Nissan Murano. Instruction — part 164
AV-434
< DTC/CIRCUIT DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
STEERING SWITCH GROUND CIRCUIT
STEERING SWITCH GROUND CIRCUIT
Description
INFOID:0000000009721966
Transmits the steering switch signal to AV control unit.
Diagnosis Procedure
INFOID:0000000009721967
1.
CHECK STEERING SWITCH SIGNAL GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect AV control unit connector and spiral cable connector.
3.
Check continuity between AV control unit harness connector and spiral cable harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair harness or connector.
2.
CHECK SPIRAL CABLE
Check spiral cable.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace spiral cable. Refer to
3.
CHECK GROUND CIRCUIT
1.
Connect AV control unit connector.
2.
Check continuity between AV control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace AV control unit. Refer to
4.
CHECK STEERING SWITCH
Check steering switch. Refer to
AV-434, "Component Inspection"
.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace steering switch. Refer to
Component Inspection
INFOID:0000000009721968
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.
AV control unit
Spiral cable
Continuity
Connector
Terminal
Connector
Terminal
M178
15
M33
33
Existed
AV control unit
Ground
Continuity
Connector
Terminal
M178
15
Existed
AV
STEERING SWITCH GROUND CIRCUIT
AV-435
< DTC/CIRCUIT DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Standard
Between terminals 14 and 17
ENTER switch ON
: 2003 – 2043
Ω
switch ON
: 716 – 730
Ω
MENU DOWN switch ON
: 318 – 324
Ω
MENU UP switch ON
: 120 – 122
Ω
SOURCE switch ON
: 0
Ω
Between terminals 15 and 17
switch ON
: 716 – 730
Ω
switch ON
: 318 – 324
Ω
VOL UP switch ON
: 120 – 122
Ω
VOL DOWN switch ON
: 0
Ω
JSNIA0112GB
AV-436
< SYMPTOM DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
MULTI AV SYSTEM SYMPTOMS
SYMPTOM DIAGNOSIS
MULTI AV SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000009721969
RELATED TO NAVIGATION
RELATED TO HANDS-FREE PHONE (EXCEPT FOR MEXICO)
• Before performing diagnosis, confirm that the cellular phone being used by the customer is compatible with
the vehicle.
• It is possible that a malfunction is occurring due to a version change of the phone even though the phone is
a compatible type. This can be confirmed by changing the cellular phone to another compatible type, and
checking that it operates normally. It is important to determine whether the cause of the malfunction is the
vehicle or the cellular phone.
Check Compatibility
1.
Make sure the customer's Bluetooth
®
related concern is understood.
2.
Verify the customer's concern.
NOTE:
The customer's phone may be required, depending upon their concern.
3.
Write down the customer's phone brand, model, and service provider.
NOTE:
It is necessary to know the service provider. On occasion, a given phone may be on the approved list with
one provider, but may not be on the approved list with other providers.
4.
Go to “www.nissanusa.com/bluetooth/”.
a.
Using the website's search engine, find out if the customer's phone is on the approved list.
b.
If the customer's phone is NOT on the approved list:
Stop diagnosis here. The customer needs to obtain a Bluetooth
®
phone that is on the approved list before
any further action.
c.
If the feature related to the customer's concern shows as “N” (not compatible):
Stop diagnosis here. If the customer still wants the feature to function, they will need to get an approved
phone showing the feature as “Y” (compatible) in the “Basic Features” list.
d.
If the feature related to the customer's concern shows as “Y” (compatible):
Symptoms
Check items
Probable malfunction location
Multifunction switch and preset
switch operation does not work.
• All switches cannot be operated.
• “MULTI AV” is displayed on system
selection screen when the CONSULT
is started.
• Multifunction switch power supply and ground circuit
malfunction.
• AV communication circuit between AV control unit and
multifunction switch.
Perform “Self Diagnostic Result” of “MULTI AV” with
CONSULT. Refer to
• All switches cannot be operated.
• “MULTI AV” is not displayed on sys-
tem selection screen when the CON-
SULT is started.
AV control unit power supply and ground circuit malfunc-
tion. Refer to
AV-419, "AV CONTROL UNIT : Diagnosis
.
Only specified switch cannot be operat-
ed.
Multifunction switch or preset switch malfunction.
Perform multifunction switch and preset switch self-di-
agnosis function. Refer to
.
Fuel economy display is abnor-
mal.
There is malfunction in the CONSULT
“self-diagnosis result” of “MULTI AV”.
Perform detected DTC diagnosis.
Refer to
.
There is no malfunction in the CON-
SULT “self-diagnosis results” of “MULTI
AV”.
Ignition signal circuit malfunction.
Guide sound is not heard or too
low.
On the setting display select “system
sound (guide sound volume, etc.),” and
confirm that guide sound is ON.
AV control unit malfunction.
Replace AV control unit. Refer to
.
AV
MULTI AV SYSTEM SYMPTOMS
AV-437
< SYMPTOM DIAGNOSIS >
[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Perform diagnosis as per the following table.
RELATED TO HANDS-FREE PHONE (FOR MEXICO)
Symptoms
Check items
Probable malfunction location
Does not recognize cellular
phone connection. (no connec-
tion is displayed on the display
at the guide.)
Repeat the registration of cellular phone.
AV control unit malfunction.
Replace AV control unit. Refer to
.
Hands-free phone cannot be
established.
• Hands-free phone operation can be
made, but the communication cannot
be established.
• Hands-free phone operation can be
performed, however, voice between
each other cannot be heard during the
conversation.
The other party's voice cannot
be heard by hands-free phone.
Check the “microphone speaker” in In-
spection & Adjustment Mode if sound is
heard.
Originating sound is not heard
by the other party with hands-
free phone communication.
Sound operation function is normal.
Sound operation function does not work.
Microphone signal circuit malfunction.
Refer to
The system cannot be operat-
ed.
• The voice recognition can be controlled.
• Steering switch's ”VOL UP”, “VOL
DOWN” and “
” switch works, but
“
” it does not work.
Steering switch malfunction.
Replace steering switch. Refer to
.
Steering switch's “
”, ”VOL UP”, “VOL
DOWN” and “
” switches do not work.
Steering switch signal B circuit malfunction.
Refer to
All steering switches do not work.
Steering switch ground circuit malfunction.
Refer to
Symptoms
Check items
Probable malfunction location
Does not recognize cellular
phone connection. (no connec-
tion is displayed on the display
at the guide.)
Repeat the registration of cellular phone.
AV control unit malfunction.
Replace AV control unit. Refer to
.
Hands-free phone cannot be
established.
• Hands-free phone operation can be
made, but the communication cannot
be established.
• Hands-free phone operation can be
performed, however, voice between
each other cannot be heard during the
conversation.
The other party's voice cannot
be heard by hands-free phone.
Check the “microphone speaker” in In-
spection & Adjustment Mode if sound is
heard.
Originating sound is not heard
by the other party with hands-
free phone communication.
Sound operation function is normal.
Sound operation function does not work.
Microphone signal circuit malfunction.
Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст