Nissan Murano. Instruction — part 775
FOREWORD
This instruction contains maintenance and repair procedure for the 2014
NISSAN MURANO.
In order to assure your safety and the efficient functioning of the vehicle,
this instruction should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this instruction is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Instruction are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.
PLEASE HELP MAKE THIS SERVICE MANUAL BETTER!
Your comments are important to NISSAN and will help us to improve our Service Instructions.
Use this form to report any issues or comments you may have regarding our Service Instructions.
Please print this form and type or write your comments below. Mail or fax to:
Nissan North America, Inc.
Technical Service Information
39001 Sunrise Drive, P.O. Box 9200
Farmington Hills, MI USA 48331
FAX: (248) 488-3880
SERVICE MANUAL: Model:
Year:
PUBLICATION NO. (Refer to Quick Reference Index ):
Please describe any Instruction issues or problems in detail:
Page number(s)
Note: Please include a copy of each page, marked with your comments.
Are the trouble diagnosis procedures logical and easy to use? (circle your answer)
YES
NO
If no, what page number(s)?
Note: Please include a copy of each page, marked with your comments.
Please describe the issue or problem in detail:
Is the organization of the instruction clear and easy to follow? (circle your answer)
YES
NO
Please comment:
What information should be included in NISSAN Service Instructions to better support you in servicing or
repairing customer vehicles?
DATE:
YOUR NAME:
POSITION:
DEALER:
DEALER NO.:
ADDRESS:
CITY:
STATE/PROV./COUNTRY:
ZIP/POSTAL CODE:
QUICK REFERENCE CHART MURANO
QUICK REFERENCE CHART MURANO
PFP:00000
ENGINE TUNE-UP DATA (VQ35DE)
ELS0003W
Engine model
VQ35DE
Firing order
1-2-3-4-5-6
Idle speed
CVT (In “P” or “N” position)
rpm
600 ± 50
Ignition timing (BTDC at idle speed)
CVT (In “P” or “N” position)
12° ± 5°
Tensions of drive belt
Belt tension is not necessary, as it is automatically adjusted by
drive belt auto-tensioner.
Radiator cap relief pressure
kPa (kg/cm
2
, psi)
Standard
122.3 - 151.7 (1.2 - 1.5, 17.7 - 22.0)
Limit
108 (1.1, 15.6)
Cooling system leakage testing pres-
sure
kPa (kg/cm
2
, psi)
156 (1.59, 22.6)
Compression pressure
kPa (kg/cm
2
, psi)/rpm
Standard
1,275 (13.0, 185)/300
Minimum
981 (10.0, 142)/300
Spark plug
Make
DENSO
Standard type
FXE22HR11
Gap
Standard
1.1 mm (0.043 in)
Limit
1.4 mm (0.055 in)
2014
QUICK REFERENCE CHART MURANO
FRONT WHEEL ALIGNMENT
ELS0003X
FOR CALIFORNIA AND MEXICO MODELS
Measure value under unladen*
2
conditions.
*1: A difference when assuming the left side a standard.
*2: Fuel, engine coolant and lubricant are oil full. Spare tire, jack, hand tools and mats are in designated positions.
FOR CANADA MODELS
Measure value under unladen*
2
conditions.
*1: A difference when assuming the left side a standard.
*2: Fuel, engine coolant and lubricant are oil full. Spare tire, jack, hand tools and mats are in designated positions.
Item
Standard
Measurement wheel
Left side
Right side
Camber
Degree minute (Decimal degree)
Minimum
–1° 00′ (–1.00°)
–1° 15′ (–1.25°)
Nominal
–0° 15′ (–0.25°)
–0° 30′ (–0.50°)
Maximum
0° 30′ (0.50°)
0° 15′ (0.25°)
Left and right difference*
1
–0° 18′ (–0° 30′) - 0° 48′ (0.80°)
Caster
Degree minute (Decimal degree)
Minimum
3° 55′ (3.92°)
4° 15′ (4.25°)
Nominal
4° 40′ (4.67°)
5° 00′ (5.00°)
Maximum
5° 25′ (5.41°)
5° 45′ (5.75°)
Left and right difference*
1
–0° 18′ (–0° 30′) - 0° 48′ (0.80°)
Kingpin inclination
Degree minute (Decimal degree)
Minimum
12° 00′ (12.00°)
Nominal
12° 45′ (12.75°)
Maximum
13° 30′ (13.50°)
Toe-in
Total toe-in
Distance
Minimum
Out 0.5 mm (Out 0.019 in)
Nominal
In 1.5 mm (In 0.059 in)
Maximum
In 3.5 mm (In 0.137 in)
Total toe-angle
Degree minute (Decimal degree)
Minimum
Out 0° 02′ (Out 0.03°)
Nominal
In 0° 06′ (In 0.1°)
Maximum
In 0° 14′ (In 0.23°)
Item
Standard
Measurement wheel
Left side
Right side
Camber
Degree minute (Decimal degree)
Minimum
–1° 00′ (–1.00°)
–1° 15′ (–1.25°)
Nominal
–0° 15′ (–0.25°)
–0° 30′ (–0.50°)
Maximum
0° 30′ (0.50°)
0° 15′ (0.25°)
Left and right difference*
1
–0° 18′ (–0° 30′) - 0° 48′ (0.80°)
Caster
Degree minute (Decimal degree)
Minimum
3° 55′ (3.92°)
4° 10′ (4.17°)
Nominal
4° 40′ (4.67°)
4° 55′ (4.92°)
Maximum
5° 25′ (5.41°)
5° 40′ (5.66°)
Left and right difference*
1
–0° 18′ (–0.30°) - 0° 48′ (0.80°)
Kingpin inclination
Degree minute (Decimal degree)
Minimum
11° 55′ (11.92°)
Nominal
12° 40′ (12.67°)
Maximum
13° 25′ (13.41°)
Toe-in
Total toe-in
Distance
Minimum
Out 0.5 mm (Out 0.019 in)
Nominal
In 1.5 mm (In 0.059 in)
Maximum
In 3.5 mm (In 0.137 in)
Total toe-angle
Degree minute (Decimal degree)
Minimum
Out 0° 02′ (Out 0.03°)
Nominal
In 0° 06′ (In 0.1°)
Maximum
In 0° 14′ (In 0.23°)
2014
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст