Nissan Murano. Instruction — part 745
EXT-18
< REMOVAL AND INSTALLATION >
REAR BUMPER
REAR BUMPER
Exploded View
INFOID:0000000009720569
Removal and Installation
INFOID:0000000009720570
REMOVAL
CAUTION:
Bumper fascia is made of resin. Never apply strong force to it, and be careful to prevent contact with
oil.
1.
Fully open back door assembly.
2.
Remove rear combination lamp (LH/RH).
1.
Rear body complete
2.
Bumper side bracket LH
3.
Bumper stay LH
4.
Grommet
5.
Bumper fascia assembly
6.
Reflex reflector LH
7.
Reflex reflector RH
8.
Bumper side bracket RH
9.
Bumper stay RH
10. Bumper reinforcement
11.
Energy absorber
JMKIA1967ZZ
REAR BUMPER
EXT-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
3.
Remove clips (A) located under rear combination lamp (LH/RH).
4.
Remove screws (B) (LH/RH).
5.
Remove rear mudguard. Refer to
EXT-28, "Removal and Installation"
6.
Remove clips (A) of bumper fascia (1) underside (LH/RH).
7.
Remove clips (A) of bumper fascia underside.
8.
Remove screws (A) of bumper fascia front end upper (LH/RH).
JMKIA1968ZZ
JMKIA2035ZZ
JMKIA1970ZZ
JMKIA1971ZZ
EXT-20
< REMOVAL AND INSTALLATION >
REAR BUMPER
9.
Pull to release bumper fascia assembly (1) from bumper side
bracket.
10. Remove bumper fascia assembly.
CAUTION:
When removing bumper fascia assembly, 2 workers are required so as to prevent it from dropping.
11. Remove the following parts after removing rear bumper fascia.
• Bumper side bracket (LH/RH)
Remove bumper side bracket (1) fixing screws (A) (LH/RH),
and then remove bumper side bracket (LH/RH).
• Reflex reflector (LH/RH)
Remove reflex reflector (1) fixing screws (A) (LH/RH), and
then remove reflex reflector (LH/RH).
12. Remove energy absorber.
13. Remove bumper reinforcement mounting nuts (LH/RH), and then remove bumper reinforcement.
14. Remove bumper stay mounting bolts, and then remove bumper stay.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing, perform fitting adjustment.
: Pawl
JMKIA1972ZZ
JMKIA1973ZZ
JMKIA1974ZZ
Portion
Clearance
Rear bumper – Rear fender
A – A
0.0 – 1.0 mm (0.000 – 0.039 in)
Rear bumper – Rear combination lamp
B – B
0.5 – 3.5 mm (0.020 – 0.138 in)
Rear bumper – Back door
C – C
4.0 – 8.0 mm (0.157 – 0.315 in)
Rear bumper – Back door
D – D
5.0 – 9.0 mm (0.197 – 0.354 in)
FRONT GRILLE
EXT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT GRILLE
Exploded View
INFOID:0000000009720571
Removal and Installation
INFOID:0000000009720572
REMOVAL
1.
Fully open hood assembly.
2.
Remove radiator core support cover LH (1) fixing clips (A), and
then remove radiator core support cover LH.
3.
Remove radiator core support cover RH (2) fixing clips (B), and
then remove radiator core support cover RH.
1.
Radiator core support cover RH
2.
Fastener
3.
Front grille assembly
4.
Front emblem
5.
Radiator core support cover LH
: Pawl
JMKIA1975ZZ
JMKIA1976ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст