and Installation (Cont’d)
BT-28
NBT108
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
SIDE AND FLOOR TRIM
Removal and Installation (Cont’d)
BT-29
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст